Re: [PATCH 1/2] cx24117[v4]: Add new dvb-frontend.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mike,

New patches sent.
If for some reason I need to make some other changes can I submit new
patches against your cx24117 branch?
I would like to add a few more register and full demod command names
if I have the time, else I can do it later against the media_tree...

Regards,
Luis

2013/10/2 Michael Krufky <mkrufky@xxxxxxxxxxx>:
> On Wed, Oct 2, 2013 at 10:19 AM, Luis Alves <ljalvs@xxxxxxxxx> wrote:
>> Hi Michael,
>>
>> A bit of background. The cx24117 is a dual tuner/demod and both share
>> a single i2c bus.
>> The way I found (at that time) to share the same i2c bus on 2
>> different frontend instances was to create a mutex that will deal with
>> concurrent i2c bus accesses when both FEs will try to issue a command
>> to the demod.
>>
>> So I created a struct cx24117_priv that both frontends share (the
>> mutex is in there among other shared variables) and how I pass a
>> pointer to that struct to both instances of the cx24117 is through the
>> attach function.
>>
>> When attaching the cx24117, this should happen:
>> 1st attach call: the passed pointer is NULL so the attach function
>> will know that it is the first demod being attached.
>> 2nd attach call: the passed pointer is pointing to the first FE, so it
>> will know that theres already a priv struct allocated and gets it.
>>
>> Personally I also don't like this solution, but it was the only way I
>> found to do it from cx23885 module.
>>
>> I'll be glad to change the method if a better solution is provided.
>>
>> Thanks and Regards,
>> Luis
>>
>>
>>
>> 2013/10/2 Michael Krufky <mkrufky@xxxxxxxxxxx>:
>>> On Wed, Jul 24, 2013 at 11:37 AM, Antti Palosaari <crope@xxxxxx> wrote:
>>>> On 07/24/2013 06:18 PM, Luis Alves wrote:
>>>>>
>>>>> v4:
>>>>> Patch order fixed.
>>>>> Changed some msleep's to clear checkpatch warning.
>>>>>
>>>>>
>>>>> Signed-off-by: Luis Alves <ljalvs@xxxxxxxxx>
>>>>
>>>>
>>>> Reviewed-by: Antti Palosaari <crope@xxxxxx>
>>>>
>>>>
>>>>
>>>>> ---
>>>>>   drivers/media/dvb-frontends/Kconfig   |    7 +
>>>>>   drivers/media/dvb-frontends/Makefile  |    1 +
>>>>>   drivers/media/dvb-frontends/cx24117.c | 1621
>>>>> +++++++++++++++++++++++++++++++++
>>>>>   drivers/media/dvb-frontends/cx24117.h |   47 +
>>>>>   4 files changed, 1676 insertions(+)
>>>>>   create mode 100644 drivers/media/dvb-frontends/cx24117.c
>>>>>   create mode 100644 drivers/media/dvb-frontends/cx24117.h
>>>>>
>>>>> diff --git a/drivers/media/dvb-frontends/Kconfig
>>>>> b/drivers/media/dvb-frontends/Kconfig
>>>>> index 0e2ec6f..bddbab4 100644
>>>>> --- a/drivers/media/dvb-frontends/Kconfig
>>>>> +++ b/drivers/media/dvb-frontends/Kconfig
>>>>> @@ -200,6 +200,13 @@ config DVB_CX24116
>>>>>         help
>>>>>           A DVB-S/S2 tuner module. Say Y when you want to support this
>>>>> frontend.
>>>>>
>>>>> +config DVB_CX24117
>>>>> +       tristate "Conexant CX24117 based"
>>>>> +       depends on DVB_CORE && I2C
>>>>> +       default m if !MEDIA_SUBDRV_AUTOSELECT
>>>>> +       help
>>>>> +         A Dual DVB-S/S2 tuner module. Say Y when you want to support
>>>>> this frontend.
