I recently purchased an osprey 100e card to use on my rhel 6.5 linux
machine. a card does show up in lspci. however, i don't seem to get
a /dev/video driver. when the cx23885 driver loads it tells me it
cannot recognize the card. i tried putting card=82 and card=83 when i
load the driver, but doesn't seem to help.
Googling around didn't seem to pull anything specific to fix the
issue, any insights into what might be wrong. As i understood it the
Osprey cards were well supported under linux, so i'm not sure what's
wrong
thanks
lspci
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8
PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04)
lspci -vvn -s 02:00.0
02:00.0 0400: 14f1:8880 (rev 04)
Subsystem: 1576:0100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4168
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover+ Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=1 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Kernel driver in use: cx23885
Kernel modules: cx23885
modprobe cx23885 debug=10
dmesg output
cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
cx23885[0]/0: cx23885_dev_setup() Memory configured for PCIe bridge type 887
cx23885[0]: Your board isn't known (yet) to the driver.
cx23885[0]: Try to pick one of the existing card configs via
cx23885[0]: card=<n> insmod option. Updating to the latest
cx23885[0]: version might help as well.
cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
cx23885[0]: card=0 -> UNKNOWN/GENERIC
...snipped...
CORE cx23885[0]: subsystem: 1576:0100, board: UNKNOWN/GENERIC
[card=0,autodetected]
cx23885[0]/0: cx23885_pci_quirks()
cx23885[0]/0: cx23885_dev_setup() tuner_type = 0x0 tuner_addr = 0x0
cx23885[0]/0: cx23885_dev_setup() radio_type = 0x0 radio_addr = 0x0
cx23885[0]/0: cx23885_reset()
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [VID A]
cx23885[0]/0: cx23885_sram_channel_setup() 0x000107b0 <- 0x00000040
cx23885[0]/0: cx23885_sram_channel_setup() 0x000107c0 <- 0x00000b80
cx23885[0]/0: cx23885_sram_channel_setup() 0x000107d0 <- 0x000016c0
cx23885[0]/0: [bridge 887] sram setup VID A: bpl=2880 lines=3
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch2]
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS1 B]
cx23885[0]/0: cx23885_sram_channel_setup() 0x00010870 <- 0x00005000
cx23885[0]/0: cx23885_sram_channel_setup() 0x00010880 <- 0x000052f0
cx23885[0]/0: cx23885_sram_channel_setup() 0x00010890 <- 0x000055e0
cx23885[0]/0: cx23885_sram_channel_setup() 0x000108a0 <- 0x000058d0
cx23885[0]/0: cx23885_sram_channel_setup() 0x000108b0 <- 0x00005bc0
cx23885[0]/0: [bridge 887] sram setup TS1 B: bpl=752 lines=5
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch4]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch5]
cx23885[0]/0: cx23885_sram_channel_setup() Configuring channel [TS2 C]
cx23885[0]/0: cx23885_sram_channel_setup() 0x000108d0 <- 0x00006000
cx23885[0]/0: cx23885_sram_channel_setup() 0x000108e0 <- 0x000062f0
cx23885[0]/0: cx23885_sram_channel_setup() 0x000108f0 <- 0x000065e0
cx23885[0]/0: cx23885_sram_channel_setup() 0x00010900 <- 0x000068d0
cx23885[0]/0: cx23885_sram_channel_setup() 0x00010910 <- 0x00006bc0
cx23885[0]/0: [bridge 887] sram setup TS2 C: bpl=752 lines=5
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch7]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch8]
cx23885[0]/0: cx23885_sram_channel_setup() Erasing channel [ch9]
cx23885_dev_checkrevision() Hardware revision = 0xd0
cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0,
mmio: 0xf7800000
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 34 for MSI/MSI-X
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
