Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
---
ChangeLog v13->v14:
- Rebased
ChangeLog 12->v13:
- No changes
ChangeLog 11->v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10:
- New patch which was splitted out from:
"staging: imx-drm: Use de-active and pixelclk-active display-timings.".
- Fixes many issues in "staging: imx-drm: Use de-active and pixelclk-active
display-timings.":
- More clear meaning of the polarity settings.
- The SET_CLK_POL and SET_DE_POL masks are not
needed anymore.
---
drivers/gpu/ipu-v3/ipu-di.c | 4 ++--
drivers/staging/imx-drm/ipuv3-crtc.c | 4 ++--
include/video/imx-ipu-v3.h | 8 +++++++-
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index c490ba4..d00f357 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -595,7 +595,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
}
}
- if (sig->clk_pol)
+ if (sig->clk_pol == CLK_POL_POSEDGE)
di_gen |= DI_GEN_POLARITY_DISP_CLK;
ipu_di_write(di, di_gen, DI_GENERAL);
@@ -606,7 +606,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
reg = ipu_di_read(di, DI_POL);
reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
- if (sig->enable_pol)
+ if (sig->enable_pol == ENABLE_POL_HIGH)
reg |= DI_POL_DRDY_POLARITY_15;
if (sig->data_pol)
reg |= DI_POL_DRDY_DATA_POLARITY;
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index 720868b..7fec438 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -165,8 +165,8 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
sig_cfg.Vsync_pol = 1;
- sig_cfg.enable_pol = 1;
- sig_cfg.clk_pol = 0;
+ sig_cfg.enable_pol = ENABLE_POL_HIGH;
+ sig_cfg.clk_pol = CLK_POL_NEGEDGE;
sig_cfg.width = mode->hdisplay;
sig_cfg.height = mode->vdisplay;
sig_cfg.pixel_fmt = out_pixel_fmt;
diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
index 3e43e22..8888305 100644
--- a/include/video/imx-ipu-v3.h
+++ b/include/video/imx-ipu-v3.h
@@ -27,6 +27,12 @@ enum ipuv3_type {
#define IPU_PIX_FMT_GBR24 v4l2_fourcc('G', 'B', 'R', '3')
+#define CLK_POL_NEGEDGE 0
+#define CLK_POL_POSEDGE 1
+
+#define ENABLE_POL_LOW 0
+#define ENABLE_POL_HIGH 1
+
/*
* Bitfield of Display Interface signal polarities.
*/
@@ -37,7 +43,7 @@ struct ipu_di_signal_cfg {
unsigned clksel_en:1;
unsigned clkidle_en:1;
unsigned data_pol:1; /* true = inverted */
- unsigned clk_pol:1; /* true = rising edge */
+ unsigned clk_pol:1;
unsigned enable_pol:1;
unsigned Hsync_pol:1; /* true = active high */
unsigned Vsync_pol:1;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