>>>>> +
>>>>>   config DVB_SI21XX
>>>>>         tristate "Silicon Labs SI21XX based"
>>>>>         depends on DVB_CORE && I2C
>>>>> diff --git a/drivers/media/dvb-frontends/Makefile
>>>>> b/drivers/media/dvb-frontends/Makefile
>>>>> index cebc0fa..f9cb43d 100644
>>>>> --- a/drivers/media/dvb-frontends/Makefile
>>>>> +++ b/drivers/media/dvb-frontends/Makefile
>>>>> @@ -76,6 +76,7 @@ obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
>>>>>   obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
>>>>>   obj-$(CONFIG_DVB_AF9013) += af9013.o
>>>>>   obj-$(CONFIG_DVB_CX24116) += cx24116.o
>>>>> +obj-$(CONFIG_DVB_CX24117) += cx24117.o
>>>>>   obj-$(CONFIG_DVB_SI21XX) += si21xx.o
>>>>>   obj-$(CONFIG_DVB_STV0288) += stv0288.o
>>>>>   obj-$(CONFIG_DVB_STB6000) += stb6000.o
>>>>> diff --git a/drivers/media/dvb-frontends/cx24117.c
>>>>> b/drivers/media/dvb-frontends/cx24117.c
>>>>> new file mode 100644
>>>>> index 0000000..3b63913
>>>>> --- /dev/null
>>>>> +++ b/drivers/media/dvb-frontends/cx24117.c
>>>>> @@ -0,0 +1,1621 @@
>>>>> +/*
>>>>> +    Conexant cx24117/cx24132 - Dual DVBS/S2 Satellite demod/tuner driver
>>>>> +
>>>>> +    Copyright (C) 2013 Luis Alves <ljalvs@xxxxxxxxx>
>>>>> +       July, 6th 2013
>>>>> +           First release based on cx24116 driver by:
>>>>> +           Steven Toth and Georg Acher, Darron Broad, Igor Liplianin
>>>>> +           Cards currently supported:
>>>>> +               TBS6980 - Dual DVBS/S2 PCIe card
>>>>> +               TBS6981 - Dual DVBS/S2 PCIe card
>>>>> +
>>>>> +    This program is free software; you can redistribute it and/or modify
>>>>> +    it under the terms of the GNU General Public License as published by
>>>>> +    the Free Software Foundation; either version 2 of the License, or
>>>>> +    (at your option) any later version.
>>>>> +
>>>>> +    This program is distributed in the hope that it will be useful,
>>>>> +    but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>> +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>>> +    GNU General Public License for more details.
>>>>> +
>>>>> +    You should have received a copy of the GNU General Public License
>>>>> +    along with this program; if not, write to the Free Software
>>>>> +    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>>>> +*/
>>>>> +
>>>>> +#include <linux/slab.h>
>>>>> +#include <linux/kernel.h>
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/moduleparam.h>
>>>>> +#include <linux/init.h>
>>>>> +#include <linux/firmware.h>
>>>>> +
>>>>> +#include "dvb_frontend.h"
>>>>> +#include "cx24117.h"
>>>>> +
>>>>> +
>>>>> +#define CX24117_DEFAULT_FIRMWARE "dvb-fe-cx24117.fw"
>>>>> +#define CX24117_SEARCH_RANGE_KHZ 5000
>>>>> +
>>>>> +/* known registers */
>>>>> +#define CX24117_REG_COMMAND      (0x00)      /* command buffer */
>>>>> +#define CX24117_REG_EXECUTE      (0x1f)      /* execute command */
>>>>> +
>>>>> +#define CX24117_REG_FREQ3_0      (0x34)      /* frequency */
>>>>> +#define CX24117_REG_FREQ2_0      (0x35)
>>>>> +#define CX24117_REG_FREQ1_0      (0x36)
>>>>> +#define CX24117_REG_STATE0       (0x39)
>>>>> +#define CX24117_REG_SSTATUS0     (0x3a)      /* demod0 signal high /
>>>>> status */
>>>>> +#define CX24117_REG_SIGNAL0      (0x3b)
