remove ci support part in v1 patch.
hook demod read status and set voltage operations.
add m88ts2022 select in Kconfig.
move usb buffer into state for usb ctrl.
make checkpatch.pl happy.
Signed-off-by: Nibble Max <nibble.max@xxxxxxxxx>
---
drivers/media/usb/dvb-usb-v2/Kconfig | 7 +
drivers/media/usb/dvb-usb-v2/Makefile | 3 +
drivers/media/usb/dvb-usb-v2/dvbsky.c | 460 ++++++++++++++++++++++++++++++++++
3 files changed, 470 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index 66645b0..5b34323 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -141,3 +141,10 @@ config DVB_USB_RTL28XXU
help
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
+config DVB_USB_DVBSKY
+ tristate "DVBSky USB support"
+ depends on DVB_USB_V2
+ select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the USB receivers from DVBSky.
diff --git a/drivers/media/usb/dvb-usb-v2/Makefile b/drivers/media/usb/dvb-usb-v2/Makefile
index bc38f03..f10d4df 100644
--- a/drivers/media/usb/dvb-usb-v2/Makefile
+++ b/drivers/media/usb/dvb-usb-v2/Makefile
@@ -37,6 +37,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
dvb-usb-rtl28xxu-objs := rtl28xxu.o
obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
+dvb-usb-dvbsky-objs := dvbsky.o
+obj-$(CONFIG_DVB_USB_DVBSKY) += dvb-usb-dvbsky.o
+
ccflags-y += -I$(srctree)/drivers/media/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
ccflags-y += -I$(srctree)/drivers/media/tuners
diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c b/drivers/media/usb/dvb-usb-v2/dvbsky.c
new file mode 100644
index 0000000..34688c8
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c
@@ -0,0 +1,460 @@
+/*
+ * Driver for DVBSky USB2.0 receiver
+ *
+ * Copyright (C) 2013 Max nibble <nibble.max@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dvb_usb.h"
+#include "m88ds3103.h"
+#include "m88ts2022.h"
+
+#define DVBSKY_MSG_DELAY 0/*2000*/
+#define DVBSKY_BUF_LEN 64
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct dvbsky_state {
+ struct mutex stream_mutex;
+ u8 ibuf[DVBSKY_BUF_LEN];
+ u8 obuf[DVBSKY_BUF_LEN];
+ u8 last_lock;
+ struct i2c_client *i2c_client_tuner;
+
+ /* fe hook functions*/
+ int (*fe_set_voltage)(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage);
+ int (*fe_read_status)(struct dvb_frontend *fe,
+ fe_status_t *status);
+};
+
+static int dvbsky_usb_generic_rw(struct dvb_usb_device *d,
+ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+ int ret;
+ struct dvbsky_state *state = d_to_priv(d);
+
+ mutex_lock(&d->usb_mutex);
+ if (wlen != 0)
+ memcpy(state->obuf, wbuf, wlen);
+
+ ret = dvb_usbv2_generic_rw_locked(d, state->obuf, wlen,
+ state->ibuf, rlen);
+
+ if (!ret && (rlen != 0))
+ memcpy(rbuf, state->ibuf, rlen);
+
+ mutex_unlock(&d->usb_mutex);
+ return ret;
+}
+
+static int dvbsky_stream_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+ struct dvbsky_state *state = d_to_priv(d);
+ int ret;
+ u8 obuf_pre[3] = { 0x37, 0, 0 };
+ u8 obuf_post[3] = { 0x36, 3, 0 };
+
+ mutex_lock(&state->stream_mutex);
+ ret = dvbsky_usb_generic_rw(d, obuf_pre, 3, NULL, 0);
+ if (!ret && onoff) {
+ msleep(20);
+ ret = dvbsky_usb_generic_rw(d, obuf_post, 3, NULL, 0);
+ }
+ mutex_unlock(&state->stream_mutex);
+ return ret;
+}
+
+static int dvbsky_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+
+ return dvbsky_stream_ctrl(d, (onoff == 0) ? 0 : 1);
+}
+
+/* GPIO */
+static int dvbsky_gpio_ctrl(struct dvb_usb_device *d, u8 gport, u8 value)
+{
+ int ret;
+ u8 obuf[3], ibuf[2];
+
+ obuf[0] = 0x0e;
+ obuf[1] = gport;
+ obuf[2] = value;
+ ret = dvbsky_usb_generic_rw(d, obuf, 3, ibuf, 1);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
+ KBUILD_MODNAME, __func__, ret);
+ return ret;
+}
+
+/* I2C */
+static int dvbsky_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret = 0;
+ u8 ibuf[64], obuf[64];
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num > 2) {
+ dev_err(&d->udev->dev,
