On 03/11/14 13:46, Archit Taneja wrote:
> On Tuesday 11 March 2014 05:51 PM, Hans Verkuil wrote:
>> Hi Archit,
>>
>> A few small comments below...
>>
>> On 03/11/14 09:33, Archit Taneja wrote:
>>> Add selection ioctl ops. For VPE, cropping makes sense only for the input to
>>> VPE(or V4L2_BUF_TYPE_VIDEO_OUTPUT/MPLANE buffers) and composing makes sense
>>> only for the output of VPE(or V4L2_BUF_TYPE_VIDEO_CAPTURE/MPLANE buffers).
>>>
>>> For the CAPTURE type, V4L2_SEL_TGT_COMPOSE results in VPE writing the output
>>> in a rectangle within the capture buffer. For the OUTPUT type, V4L2_SEL_TGT_CROP
>>> results in selecting a rectangle region within the source buffer.
>>>
>>> Setting the crop/compose rectangles should successfully result in
>>> re-configuration of registers which are affected when either source or
>>> destination dimensions change, set_srcdst_params() is called for this purpose.
>>>
>>> Signed-off-by: Archit Taneja <archit@xxxxxx>
>>> ---
>>> drivers/media/platform/ti-vpe/vpe.c | 141 ++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 141 insertions(+)
>>>
>>> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
>>> index ece9b96..4abb85c 100644
>>> --- a/drivers/media/platform/ti-vpe/vpe.c
>>> +++ b/drivers/media/platform/ti-vpe/vpe.c
>>> @@ -410,8 +410,10 @@ static struct vpe_q_data *get_q_data(struct vpe_ctx *ctx,
>>> {
>>> switch (type) {
>>> case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
>>> + case V4L2_BUF_TYPE_VIDEO_OUTPUT:
>>> return &ctx->q_data[Q_DATA_SRC];
>>> case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
>>> + case V4L2_BUF_TYPE_VIDEO_CAPTURE:
>>> return &ctx->q_data[Q_DATA_DST];
>>> default:
>>> BUG();
>>> @@ -1587,6 +1589,142 @@ static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
>>> return set_srcdst_params(ctx);
>>> }
>>>
>>> +static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
>>> +{
>>> + struct vpe_q_data *q_data;
>>> +
>>> + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
>>> + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT))
>>> + return -EINVAL;
>>> +
>>> + q_data = get_q_data(ctx, s->type);
>>> + if (!q_data)
>>> + return -EINVAL;
>>> +
>>> + switch (s->target) {
>>> + case V4L2_SEL_TGT_COMPOSE:
>>> + /*
>>> + * COMPOSE target is only valid for capture buffer type, for
>>> + * output buffer type, assign existing crop parameters to the
>>> + * selection rectangle
>>> + */
>>> + if (s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>> + break;
>>
>> Shouldn't this return -EINVAL?
>
> compose only makes sense for CAPTURE. So, it breaks and performs the calculations after the switch statement.
It's so easy to get confused here.
>
>>
>>> +
>>> + s->r = q_data->c_rect;
>>> + return 0;
>
> The above 2 lines are called for if we try to set compose for OUTPUT. I don't return an error here, just keep the size as the original rect size, and return 0.
>
> I'll replace these 2 lines with 'return -EINVAL;'
Yes, that makes more sense.
>
>>> +
>>> + case V4L2_SEL_TGT_CROP:
>>> + /*
>>> + * CROP target is only valid for output buffer type, for capture
>>> + * buffer type, assign existing compose parameters to the
>>> + * selection rectangle
>>> + */
>>> + if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
>>> + break;
>>
>> Ditto.
>>
>>> +
>>> + s->r = q_data->c_rect;
>>> + return 0;
>>> +
>>> + /*
>>> + * bound and default crop/compose targets are invalid targets to
>>> + * try/set
>>> + */
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (s->r.top < 0 || s->r.left < 0) {
>>> + vpe_err(ctx->dev, "negative values for top and left\n");
>>> + s->r.top = s->r.left = 0;
>>> + }
>>> +
>>> + v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1,
>>> + &s->r.height, MIN_H, q_data->height, H_ALIGN, S_ALIGN);
>>> +
>>> + /* adjust left/top if cropping rectangle is out of bounds */
>>> + if (s->r.left + s->r.width > q_data->width)
>>> + s->r.left = q_data->width - s->r.width;
>>> + if (s->r.top + s->r.height > q_data->height)
>>> + s->r.top = q_data->height - s->r.height;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int vpe_g_selection(struct file *file, void *fh,
>>> + struct v4l2_selection *s)
>>> +{
>>> + struct vpe_ctx *ctx = file2ctx(file);
>>> + struct vpe_q_data *q_data;
>>> +
>>> + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
>>> + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT))
>>> + return -EINVAL;
>>> +
>>> + q_data = get_q_data(ctx, s->type);
>>> + if (!q_data)
>>> + return -EINVAL;
>>> +
>>> + switch (s->target) {
>>> + /* return width and height from S_FMT of the respective buffer type */
>>> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>>> + s->r.left = 0;
>>> + s->r.top = 0;
>>> + s->r.width = q_data->width;
>>> + s->r.height = q_data->height;
>>
>> The crop targets only make sense for type OUTPUT and the compose only for
>> type CAPTURE. Add some checks for that.
>
> I return the image size for G_FMT irrespective of what combination of
> crop/compose CAPTURE/OUTPUT it is. I suppose it is better to return
> an error if the user tries to configure a wrong combination.
Yes. If for no other reason that I plan on adding crop/compose/scaling support
to v4l2-compliance soon, and this will probably be one of the tests.
>
> Thanks,
> Archit
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