>>>>> +#define CX24117_REG_FREQ5_0      (0x3c)      /* +-freq */
>>>>> +#define CX24117_REG_FREQ6_0      (0x3d)
>>>>> +#define CX24117_REG_SRATE2_0     (0x3e)      /* +- 1000 * srate */
>>>>> +#define CX24117_REG_SRATE1_0     (0x3f)
>>>>> +#define CX24117_REG_QUALITY2_0   (0x40)
>>>>> +#define CX24117_REG_QUALITY1_0   (0x41)
>>>>> +
>>>>> +#define CX24117_REG_BER4_0       (0x47)
>>>>> +#define CX24117_REG_BER3_0       (0x48)
>>>>> +#define CX24117_REG_BER2_0       (0x49)
>>>>> +#define CX24117_REG_BER1_0       (0x4a)
>>>>> +#define CX24117_REG_DVBS_UCB2_0  (0x4b)
>>>>> +#define CX24117_REG_DVBS_UCB1_0  (0x4c)
>>>>> +#define CX24117_REG_DVBS2_UCB2_0 (0x50)
>>>>> +#define CX24117_REG_DVBS2_UCB1_0 (0x51)
>>>>> +#define CX24117_REG_QSTATUS0     (0x93)
>>>>> +#define CX24117_REG_CLKDIV0      (0xe6)
>>>>> +#define CX24117_REG_RATEDIV0     (0xf0)
>>>>> +
>>>>> +
>>>>> +#define CX24117_REG_FREQ3_1      (0x55)      /* frequency */
>>>>> +#define CX24117_REG_FREQ2_1      (0x56)
>>>>> +#define CX24117_REG_FREQ1_1      (0x57)
>>>>> +#define CX24117_REG_STATE1       (0x5a)
>>>>> +#define CX24117_REG_SSTATUS1     (0x5b)      /* demod1 signal high /
>>>>> status */
>>>>> +#define CX24117_REG_SIGNAL1      (0x5c)
>>>>> +#define CX24117_REG_FREQ5_1      (0x5d)      /* +- freq */
>>>>> +#define CX24117_REG_FREQ4_1      (0x5e)
>>>>> +#define CX24117_REG_SRATE2_1     (0x5f)
>>>>> +#define CX24117_REG_SRATE1_1     (0x60)
>>>>> +#define CX24117_REG_QUALITY2_1   (0x61)
>>>>> +#define CX24117_REG_QUALITY1_1   (0x62)
>>>>> +#define CX24117_REG_BER4_1       (0x68)
>>>>> +#define CX24117_REG_BER3_1       (0x69)
>>>>> +#define CX24117_REG_BER2_1       (0x6a)
>>>>> +#define CX24117_REG_BER1_1       (0x6b)
>>>>> +#define CX24117_REG_DVBS_UCB2_1  (0x6c)
>>>>> +#define CX24117_REG_DVBS_UCB1_1  (0x6d)
>>>>> +#define CX24117_REG_DVBS2_UCB2_1 (0x71)
>>>>> +#define CX24117_REG_DVBS2_UCB1_1 (0x72)
>>>>> +#define CX24117_REG_QSTATUS1     (0x9f)
>>>>> +#define CX24117_REG_CLKDIV1      (0xe7)
>>>>> +#define CX24117_REG_RATEDIV1     (0xf1)
>>>>> +
>>>>> +
>>>>> +/* arg buffer size */
>>>>> +#define CX24117_ARGLEN       (0x1e)
>>>>> +
>>>>> +/* rolloff */
>>>>> +#define CX24117_ROLLOFF_020  (0x00)
>>>>> +#define CX24117_ROLLOFF_025  (0x01)
>>>>> +#define CX24117_ROLLOFF_035  (0x02)
>>>>> +
>>>>> +/* pilot bit */
>>>>> +#define CX24117_PILOT_OFF    (0x00)
>>>>> +#define CX24117_PILOT_ON     (0x40)
>>>>> +#define CX24117_PILOT_AUTO   (0x80)
>>>>> +
>>>>> +/* signal status */
>>>>> +#define CX24117_HAS_SIGNAL   (0x01)
>>>>> +#define CX24117_HAS_CARRIER  (0x02)
>>>>> +#define CX24117_HAS_VITERBI  (0x04)
>>>>> +#define CX24117_HAS_SYNCLOCK (0x08)
>>>>> +#define CX24117_STATUS_MASK  (0x0f)
>>>>> +#define CX24117_SIGNAL_MASK  (0xc0)
>>>>> +
>>>>> +
>>>>> +/* arg offset for DiSEqC */
>>>>> +#define CX24117_DISEQC_DEMOD  (1)
>>>>> +#define CX24117_DISEQC_BURST  (2)
>>>>> +#define CX24117_DISEQC_ARG3_2 (3)   /* unknown value=2 */
>>>>> +#define CX24117_DISEQC_ARG4_0 (4)   /* unknown value=0 */
>>>>> +#define CX24117_DISEQC_ARG5_0 (5)   /* unknown value=0 */
>>>>> +#define CX24117_DISEQC_MSGLEN (6)
>>>>> +#define CX24117_DISEQC_MSGOFS (7)
>>>>> +
>>>>> +/* DiSEqC burst */
>>>>> +#define CX24117_DISEQC_MINI_A (0)
>>>>> +#define CX24117_DISEQC_MINI_B (1)
