On Tuesday 11 March 2014 05:51 PM, Hans Verkuil wrote:
Hi Archit,
A few small comments below...
On 03/11/14 09:33, Archit Taneja wrote:
Add selection ioctl ops. For VPE, cropping makes sense only for the input to
VPE(or V4L2_BUF_TYPE_VIDEO_OUTPUT/MPLANE buffers) and composing makes sense
only for the output of VPE(or V4L2_BUF_TYPE_VIDEO_CAPTURE/MPLANE buffers).
For the CAPTURE type, V4L2_SEL_TGT_COMPOSE results in VPE writing the output
in a rectangle within the capture buffer. For the OUTPUT type, V4L2_SEL_TGT_CROP
results in selecting a rectangle region within the source buffer.
Setting the crop/compose rectangles should successfully result in
re-configuration of registers which are affected when either source or
destination dimensions change, set_srcdst_params() is called for this purpose.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/media/platform/ti-vpe/vpe.c | 141 ++++++++++++++++++++++++++++++++++++
1 file changed, 141 insertions(+)
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index ece9b96..4abb85c 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -410,8 +410,10 @@ static struct vpe_q_data *get_q_data(struct vpe_ctx *ctx,
{
switch (type) {
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+ case V4L2_BUF_TYPE_VIDEO_OUTPUT:
return &ctx->q_data[Q_DATA_SRC];
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
return &ctx->q_data[Q_DATA_DST];
default:
BUG();
@@ -1587,6 +1589,142 @@ static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
return set_srcdst_params(ctx);
}
+static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s)
+{
+ struct vpe_q_data *q_data;
+
+ if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+ (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT))
+ return -EINVAL;
+
+ q_data = get_q_data(ctx, s->type);
+ if (!q_data)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ /*
+ * COMPOSE target is only valid for capture buffer type, for
+ * output buffer type, assign existing crop parameters to the
+ * selection rectangle
+ */
+ if (s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ break;
Shouldn't this return -EINVAL?
compose only makes sense for CAPTURE. So, it breaks and performs the
calculations after the switch statement.
+
+ s->r = q_data->c_rect;
+ return 0;
The above 2 lines are called for if we try to set compose for OUTPUT. I
don't return an error here, just keep the size as the original rect
size, and return 0.
I'll replace these 2 lines with 'return -EINVAL;'
+
+ case V4L2_SEL_TGT_CROP:
+ /*
+ * CROP target is only valid for output buffer type, for capture
+ * buffer type, assign existing compose parameters to the
+ * selection rectangle
+ */
+ if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+ break;
Ditto.
+
+ s->r = q_data->c_rect;
+ return 0;
+
+ /*
+ * bound and default crop/compose targets are invalid targets to
+ * try/set
+ */
+ default:
+ return -EINVAL;
+ }
+
+ if (s->r.top < 0 || s->r.left < 0) {
+ vpe_err(ctx->dev, "negative values for top and left\n");
+ s->r.top = s->r.left = 0;
+ }
+
+ v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1,
+ &s->r.height, MIN_H, q_data->height, H_ALIGN, S_ALIGN);
+
+ /* adjust left/top if cropping rectangle is out of bounds */
+ if (s->r.left + s->r.width > q_data->width)
+ s->r.left = q_data->width - s->r.width;
+ if (s->r.top + s->r.height > q_data->height)
+ s->r.top = q_data->height - s->r.height;
+
+ return 0;
+}
+
+static int vpe_g_selection(struct file *file, void *fh,
+ struct v4l2_selection *s)
+{
+ struct vpe_ctx *ctx = file2ctx(file);
+ struct vpe_q_data *q_data;
+
+ if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+ (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT))
+ return -EINVAL;
+
+ q_data = get_q_data(ctx, s->type);
+ if (!q_data)
+ return -EINVAL;
+
+ switch (s->target) {
+ /* return width and height from S_FMT of the respective buffer type */
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ s->r.left = 0;
+ s->r.top = 0;
+ s->r.width = q_data->width;
+ s->r.height = q_data->height;
The crop targets only make sense for type OUTPUT and the compose only for
type CAPTURE. Add some checks for that.
I return the image size for G_FMT irrespective of what combination of
crop/compose CAPTURE/OUTPUT it is. I suppose it is better to return an
error if the user tries to configure a wrong combination.
Thanks,
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
