On 20 Jan 2014, at 10:55 PM, Andy Walls <awalls@xxxxxxxxxxxxxxxx> wrote: > Robert Longbottom <rongblor@xxxxxxxxxxxxxx> wrote: >> >> Hi, >> >> I've just bought one of these cards which is based on the Conexant >> Fusion 878A chip thinking it would just work under Linux being >> bttv-based. Unfortunately (for me) it's not and it is just picked up >> as >> a generic unknown card by the bttv driver. >> >> Does anyone have one of these that is working, or have any pointers to >> what I can try to make it work? I've had a go manually specifying >> card= >> as a module option for a couple of the existing cards that also use the >> Conexant Fusion chip but neither work (BTTV_BOARD_PICOLO_TETRA_CHIP and >> BTTV_BOARD_GEOVISION_GV800S). >> >> When I start up xawtv and switch to framegrabber mode I just get lots >> of >> errors in /var/log/messages saying: >> >> Jan 20 21:09:13 quad kernel: [ 2732.616016] bttv: 0: timeout: drop=0 >> irq=2998/35891, risc=339d5000, bits: HSYNC >> Jan 20 21:09:13 quad kernel: [ 2733.122014] bttv: 0: timeout: drop=0 >> irq=3028/35952, risc=339d5000, bits: HSYNC >> Jan 20 21:09:14 quad kernel: [ 2733.625018] bttv: 0: timeout: drop=0 >> irq=3058/36015, risc=339d5000, bits: HSYNC >> Jan 20 21:09:14 quad kernel: [ 2734.127014] bttv: 0: timeout: drop=0 >> irq=3088/36077, risc=339d5000, bits: HSYNC >> Jan 20 21:09:15 quad kernel: [ 2734.628014] bttv: 0: timeout: drop=0 >> irq=3118/36140, risc=339d5000, bits: HSYNC >> >> Any help appreciated. More info about the card below. >> Thanks, >> Rob. >> >> Chips on card: >> >> 4x Conexant Fusion 878A >> 1x PCI6140-AA33PC >> 1x SMD IC with no markings at all >> Couple of 74HCTnnn chips >> 1x Atmel 520 >> 1x 35.46895M Crystal >> >> Result of modprobe bttv: >> >> Jan 20 20:07:07 quad kernel: [ 8490.076924] bttv: driver version 0.9.19 >> loaded >> Jan 20 20:07:07 quad kernel: [ 8490.076930] bttv: using 8 buffers with >> 2080k (520 pages) each for capture >> Jan 20 20:07:07 quad kernel: [ 8490.076983] bttv: Bt8xx card found (0) >> Jan 20 20:07:07 quad kernel: [ 8490.077001] bttv: 0: Bt878 (rev 17) at >> 0000:02:0c.0, irq: 16, latency: 32, mmio: 0xd5000000 >> Jan 20 20:07:07 quad kernel: [ 8490.077033] bttv: 0: using: *** >> UNKNOWN/GENERIC *** [card=0,autodetected] >> Jan 20 20:07:07 quad kernel: [ 8490.109816] bttv: 0: tuner type unset >> Jan 20 20:07:07 quad kernel: [ 8490.110099] bttv: 0: registered device >> video0 >> Jan 20 20:07:07 quad kernel: [ 8490.110485] bttv: 0: registered device >> vbi0 >> Jan 20 20:07:07 quad kernel: [ 8490.114206] bttv: Bt8xx card found (1) >> Jan 20 20:07:07 quad kernel: [ 8490.114228] bttv: 1: Bt878 (rev 17) at >> 0000:02:0d.0, irq: 17, latency: 32, mmio: 0xd5002000 >> Jan 20 20:07:07 quad kernel: [ 8490.114279] bttv: 1: using: *** >> UNKNOWN/GENERIC *** [card=0,autodetected] >> Jan 20 20:07:07 quad kernel: [ 8490.116288] tveeprom 5-0050: Huh, no >> eeprom present (err=-6)? >> Jan 20 20:07:07 quad kernel: [ 8490.116296] bttv: 1: tuner type unset >> Jan 20 20:07:07 quad kernel: [ 8490.116393] bttv: 1: registered device >> video1 >> Jan 20 20:07:07 quad kernel: [ 8490.116589] bttv: 1: registered device >> vbi1 >> Jan 20 20:07:07 quad kernel: [ 8490.120104] bttv: Bt8xx card found (2) >> Jan 20 20:07:07 quad kernel: [ 8490.120135] bttv: 2: Bt878 (rev 17) at >> 0000:02:0e.0, irq: 18, latency: 32, mmio: 0xd5004000 >> Jan 20 20:07:07 quad kernel: [ 8490.120165] bttv: 2: using: *** >> UNKNOWN/GENERIC *** [card=0,autodetected] >> Jan 20 20:07:07 quad kernel: [ 8490.121031] tveeprom 6-0050: Huh, no >> eeprom present (err=-6)? >> Jan 20 20:07:07 quad kernel: [ 8490.121035] bttv: 2: tuner type unset >> Jan 20 20:07:07 quad kernel: [ 8490.121090] bttv: 2: registered device >> video2 >> Jan 20 20:07:07 quad kernel: [ 8490.121226] bttv: 2: registered device >> vbi2 >> Jan 20 20:07:07 quad kernel: [ 8490.124682] bttv: Bt8xx card found (3) >> Jan 20 20:07:07 quad kernel: [ 8490.124714] bttv: 3: Bt878 (rev 17) at >> 0000:02:0f.0, irq: 19, latency: 32, mmio: 0xd5006000 >> Jan 20 20:07:07 quad kernel: [ 8490.124744] bttv: 3: using: *** >> UNKNOWN/GENERIC *** [card=0,autodetected] >> Jan 20 20:07:07 quad kernel: [ 8490.125739] tveeprom 7-0050: Huh, no >> eeprom present (err=-6)? >> Jan 20 20:07:07 quad kernel: [ 8490.125745] bttv: 3: tuner type unset >> Jan 20 20:07:07 quad kernel: [ 8490.125842] bttv: 3: registered device >> video3 >> Jan 20 20:07:07 quad kernel: [ 8490.126063] bttv: 3: registered device >> vbi3 >> Jan 20 20:07:07 quad kernel: [ 8490.130127] bttv: Bt8xx card found (4) >> Jan 20 20:07:07 quad kernel: [ 