From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
clk_set_rate(), clk_prepare_enable() functions can fail, so check the return
values to avoid surprises.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
---
Changes for v2:
1: Called regulator_bulk_disable() in the error path
drivers/media/i2c/mt9p031.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index e5ddf47..05278f5 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -222,12 +222,15 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
struct mt9p031_platform_data *pdata = mt9p031->pdata;
+ int ret;
mt9p031->clk = devm_clk_get(&client->dev, NULL);
if (IS_ERR(mt9p031->clk))
return PTR_ERR(mt9p031->clk);
- clk_set_rate(mt9p031->clk, pdata->ext_freq);
+ ret = clk_set_rate(mt9p031->clk, pdata->ext_freq);
+ if (ret < 0)
+ return ret;
mt9p031->pll.ext_clock = pdata->ext_freq;
mt9p031->pll.pix_clock = pdata->target_freq;
@@ -286,8 +289,14 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
return ret;
/* Emable clock */
- if (mt9p031->clk)
- clk_prepare_enable(mt9p031->clk);
+ if (mt9p031->clk) {
+ ret = clk_prepare_enable(mt9p031->clk);
+ if (ret) {
+ regulator_bulk_disable(ARRAY_SIZE(mt9p031->regulators),
+ mt9p031->regulators);
+ return ret;
+ }
+ }
/* Now RESET_BAR must be high */
if (gpio_is_valid(mt9p031->reset)) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
