On Mon, Jun 16, 2014 at 12:11:18PM +0200, Denis Carikli wrote:
> Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
> ---
> ChangeLog v13->v14:
> - Rebased
> ChangeLog 12->v13:
> - No changes
> ChangeLog 11->v12:
> - Improved the define names to match the hardware:
> ENABLE_POL is not a clock signal but instead an enable signal.
>
> ChangeLog v9->v10:
> - New patch which was splitted out from:
> "staging: imx-drm: Use de-active and pixelclk-active display-timings.".
> - Fixes many issues in "staging: imx-drm: Use de-active and pixelclk-active
> display-timings.":
> - More clear meaning of the polarity settings.
> - The SET_CLK_POL and SET_DE_POL masks are not
> needed anymore.
> ---
> drivers/gpu/ipu-v3/ipu-di.c | 4 ++--
> drivers/staging/imx-drm/ipuv3-crtc.c | 4 ++--
> include/video/imx-ipu-v3.h | 8 +++++++-
> 3 files changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
> index c490ba4..d00f357 100644
> --- a/drivers/gpu/ipu-v3/ipu-di.c
> +++ b/drivers/gpu/ipu-v3/ipu-di.c
> @@ -595,7 +595,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
> }
> }
>
> - if (sig->clk_pol)
> + if (sig->clk_pol == CLK_POL_POSEDGE)
> di_gen |= DI_GEN_POLARITY_DISP_CLK;
>
> ipu_di_write(di, di_gen, DI_GENERAL);
> @@ -606,7 +606,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
> reg = ipu_di_read(di, DI_POL);
> reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
>
> - if (sig->enable_pol)
> + if (sig->enable_pol == ENABLE_POL_HIGH)
> reg |= DI_POL_DRDY_POLARITY_15;
> if (sig->data_pol)
> reg |= DI_POL_DRDY_DATA_POLARITY;
> diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
> index 720868b..7fec438 100644
> --- a/drivers/staging/imx-drm/ipuv3-crtc.c
> +++ b/drivers/staging/imx-drm/ipuv3-crtc.c
> @@ -165,8 +165,8 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
> if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> sig_cfg.Vsync_pol = 1;
>
> - sig_cfg.enable_pol = 1;
> - sig_cfg.clk_pol = 0;
> + sig_cfg.enable_pol = ENABLE_POL_HIGH;
> + sig_cfg.clk_pol = CLK_POL_NEGEDGE;
> sig_cfg.width = mode->hdisplay;
> sig_cfg.height = mode->vdisplay;
> sig_cfg.pixel_fmt = out_pixel_fmt;
> diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
> index 3e43e22..8888305 100644
> --- a/include/video/imx-ipu-v3.h
> +++ b/include/video/imx-ipu-v3.h
> @@ -27,6 +27,12 @@ enum ipuv3_type {
>
> #define IPU_PIX_FMT_GBR24 v4l2_fourcc('G', 'B', 'R', '3')
>
> +#define CLK_POL_NEGEDGE 0
> +#define CLK_POL_POSEDGE 1
> +
> +#define ENABLE_POL_LOW 0
> +#define ENABLE_POL_HIGH 1
Adding defines without a proper namespace (IPU_) outside a driver
private header file is not nice. Anyway, instead of adding the
defines ...
> +
> /*
> * Bitfield of Display Interface signal polarities.
> */
> @@ -37,7 +43,7 @@ struct ipu_di_signal_cfg {
> unsigned clksel_en:1;
> unsigned clkidle_en:1;
> unsigned data_pol:1; /* true = inverted */
> - unsigned clk_pol:1; /* true = rising edge */
> + unsigned clk_pol:1;
> unsigned enable_pol:1;
> unsigned Hsync_pol:1; /* true = active high */
> unsigned Vsync_pol:1;
...can we rename the flags to more meaningful names instead?
unsigned clk_pol_rising_edge:1;
unsigned enable_pol_high:1;
unsigned hsync_active_high:1;
unsigned vsync_active_high:1;
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
