On 09/24/2014 05:29 AM, chen.fang@xxxxxxxxxxxxx wrote:
Thanks a lot, Hans.
I know the reason that you use vm_iomap_memory() instead of remap_pfn_range(). But
according to my analysis, the sanity check is not suitable for v4l2 buffers mapping. You can check the
code logic to see this.
The logic relating to vm_pgoff might not be suitable, but other checks are.
OK, I've looked at this a bit more and what I don't understand is why this
has never caused problems before. Would this perhaps just work on intel
architecture? Most platform drivers that would typically use the arm
architecture use vb2 by now, so that might explain it.
Anyway, put back the relevant checks and I'll Ack it.
Migration to vb2 is not a quick job and it is not on our schedule yet.
You really should do this. At some point the old videobuf will go away.
More important, vb2 has support for the dmabuf API allowing you to share
buffers between v4l and drm/kms.
There are many other advantages of moving to vb2 including proper instrumentation
and a control flow that doesn't make you go insane like vb1 does.
And if you are still using the old v4l2-int-device API, then that's already
no longer available as an API and is only used by a staging driver that will
be removed soon. This is going to cause you major headaches if you want to
support recent and upcoming kernels.
Regards,
Hans
I just need you to check the code logic and make a decision for this.
Best regards,
Fancy Fang
-----Original Message-----
From: Hans Verkuil [mailto:hverkuil@xxxxxxxxx]
Sent: Tuesday, September 23, 2014 2:10 PM
To: Fang Chen-B47543; m.chehab@xxxxxxxxxxx; viro@xxxxxxxxxxxxxxxxxx
Cc: Guo Shawn-R65073; linux-media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Marek Szyprowski
Subject: Re: [PATCH] [media] videobuf-dma-contig: replace vm_iomap_memory() with remap_pfn_range().
Hi Fancy Fang,
I do have a few comments:
1) One reason why the switch to vm_iomap_memory() was made originally was that that function did a bunch of sanity checks. Since this patch moves back to
remap_pfn_range() those sanity checks are lost and should be reinstated.
2) You need Marek's Ack as well since he understands the memory code much better than I do.
3) There are efforts underway to make a modern i.mx6 video driver based on
vb2 and all the other modern V4L2 APIs, wouldn't it be much better if freescale jumps on board and starts working on that code as well? See e.g. this mail
thread: http://www.spinics.net/lists/linux-media/msg79078.html
I assume this refers to the same hardware. The official freescale driver for that hardware is horrendous.
If you are writing code for unrelated hardware, then you should move over to
vb2 yourself. videobuf should not be used anymore for new drivers.
4) I still do not entirely understand the control flow and I will have to take another look. I'll see if I can do that tomorrow.
Regards,
Hans
On 09/23/2014 05:11 AM, chen.fang@xxxxxxxxxxxxx wrote:
Hans,
Do you have any more comment on this patch?
Best regards,
Fancy Fang
-----Original Message-----
From: Fang Chen-B47543
Sent: Wednesday, September 10, 2014 3:29 PM
To: 'Hans Verkuil'; m.chehab@xxxxxxxxxxx; viro@xxxxxxxxxxxxxxxxxx
Cc: Guo Shawn-R65073; linux-media@xxxxxxxxxxxxxxx;
linux-kernel@xxxxxxxxxxxxxxx; Marek Szyprowski
Subject: RE: [PATCH] [media] videobuf-dma-contig: replace vm_iomap_memory() with remap_pfn_range().
On the Freescale imx6 platform which belongs to ARM architecture. The driver is our local v4l2 output driver which is not upstream yet unfortunately.
Best regards,
Fancy Fang
-----Original Message-----
From: Hans Verkuil [mailto:hverkuil@xxxxxxxxx]
Sent: Wednesday, September 10, 2014 3:21 PM
To: Fang Chen-B47543; m.chehab@xxxxxxxxxxx; viro@xxxxxxxxxxxxxxxxxx
Cc: Guo Shawn-R65073; linux-media@xxxxxxxxxxxxxxx;
linux-kernel@xxxxxxxxxxxxxxx; Marek Szyprowski
Subject: Re: [PATCH] [media] videobuf-dma-contig: replace vm_iomap_memory() with remap_pfn_range().
On 09/10/14 09:14, chen.fang@xxxxxxxxxxxxx wrote:
It is not a theoretically issue, it is a real case that the mapping failed issue happens in 3.14.y kernel but not happens in previous 3.10.y kernel.
So I need your confirmation on it.
With which driver does this happen? On which architecture?
Regards,
Hans
Thanks.
Best regards,
Fancy Fang
-----Original Message-----
From: Hans Verkuil [mailto:hverkuil@xxxxxxxxx]
Sent: Wednesday, September 10, 2014 3:01 PM
To: Fang Chen-B47543; m.chehab@xxxxxxxxxxx; viro@xxxxxxxxxxxxxxxxxx
Cc: Guo Shawn-R65073; linux-media@xxxxxxxxxxxxxxx;
linux-kernel@xxxxxxxxxxxxxxx; Marek Szyprowski
Subject: Re: [PATCH] [media] videobuf-dma-contig: replace vm_iomap_memory() with remap_pfn_range().
On 09/10/14 07:28, Fancy Fang wrote:
When user requests V4L2_MEMORY_MMAP type buffers, the videobuf-core
will assign the corresponding offset to the 'boff' field of the
videobuf_buffer for each requested buffer sequentially. Later, user
may call mmap() to map one or all of the buffers with the 'offset'
parameter which is equal to its 'boff' value. Obviously, the 'offset'
value is only used to find the matched buffer instead of to be the
real offset from the buffer's physical start address as used by
vm_iomap_memory(). So, in some case that if the offset is not zero,
vm_iomap_memory() will fail.
Is this just a fix for something that can fail theoretically, or do you actually have a case where this happens? I am very reluctant to make any changes to videobuf. Drivers should all migrate to vb2.
I have CC-ed Marek as well since he knows a lot more about this stuff than I do.
Regards,
Hans
Signed-off-by: Fancy Fang <chen.fang@xxxxxxxxxxxxx>
---
drivers/media/v4l2-core/videobuf-dma-contig.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/videobuf-dma-contig.c
b/drivers/media/v4l2-core/videobuf-dma-contig.c
index bf80f0f..8bd9889 100644
--- a/drivers/media/v4l2-core/videobuf-dma-contig.c
+++ b/drivers/media/v4l2-core/videobuf-dma-contig.c
@@ -305,7 +305,9 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
/* Try to remap memory */
size = vma->vm_end - vma->vm_start;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- retval = vm_iomap_memory(vma, mem->dma_handle, size);
+ retval = remap_pfn_range(vma, vma->vm_start,
+ mem->dma_handle >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
if (retval) {
dev_err(q->dev, "mmap: remap failed with error %d. ",
retval);
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