8490.130151] bttv: 4: Bt878 (rev 17) at >> 0000:03:04.0, irq: 17, latency: 32, mmio: 0xd5100000 >> Jan 20 20:07:07 quad kernel: [ 8490.130182] bttv: 4: detected: IVC-200 >> [card=102], PCI subsystem ID is 0000:a155 >> Jan 20 20:07:07 quad kernel: [ 8490.130186] bttv: 4: using: IVC-200 >> [card=102,autodetected] >> Jan 20 20:07:07 quad kernel: [ 8490.130283] bttv: 4: tuner absent >> Jan 20 20:07:07 quad kernel: [ 8490.130473] bttv: 4: registered device >> video4 >> Jan 20 20:07:07 quad kernel: [ 8490.130512] bttv: 4: registered device >> vbi4 >> Jan 20 20:07:07 quad kernel: [ 8490.130534] bttv: 4: Setting PLL: >> 28636363 => 35468950 (needs up to 100ms) >> Jan 20 20:07:07 quad kernel: [ 8490.136550] bttv: 4: Setting PLL: >> 28636363 => 35468950 (needs up to 100ms) >> Jan 20 20:07:07 quad kernel: [ 8490.139121] bttv: 4: Setting PLL: >> 28636363 => 35468950 (needs up to 100ms) >> Jan 20 20:07:07 quad kernel: [ 8490.141017] bttv: PLL set ok >> >> result of lspci; I have another 4 input bttv based capture card >> installed in this machine that works (an IVC-200G), hence 8 bt878 >> chips: >> >> 00:00.0 Host bridge: NVIDIA Corporation MCP73 Host Bridge (rev a2) >> 00:00.1 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a2) >> 00:01.0 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:01.1 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:01.2 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:01.3 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:01.4 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:01.5 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:01.6 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:02.0 RAM memory: NVIDIA Corporation nForce 630i memory controller >> (rev a1) >> 00:03.0 ISA bridge: NVIDIA Corporation MCP73 LPC Bridge (rev a2) >> 00:03.1 SMBus: NVIDIA Corporation MCP73 SMBus (rev a1) >> 00:03.2 RAM memory: NVIDIA Corporation MCP73 Memory Controller (rev a1) >> 00:03.4 RAM memory: NVIDIA Corporation MCP73 Memory Controller (rev a1) >> 00:04.0 USB controller: NVIDIA Corporation GeForce 7100/nForce 630i USB >> (rev a1) >> 00:04.1 USB controller: NVIDIA Corporation MCP73 [nForce 630i] USB 2.0 >> Controller (EHCI) (rev a1) >> 00:08.0 IDE interface: NVIDIA Corporation MCP73 IDE (rev a1) >> 00:09.0 Audio device: NVIDIA Corporation MCP73 High Definition Audio >> (rev a1) >> 00:0a.0 PCI bridge: NVIDIA Corporation MCP73 PCI Express bridge (rev >> a1) >> 00:0c.0 PCI bridge: NVIDIA Corporation MCP73 PCI Express bridge (rev >> a1) >> 00:0e.0 SATA controller: NVIDIA Corporation GeForce 7100/nForce 630i >> SATA (rev a2) >> 00:0f.0 Ethernet controller: NVIDIA Corporation MCP73 Ethernet (rev a2) >> 00:10.0 VGA compatible controller: NVIDIA Corporation C73 [GeForce 7100 >> / nForce 630i] (rev a2) >> 01:05.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge >> (non-transparent mode) (rev 11) >> 01:06.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge >> (non-transparent mode) (rev 15) >> 01:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 >> IEEE-1394a-2000 Controller (PHY/Link) >> 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 02:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 02:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 02:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 02:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 02:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 02:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 03:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 03:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 03:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 03:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 03:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 03:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 03:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> Capture (rev 11) >> 03:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio >> Capture >> (rev 11) >> 04:00.0 Multimedia video controller: Micronas Semiconductor Holding AG >> nGene PCI-Express Multimedia Controller (rev 01) >> >> >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" >> in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > Maybe it's like one of these, which requires a line in modprobe.conf > > http://linuxtv.org/wiki/index.php/Kodicom_4400R > > R, > Andy Good idea. I had tried that driver I think, but I hadn't seen the bit about the master chip being second. Sadly no joy with my card. Thanks anyway, Rob. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
