On 03/11/14 10:33, Laurent Pinchart wrote:
> Hi Hans,
>
> On Tuesday 11 March 2014 00:32:48 Hans Verkuil wrote:
>> On 03/11/2014 12:23 AM, Guennadi Liakhovetski wrote:
>>> Hi Hans,
>>>
>>> Thanks for taking care about this problem. I'm not sure it would be ok for
>>> me to pull this specific patch via my tree, because it's for the V4L2
>>> core, and the other 2 patches in this series depend on this one.
>>
>> It's OK by me to pull this through your tree.
>>
>>> But anyway I've got a question to this patch:
>>>
>>> On Mon, 17 Feb 2014, Hans Verkuil wrote:
>>>> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>>>>
>>>> While there was already a g_tvnorms_output video op, it's counterpart for
>>>> video capture was missing. Add it.
>>>>
>>>> This is necessary for generic bridge drivers like soc-camera to set the
>>>> video_device tvnorms field correctly. Otherwise ENUMSTD cannot work.
>>>>
>>>> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>>>> ---
>>>>
>>>> include/media/v4l2-subdev.h | 8 ++++++--
>>>> 1 file changed, 6 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
>>>> index d67210a..787d078 100644
>>>> --- a/include/media/v4l2-subdev.h
>>>> +++ b/include/media/v4l2-subdev.h
>>>> @@ -264,8 +264,11 @@ struct v4l2_mbus_frame_desc {
>>>>
>>>> g_std_output: get current standard for video OUTPUT devices. This is
>>>> ignored by video input devices.
>>>>
>>>> - g_tvnorms_output: get v4l2_std_id with all standards supported by
>>>> video
>>>> - OUTPUT device. This is ignored by video input devices.
>>>> + g_tvnorms: get v4l2_std_id with all standards supported by the video
>>>> + CAPTURE device. This is ignored by video output devices.
>>>> +
>>>> + g_tvnorms_output: get v4l2_std_id with all standards supported by the
>>>> video + OUTPUT device. This is ignored by video capture devices.
>>>
>>> Why do we need two separate operations with the same functionality - one
>>> for capture and one for output? Can we have subdevices, that need to
>>>
>>> implement both? Besides, what about these two core ops:
>>> int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
>>> int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
>>>
>>> ? Seems like a slightly different approach is needed? Or am I missing
>>> anything?
>>
>> There are drivers (ivtv) that have both capture and output subdevices. Each
>> can have its own standard. Such drivers use v4l2_device_call_all() to call
>> the same op for all subdevs so any subdev that can handle that op gets
>> called. So they use it to call the s_std op to change the capture standard
>> and they call s_std_output to change the output standard.
>>
>> If you can't tell the difference between capture tvnorms and output tvnorms
>> this becomes tricky to handle. Just keep the two separate and there is no
>> confusion.
>>
>> Note that the video ops have the g/s_std_output ops. It's due to historical
>> reasons that g/s_std ended up in the core ops. They probably should be moved
>> to the video ops, but it's just not worth the effort.
>
> It's not such a big effort, I can easily cook up a patch. However, it looks
> like the s_std operation is implemented by the following subdev drivers that
> don't implement video ops:
>
> tuner-core
> tvaudio
> sony-btf-mpx
> vp27smpx
> cx18-gpio
>
> It probably doesn't make much sense to add video ops to all of those.
Well, if you move it to the video ops, then you have to. This was one of the
reasons I decided at the time to keep g/s_std in core since they are used by
drivers that otherwise do not need video ops. But in hindsight I always thought
is was a mistake and I was just a bit too lazy.
I really don't think it's worth the effort to change it all, but I won't
hold you back either :-)
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
