Re: [patch v2] [media] stv090x: remove indent levels in stv090x_get_coldlock()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 21.02.2014 09:50, schrieb Dan Carpenter:
> This code is needlessly complicated and checkpatch.pl complains that we
> go over the 80 characters per line limit.
> 
> If we flip the "if (!lock) {" test to "if (lock) return;" then we can
> remove an indent level from the rest of the function.
> 
> We can add two returns in the "if (state->srate >= 10000000) {"
> condition and move the else statement back an additional indent level.
> 
> There is another "if (!lock) {" check which can be removed since we have
> already checked "lock" and know it is zero at this point.  This second
> check on "lock" is also a problem because it sets off a static checker
> warning.  I have reviewed this code for some time to see if something
> else was intended, but have concluded that it was simply an oversight
> and should be removed.  Removing this duplicative check gains us an
> third indent level.
> 
> Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
> ---
> v2: add the returns in the "if (state->srate >= 10000000) {" condition.
> 
> diff --git a/drivers/media/dvb-frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c
> index 23e872f84742..93f4979ea6e9 100644
> --- a/drivers/media/dvb-frontends/stv090x.c
> +++ b/drivers/media/dvb-frontends/stv090x.c
> @@ -2146,7 +2146,7 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
>  
>  	u32 reg;
>  	s32 car_step, steps, cur_step, dir, freq, timeout_lock;
> -	int lock = 0;
> +	int lock;
>  
>  	if (state->srate >= 10000000)
>  		timeout_lock = timeout_dmd / 3;
> @@ -2154,98 +2154,96 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
>  		timeout_lock = timeout_dmd / 2;
>  
>  	lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */
> -	if (!lock) {
> -		if (state->srate >= 10000000) {
> -			if (stv090x_chk_tmg(state)) {
> -				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> -					goto err;
> -				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> -					goto err;
> -				lock = stv090x_get_dmdlock(state, timeout_dmd);
> -			} else {
> -				lock = 0;
> -			}
> -		} else {
> -			if      (state->srate <=  4000000)
> -				car_step = 1000;
> -			else if (state->srate <=  7000000)
> -				car_step = 2000;
> -			else if (state->srate <= 10000000)
> -				car_step = 3000;
> -			else
> -				car_step = 5000;
> -
> -			steps  = (state->search_range / 1000) / car_step;
> -			steps /= 2;
> -			steps  = 2 * (steps + 1);
> -			if (steps < 0)
> -				steps = 2;
> -			else if (steps > 12)
> -				steps = 12;
> -
> -			cur_step = 1;
> -			dir = 1;
> -
> -			if (!lock) {
> -				freq = state->frequency;
> -				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
> -				while ((cur_step <= steps) && (!lock)) {
> -					if (dir > 0)
> -						freq += cur_step * car_step;
> -					else
> -						freq -= cur_step * car_step;
> -
> -					/* Setup tuner */
> -					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> -						goto err;
> +	if (lock)
> +		return lock;
>  
> -					if (state->config->tuner_set_frequency) {
> -						if (state->config->tuner_set_frequency(fe, freq) < 0)
> -							goto err_gateoff;
> -					}
> +	if (state->srate >= 10000000) {
> +		if (stv090x_chk_tmg(state)) {
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> +				goto err;
> +			return stv090x_get_dmdlock(state, timeout_dmd);
> +		}
> +		return 0;
> +	}
>  
> -					if (state->config->tuner_set_bandwidth) {
> -						if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
> -							goto err_gateoff;
> -					}
> +	if (state->srate <= 4000000)
> +		car_step = 1000;
> +	else if (state->srate <= 7000000)
> +		car_step = 2000;
> +	else if (state->srate <= 10000000)
> +		car_step = 3000;
> +	else
> +		car_step = 5000;


hi dan, just a hint
when you encounter large numbers like this: please format it in a way
that it is easy to to see if a number is missing like:

        car_step = 5000;
	if      (state->srate <=  4000000)  car_step = 1000;
	else if (state->srate <=  7000000)  car_step = 2000;
	else    (state->srate <= 10000000)  car_step = 3000;


an other hint from the department of silly steps: do not add 0 in front
or you will searching for the bug a long time :)


just my 2 cents,

re,
 wh




>  
> -					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> -						goto err;
> +	steps  = (state->search_range / 1000) / car_step;
> +	steps /= 2;
> +	steps  = 2 * (steps + 1);
> +	if (steps < 0)
> +		steps = 2;
> +	else if (steps > 12)
> +		steps = 12;
>  
> -					msleep(50);
> +	cur_step = 1;
> +	dir = 1;
>  
> -					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> -						goto err;
> +	freq = state->frequency;
> +	state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
> +	while ((cur_step <= steps) && (!lock)) {
> +		if (dir > 0)
> +			freq += cur_step * car_step;
> +		else
> +			freq -= cur_step * car_step;
>  
> -					if (state->config->tuner_get_status) {
> -						if (state->config->tuner_get_status(fe, &reg) < 0)
> -							goto err_gateoff;
> -					}
> +		/* Setup tuner */
> +		if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> +			goto err;
>  
> -					if (reg)
> -						dprintk(FE_DEBUG, 1, "Tuner phase locked");
> -					else
> -						dprintk(FE_DEBUG, 1, "Tuner unlocked");
> +		if (state->config->tuner_set_frequency) {
> +			if (state->config->tuner_set_frequency(fe, freq) < 0)
> +				goto err_gateoff;
> +		}
>  
> -					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> -						goto err;
> +		if (state->config->tuner_set_bandwidth) {
> +			if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
> +				goto err_gateoff;
> +		}
>  
> -					STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
> -					if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> -						goto err;
> -					lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
> +		if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> +			goto err;
>  
> -					dir *= -1;
> -					cur_step++;
> -				}
> -			}
> +		msleep(50);
> +
> +		if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> +			goto err;
> +
> +		if (state->config->tuner_get_status) {
> +			if (state->config->tuner_get_status(fe, &reg) < 0)
> +				goto err_gateoff;
>  		}
> +
> +		if (reg)
> +			dprintk(FE_DEBUG, 1, "Tuner phase locked");
> +		else
> +			dprintk(FE_DEBUG, 1, "Tuner unlocked");
> +
> +		if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> +			goto err;
> +
> +		STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
> +		if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
> +			goto err;
> +		if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
> +			goto err;
> +		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> +			goto err;
> +		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> +			goto err;
> +		lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
> +
> +		dir *= -1;
> +		cur_step++;
>  	}
>  
>  	return lock;
> --
> To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux