Re: [PATCH 2/6] seqno-fence: Hardware dma-buf implementation of fencing (v4)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 17, 2014 at 12:36 PM, Christian König
<deathsimple@xxxxxxxxxxx> wrote:
> Am 17.02.2014 18:27, schrieb Rob Clark:
>
>> On Mon, Feb 17, 2014 at 11:56 AM, Christian König
>> <deathsimple@xxxxxxxxxxx> wrote:
>>>
>>> Am 17.02.2014 16:56, schrieb Maarten Lankhorst:
>>>
>>>> This type of fence can be used with hardware synchronization for simple
>>>> hardware that can block execution until the condition
>>>> (dma_buf[offset] - value) >= 0 has been met.
>>>
>>>
>>> Can't we make that just "dma_buf[offset] != 0" instead? As far as I know
>>> this way it would match the definition M$ uses in their WDDM
>>> specification
>>> and so make it much more likely that hardware supports it.
>>
>> well 'buf[offset] >= value' at least means the same slot can be used
>> for multiple operations (with increasing values of 'value').. not sure
>> if that is something people care about.
>>
>>> =value seems to be possible with adreno and radeon.  I'm not really sure
>>> about others (although I presume it as least supported for nv desktop
>>> stuff).  For hw that cannot do >=value, we can either have a different fence
>>> implementation which uses the !=0 approach.  Or change seqno-fence
>>> implementation later if needed.  But if someone has hw that can do !=0 but
>>> not >=value, speak up now ;-)
>
>
> Here! Radeon can only do >=value on the DMA and 3D engine, but not with UVD
> or VCE. And for the 3D engine it means draining the pipe, which isn't really
> a good idea.

hmm, ok.. forgot you have a few extra rings compared to me.  Is UVD
re-ordering from decode-order to display-order for you in hw?  If not,
I guess you need sw intervention anyways when a frame is done for
frame re-ordering, so maybe hw->hw sync doesn't really matter as much
as compared to gpu/3d->display.  For dma<->3d interactions, seems like
you would care more about hw<->hw sync, but I guess you aren't likely
to use GPU A to do a resolve blit for GPU B..

For 3D ring, I assume you probably want a CP_WAIT_FOR_IDLE before a
CP_MEM_WRITE to update fence value in memory (for the one signalling
the fence).  But why would you need that before a CP_WAIT_REG_MEM (for
the one waiting for the fence)?  I don't exactly have documentation
for adreno version of CP_WAIT_REG_{MEM,EQ,GTE}..  but PFP and ME
appear to be same instruction set as r600, so I'm pretty sure they
should have similar capabilities.. CP_WAIT_REG_MEM appears to be same
but with 32bit gpu addresses vs 64b.

BR,
-R

> Christian.
>
>
>>
>>> Apart from that I still don't like the idea of leaking a drivers IRQ
>>> context
>>> outside of the driver, but without a proper GPU scheduler there probably
>>> isn't much alternative.
>>
>> I guess it will be not uncommon scenario for gpu device to just need
>> to kick display device to write a few registers for a page flip..
>> probably best not to schedule a worker just for this (unless the
>> signalled device otherwise needs to).  I think it is better in this
>> case to give the signalee some rope to hang themselves, and make it
>> the responsibility of the callback to kick things off to a worker if
>> needed.
>>
>> BR,
>> -R
>>
>>> Christian.
>>>
>>>> A software fallback still has to be provided in case the fence is used
>>>> with a device that doesn't support this mechanism. It is useful to
>>>> expose
>>>> this for graphics cards that have an op to support this.
>>>>
>>>> Some cards like i915 can export those, but don't have an option to wait,
>>>> so they need the software fallback.
>>>>
>>>> I extended the original patch by Rob Clark.
>>>>
>>>> v1: Original
>>>> v2: Renamed from bikeshed to seqno, moved into dma-fence.c since
>>>>       not much was left of the file. Lots of documentation added.
>>>> v3: Use fence_ops instead of custom callbacks. Moved to own file
>>>>       to avoid circular dependency between dma-buf.h and fence.h
>>>> v4: Add spinlock pointer to seqno_fence_init
>>>>
>>>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxx>
>>>> ---
>>>>    Documentation/DocBook/device-drivers.tmpl |    1
>>>>    drivers/base/fence.c                      |   50 +++++++++++++
>>>>    include/linux/seqno-fence.h               |  109
>>>> +++++++++++++++++++++++++++++
>>>>    3 files changed, 160 insertions(+)
>>>>    create mode 100644 include/linux/seqno-fence.h
>>>>
>>>> diff --git a/Documentation/DocBook/device-drivers.tmpl
>>>> b/Documentation/DocBook/device-drivers.tmpl
>>>> index 7a0c9ddb4818..8c85c20942c2 100644
>>>> --- a/Documentation/DocBook/device-drivers.tmpl
>>>> +++ b/Documentation/DocBook/device-drivers.tmpl
>>>> @@ -131,6 +131,7 @@ X!Edrivers/base/interface.c
>>>>    !Edrivers/base/dma-buf.c
>>>>    !Edrivers/base/fence.c
>>>>    !Iinclude/linux/fence.h
>>>> +!Iinclude/linux/seqno-fence.h
>>>>    !Edrivers/base/reservation.c
>>>>    !Iinclude/linux/reservation.h
>>>>    !Edrivers/base/dma-coherent.c
>>>> diff --git a/drivers/base/fence.c b/drivers/base/fence.c
>>>> index 12df2bf62034..cd0937127a89 100644
>>>> --- a/drivers/base/fence.c
>>>> +++ b/drivers/base/fence.c
>>>> @@ -25,6 +25,7 @@
>>>>    #include <linux/export.h>
>>>>    #include <linux/atomic.h>
>>>>    #include <linux/fence.h>
>>>> +#include <linux/seqno-fence.h>
>>>>      #define CREATE_TRACE_POINTS
>>>>    #include <trace/events/fence.h>
>>>> @@ -413,3 +414,52 @@ __fence_init(struct fence *fence, const struct
>>>> fence_ops *ops,
>>>>          trace_fence_init(fence);
>>>>    }
>>>>    EXPORT_SYMBOL(__fence_init);
>>>> +
>>>> +static const char *seqno_fence_get_driver_name(struct fence *fence) {
>>>> +       struct seqno_fence *seqno_fence = to_seqno_fence(fence);
>>>> +       return seqno_fence->ops->get_driver_name(fence);
>>>> +}
>>>> +
>>>> +static const char *seqno_fence_get_timeline_name(struct fence *fence) {
>>>> +       struct seqno_fence *seqno_fence = to_seqno_fence(fence);
>>>> +       return seqno_fence->ops->get_timeline_name(fence);
>>>> +}
>>>> +
>>>> +static bool seqno_enable_signaling(struct fence *fence)
>>>> +{
>>>> +       struct seqno_fence *seqno_fence = to_seqno_fence(fence);
>>>> +       return seqno_fence->ops->enable_signaling(fence);
>>>> +}
>>>> +
>>>> +static bool seqno_signaled(struct fence *fence)
>>>> +{
>>>> +       struct seqno_fence *seqno_fence = to_seqno_fence(fence);
>>>> +       return seqno_fence->ops->signaled &&
>>>> seqno_fence->ops->signaled(fence);
>>>> +}
>>>> +
>>>> +static void seqno_release(struct fence *fence)
>>>> +{
>>>> +       struct seqno_fence *f = to_seqno_fence(fence);
>>>> +
>>>> +       dma_buf_put(f->sync_buf);
>>>> +       if (f->ops->release)
>>>> +               f->ops->release(fence);
>>>> +       else
>>>> +               kfree(f);
>>>> +}
>>>> +
>>>> +static long seqno_wait(struct fence *fence, bool intr, signed long
>>>> timeout)
>>>> +{
>>>> +       struct seqno_fence *f = to_seqno_fence(fence);
>>>> +       return f->ops->wait(fence, intr, timeout);
>>>> +}
>>>> +
>>>> +const struct fence_ops seqno_fence_ops = {
>>>> +       .get_driver_name = seqno_fence_get_driver_name,
>>>> +       .get_timeline_name = seqno_fence_get_timeline_name,
>>>> +       .enable_signaling = seqno_enable_signaling,
>>>> +       .signaled = seqno_signaled,
>>>> +       .wait = seqno_wait,
>>>> +       .release = seqno_release,
>>>> +};
>>>> +EXPORT_SYMBOL(seqno_fence_ops);
>>>> diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h
>>>> new file mode 100644
>>>> index 000000000000..952f7909128c
>>>> --- /dev/null
>>>> +++ b/include/linux/seqno-fence.h
>>>> @@ -0,0 +1,109 @@
>>>> +/*
>>>> + * seqno-fence, using a dma-buf to synchronize fencing
>>>> + *
>>>> + * Copyright (C) 2012 Texas Instruments
>>>> + * Copyright (C) 2012 Canonical Ltd
>>>> + * Authors:
>>>> + * Rob Clark <robdclark@xxxxxxxxx>
>>>> + *   Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxx>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> it
>>>> + * under the terms of the GNU General Public License version 2 as
>>>> published by
>>>> + * the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful, but
>>>> WITHOUT
>>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
>>>> or
>>>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
>>>> License
>>>> for
>>>> + * more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License
>>>> along with
>>>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +#ifndef __LINUX_SEQNO_FENCE_H
>>>> +#define __LINUX_SEQNO_FENCE_H
>>>> +
>>>> +#include <linux/fence.h>
>>>> +#include <linux/dma-buf.h>
>>>> +
>>>> +struct seqno_fence {
>>>> +       struct fence base;
>>>> +
>>>> +       const struct fence_ops *ops;
>>>> +       struct dma_buf *sync_buf;
>>>> +       uint32_t seqno_ofs;
>>>> +};
>>>> +
>>>> +extern const struct fence_ops seqno_fence_ops;
>>>> +
>>>> +/**
>>>> + * to_seqno_fence - cast a fence to a seqno_fence
>>>> + * @fence: fence to cast to a seqno_fence
>>>> + *
>>>> + * Returns NULL if the fence is not a seqno_fence,
>>>> + * or the seqno_fence otherwise.
>>>> + */
>>>> +static inline struct seqno_fence *
>>>> +to_seqno_fence(struct fence *fence)
>>>> +{
>>>> +       if (fence->ops != &seqno_fence_ops)
>>>> +               return NULL;
>>>> +       return container_of(fence, struct seqno_fence, base);
>>>> +}
>>>> +
>>>> +/**
>>>> + * seqno_fence_init - initialize a seqno fence
>>>> + * @fence: seqno_fence to initialize
>>>> + * @lock: pointer to spinlock to use for fence
>>>> + * @sync_buf: buffer containing the memory location to signal on
>>>> + * @context: the execution context this fence is a part of
>>>> + * @seqno_ofs: the offset within @sync_buf
>>>> + * @seqno: the sequence # to signal on
>>>> + * @ops: the fence_ops for operations on this seqno fence
>>>> + *
>>>> + * This function initializes a struct seqno_fence with passed
>>>> parameters,
>>>> + * and takes a reference on sync_buf which is released on fence
>>>> destruction.
>>>> + *
>>>> + * A seqno_fence is a dma_fence which can complete in software when
>>>> + * enable_signaling is called, but it also completes when
>>>> + * (s32)((sync_buf)[seqno_ofs] - seqno) >= 0 is true
>>>> + *
>>>> + * The seqno_fence will take a refcount on the sync_buf until it's
>>>> + * destroyed, but actual lifetime of sync_buf may be longer if one of
>>>> the
>>>> + * callers take a reference to it.
>>>> + *
>>>> + * Certain hardware have instructions to insert this type of wait
>>>> condition
>>>> + * in the command stream, so no intervention from software would be
>>>> needed.
>>>> + * This type of fence can be destroyed before completed, however a
>>>> reference
>>>> + * on the sync_buf dma-buf can be taken. It is encouraged to re-use the
>>>> same
>>>> + * dma-buf for sync_buf, since mapping or unmapping the sync_buf to the
>>>> + * device's vm can be expensive.
>>>> + *
>>>> + * It is recommended for creators of seqno_fence to call fence_signal
>>>> + * before destruction. This will prevent possible issues from
>>>> wraparound
>>>> at
>>>> + * time of issue vs time of check, since users can check
>>>> fence_is_signaled
>>>> + * before submitting instructions for the hardware to wait on the
>>>> fence.
>>>> + * However, when ops.enable_signaling is not called, it doesn't have to
>>>> be
>>>> + * done as soon as possible, just before there's any real danger of
>>>> seqno
>>>> + * wraparound.
>>>> + */
>>>> +static inline void
>>>> +seqno_fence_init(struct seqno_fence *fence, spinlock_t *lock,
>>>> +                struct dma_buf *sync_buf,  uint32_t context, uint32_t
>>>> seqno_ofs,
>>>> +                uint32_t seqno, const struct fence_ops *ops)
>>>> +{
>>>> +       BUG_ON(!fence || !sync_buf || !ops);
>>>> +       BUG_ON(!ops->wait || !ops->enable_signaling ||
>>>> !ops->get_driver_name || !ops->get_timeline_name);
>>>> +
>>>> +       /*
>>>> +        * ops is used in __fence_init for get_driver_name, so needs to
>>>> be
>>>> +        * initialized first
>>>> +        */
>>>> +       fence->ops = ops;
>>>> +       __fence_init(&fence->base, &seqno_fence_ops, lock, context,
>>>> seqno);
>>>> +       get_dma_buf(sync_buf);
>>>> +       fence->sync_buf = sync_buf;
>>>> +       fence->seqno_ofs = seqno_ofs;
>>>> +}
>>>> +
>>>> +#endif /* __LINUX_SEQNO_FENCE_H */
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>>>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>>>
>>>
>>> _______________________________________________
>>> dri-devel mailing list
>>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux