Hi, I want to turn my Netgear ReadyNAS RN104 into a VDR. I already run a self made kernel 3.16.3) and plain debian on it. For hardware and software details see http://natisbad.org/NAS3/ I recently compiled those DVB modules into the kernel. And after a lot of struggle to get a clean build, I succeeded in loading the modules: dvb_usb_technisat_usb2, dvb_usb, dvb_core, stv090x, rc_core but device recognition somehow does not fully work. usb 2-1: new high-speed USB device number 3 using xhci_hcd usb 2-1: New USB device found, idVendor=14f7, idProduct=0500 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: TechniSat USB device usb 2-1: Manufacturer: TechniSat Digital usb 2-1: SerialNumber: ************ technisat-usb2: set alternate setting technisat-usb2: firmware version: 17.63 dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. dvb-usb: Technisat SkyStar USB HD (DVB-S/S2) error while loading driver (-12) usbcore: registered new interface driver dvb_usb_technisat_usb2 How my I find out more about the error -12? It's a lot of wrapped "return ret" in the code... Is there any way of enabling more logging? I believe it comes from the dvb-usb-technisat-usb2 module, but there is no c file? thanks. Jan -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