+ "dvbsky_usb: too many i2c messages[%d] than 2.", num);
+ ret = -EOPNOTSUPP;
+ goto i2c_error;
+ }
+
+ if (num == 1) {
+ if (msg[0].len > 60) {
+ dev_err(&d->udev->dev,
+ "dvbsky_usb: too many i2c bytes[%d] than 60.",
+ msg[0].len);
+ ret = -EOPNOTSUPP;
+ goto i2c_error;
+ }
+ if (msg[0].flags & I2C_M_RD) {
+ /* single read */
+ obuf[0] = 0x09;
+ obuf[1] = 0;
+ obuf[2] = msg[0].len;
+ obuf[3] = msg[0].addr;
+ ret = dvbsky_usb_generic_rw(d, obuf, 4,
+ ibuf, msg[0].len + 1);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
+ KBUILD_MODNAME, __func__, ret);
+ if (!ret)
+ memcpy(msg[0].buf, &ibuf[1], msg[0].len);
+ } else {
+ /* write */
+ obuf[0] = 0x08;
+ obuf[1] = msg[0].addr;
+ obuf[2] = msg[0].len;
+ memcpy(&obuf[3], msg[0].buf, msg[0].len);
+ ret = dvbsky_usb_generic_rw(d, obuf,
+ msg[0].len + 3, ibuf, 1);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
+ KBUILD_MODNAME, __func__, ret);
+ }
+ } else {
+ if ((msg[0].len > 60) || (msg[1].len > 60)) {
+ dev_err(&d->udev->dev,
+ "dvbsky_usb: too many i2c bytes[w-%d][r-%d] than 60.",
+ msg[0].len, msg[1].len);
+ ret = -EOPNOTSUPP;
+ goto i2c_error;
+ }
+ /* write then read */
+ obuf[0] = 0x09;
+ obuf[1] = msg[0].len;
+ obuf[2] = msg[1].len;
+ obuf[3] = msg[0].addr;
+ memcpy(&obuf[4], msg[0].buf, msg[0].len);
+ ret = dvbsky_usb_generic_rw(d, obuf,
+ msg[0].len + 4, ibuf, msg[1].len + 1);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
+ KBUILD_MODNAME, __func__, ret);
+
+ if (!ret)
+ memcpy(msg[1].buf, &ibuf[1], msg[1].len);
+ }
+i2c_error:
+ mutex_unlock(&d->i2c_mutex);
+ return (ret) ? ret : num;
+}
+
+static u32 dvbsky_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dvbsky_i2c_algo = {
+ .master_xfer = dvbsky_i2c_xfer,
+ .functionality = dvbsky_i2c_func,
+};
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int dvbsky_rc_query(struct dvb_usb_device *d)
+{
+ u32 code = 0xffff, scancode;
+ u8 rc5_command, rc5_system;
+ u8 obuf[2], ibuf[2], toggle;
+ int ret;
+
+ obuf[0] = 0x10;
+ ret = dvbsky_usb_generic_rw(d, obuf, 1, ibuf, 2);
+ if (ret)
+ dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
+ KBUILD_MODNAME, __func__, ret);
+ if (ret == 0)
+ code = (ibuf[0] << 8) | ibuf[1];
+ if (code != 0xffff) {
+ dev_dbg(&d->udev->dev, "rc code: %x\n", code);
+ rc5_command = code & 0x3F;
+ rc5_system = (code & 0x7C0) >> 6;
+ toggle = (code & 0x800) ? 1 : 0;
+ scancode = rc5_system << 8 | rc5_command;
+ rc_keydown(d->rc_dev, RC_TYPE_RC5, scancode, toggle);
+ }
+ return 0;
+}
+
+static int dvbsky_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ rc->allowed_protos = RC_BIT_RC5;
+ rc->query = dvbsky_rc_query;
+ rc->interval = 300;
+ return 0;
+}
+#else
+ #define dvbsky_get_rc_config NULL
+#endif
+
+static int dvbsky_usb_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct dvbsky_state *state = d_to_priv(d);
+ u8 value;
+
+ if (voltage == SEC_VOLTAGE_OFF)
+ value = 0;
+ else
+ value = 1;
+ dvbsky_gpio_ctrl(d, 0x80, value);
+
+ return state->fe_set_voltage(fe, voltage);
+}
+
+static int dvbsky_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6])
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ u8 obuf[] = { 0x1e, 0x00 };
+ u8 ibuf[6] = { 0 };
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x51,
+ .flags = 0,
+ .buf = obuf,
+ .len = 2,
+ }, {
+ .addr = 0x51,
+ .flags = I2C_M_RD,
+ .buf = ibuf,
+ .len = 6,
+ }
+ };
+
+ if (i2c_transfer(&d->i2c_adap, msg, 2) == 2)
+ memcpy(mac, ibuf, 6);
+
+ dev_info(&d->udev->dev, "dvbsky_usb MAC address=%pM\n", mac);
+
+ return 0;
+}
+
+static int dvbsky_usb_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct dvbsky_state *state = d_to_priv(d);
+ int ret;
+
+ ret = state->fe_read_status(fe, status);
+
+ /* it need resync slave fifo when signal change from unlock to lock.*/
+ if ((*status & FE_HAS_LOCK) && (!state->last_lock))
+ dvbsky_stream_ctrl(d, 1);
+
+ state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
+ return ret;
+}
+
+static const struct m88ds3103_config dvbsky_s960_m88ds3103_config = {
+ .i2c_addr = 0x68,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .clock_out = 0,
+ .ts_mode = M88DS3103_TS_CI,
+ .ts_clk = 16000,
+ .ts_clk_pol = 0,
+ .agc = 0x99,
+ .lnb_hv_pol = 1,
+ .lnb_en_pol = 1,
+};
+
+static int dvbsky_s960_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvbsky_state *state = adap_to_priv(adap);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+ /* demod I2C adapter */
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_client *client;
+ struct i2c_board_info info;
+ struct m88ts2022_config m88ts2022_config = {
+ .clock = 27000000,
+ };
+ memset(&info, 0, sizeof(struct i2c_board_info));
+
+ /* attach demod */
+ adap->fe[0] = dvb_attach(m88ds3103_attach,
+ &dvbsky_s960_m88ds3103_config,
+ &d->i2c_adap,
+ &i2c_adapter);
+ if (!adap->fe[0]) {
+ dev_err(&d->udev->dev, "dvbsky_s960_attach fail.\n");
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ /* attach tuner */
+ m88ts2022_config.fe = adap->fe[0];
+ strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &m88ts2022_config;
+ request_module("m88ts2022");
+ client = i2c_new_device(i2c_adapter, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ dvb_frontend_detach(adap->fe[0]);
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ dvb_frontend_detach(adap->fe[0]);
+ ret = -ENODEV;
+ goto fail_attach;
+ }
+
+ /* delegate signal strength measurement to tuner */
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
+
+ /* hook fe: need to resync the slave fifo when signal locks. */
+ state->fe_read_status = adap->fe[0]->ops.read_status;
+ adap->fe[0]->ops.read_status = dvbsky_usb_read_status;
+
+ /* hook fe: LNB off/on is control by Cypress usb chip. */
+ state->fe_set_voltage = adap->fe[0]->ops.set_voltage;
+ adap->fe[0]->ops.set_voltage = dvbsky_usb_set_voltage;
+
+ state->i2c_client_tuner = client;
+
+fail_attach:
+ return ret;
+}
+
+static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ dvbsky_gpio_ctrl(d, 0x04, 1);
+ msleep(20);
+ dvbsky_gpio_ctrl(d, 0x83, 0);
+ dvbsky_gpio_ctrl(d, 0xc0, 1);
+ msleep(100);
+ dvbsky_gpio_ctrl(d, 0x83, 1);
+ dvbsky_gpio_ctrl(d, 0xc0, 0);
+ msleep(50);
+
+ return WARM;
+}
+
+static int dvbsky_init(struct dvb_usb_device *d)
+{
+ struct dvbsky_state *state = d_to_priv(d);
+
+ /* use default interface */
+ /*
+ ret = usb_set_interface(d->udev, 0, 0);
+ if (ret)
+ return ret;
+ */
+ mutex_init(&state->stream_mutex);
+
+ state->last_lock = 0;
+
+ return 0;
+}
+
+static void dvbsky_exit(struct dvb_usb_device *d)
+{
+ struct dvbsky_state *state = d_to_priv(d);
+ struct i2c_client *client;
+
+ client = state->i2c_client_tuner;
+ /* remove I2C tuner */
+ if (client) {
+ module_put(client->dev.driver->owner);
+ i2c_unregister_device(client);
+ }
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties dvbsky_s960_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct dvbsky_state),
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
+ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
+
+ .i2c_algo = &dvbsky_i2c_algo,
+ .frontend_attach = dvbsky_s960_attach,
+ .init = dvbsky_init,
+ .get_rc_config = dvbsky_get_rc_config,
+ .streaming_ctrl = dvbsky_streaming_ctrl,
+ .identify_state = dvbsky_identify_state,
+ .exit = dvbsky_exit,
+ .read_mac_address = dvbsky_read_mac_addr,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
+ }
+ }
+};
+
+static const struct usb_device_id dvbsky_id_table[] = {
+ { DVB_USB_DEVICE(0x0572, 0x6831,
+ &dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
+
+static struct usb_driver dvbsky_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = dvbsky_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .reset_resume = dvb_usbv2_reset_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(dvbsky_usb_driver);
+
+MODULE_AUTHOR("Max nibble <nibble.max@xxxxxxxxx>");
+MODULE_DESCRIPTION("Driver for DVBSky USB");
+MODULE_LICENSE("GPL");