>>>>> +
>>>>> +
>>>>> +#define CX24117_PNE    (0) /* 0 disabled / 2 enabled */
>>>>> +#define CX24117_OCC    (1) /* 0 disabled / 1 enabled */
>>>>> +
>>>>> +
>>>>> +enum cmds {
>>>>> +       CMD_SET_VCO     = 0x10,
>>>>> +       CMD_TUNEREQUEST = 0x11,
>>>>> +       CMD_MPEGCONFIG  = 0x13,
>>>>> +       CMD_TUNERINIT   = 0x14,
>>>>> +       CMD_LNBSEND     = 0x21, /* Formerly CMD_SEND_DISEQC */
>>>>> +       CMD_LNBDCLEVEL  = 0x22,
>>>>> +       CMD_SET_TONE    = 0x23,
>>>>> +       CMD_UPDFWVERS   = 0x35,
>>>>> +       CMD_TUNERSLEEP  = 0x36,
>>>>> +};
>>>>> +
>>>>> +/* The Demod/Tuner can't easily provide these, we cache them */
>>>>> +struct cx24117_tuning {
>>>>> +       u32 frequency;
>>>>> +       u32 symbol_rate;
>>>>> +       fe_spectral_inversion_t inversion;
>>>>> +       fe_code_rate_t fec;
>>>>> +
>>>>> +       fe_delivery_system_t delsys;
>>>>> +       fe_modulation_t modulation;
>>>>> +       fe_pilot_t pilot;
>>>>> +       fe_rolloff_t rolloff;
>>>>> +
>>>>> +       /* Demod values */
>>>>> +       u8 fec_val;
>>>>> +       u8 fec_mask;
>>>>> +       u8 inversion_val;
>>>>> +       u8 pilot_val;
>>>>> +       u8 rolloff_val;
>>>>> +};
>>>>> +
>>>>> +/* Basic commands that are sent to the firmware */
>>>>> +struct cx24117_cmd {
>>>>> +       u8 len;
>>>>> +       u8 args[CX24117_ARGLEN];
>>>>> +};
>>>>> +
>>>>> +/* common to both fe's */
>>>>> +struct cx24117_priv {
>>>>> +       u8 demod_address;
>>>>> +       struct i2c_adapter *i2c;
>>>>> +       u8 skip_fw_load;
>>>>> +
>>>>> +       struct mutex fe_lock;
>>>>> +       atomic_t fe_nr;
>>>>> +};
>>>>> +
>>>>> +/* one per each fe */
>>>>> +struct cx24117_state {
>>>>> +       struct cx24117_priv *priv;
>>>>> +       struct dvb_frontend frontend;
>>>>> +
>>>>> +       struct cx24117_tuning dcur;
>>>>> +       struct cx24117_tuning dnxt;
>>>>> +       struct cx24117_cmd dsec_cmd;
>>>>> +
>>>>> +       int demod;
>>>>> +};
>>>>> +
>>>>> +/* modfec (modulation and FEC) lookup table */
>>>>> +/* Check cx24116.c for a detailed description of each field */
>>>>> +static struct cx24117_modfec {
>>>>> +       fe_delivery_system_t delivery_system;
>>>>> +       fe_modulation_t modulation;
>>>>> +       fe_code_rate_t fec;
>>>>> +       u8 mask;        /* In DVBS mode this is used to autodetect */
>>>>> +       u8 val;         /* Passed to the firmware to indicate mode
>>>>> selection */
>>>>> +} cx24117_modfec_modes[] = {
>>>>> +       /* QPSK. For unknown rates we set hardware to auto detect 0xfe
>>>>> 0x30 */
>>>>> +
>>>>> +       /*mod   fec       mask  val */
>>>>> +       { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 },
>>>>> +       { SYS_DVBS, QPSK, FEC_1_2,  0x02, 0x2e }, /* 00000010 00101110 */
>>>>> +       { SYS_DVBS, QPSK, FEC_2_3,  0x04, 0x2f }, /* 00000100 00101111 */
>>>>> +       { SYS_DVBS, QPSK, FEC_3_4,  0x08, 0x30 }, /* 00001000 00110000 */
>>>>> +       { SYS_DVBS, QPSK, FEC_4_5,  0xfe, 0x30 }, /* 000?0000 ?        */
>>>>> +       { SYS_DVBS, QPSK, FEC_5_6,  0x20, 0x31 }, /* 00100000 00110001 */
>>>>> +       { SYS_DVBS, QPSK, FEC_6_7,  0xfe, 0x30 }, /* 0?000000 ?        */
>>>>> +       { SYS_DVBS, QPSK, FEC_7_8,  0x80, 0x32 }, /* 10000000 00110010 */
>>>>> +       { SYS_DVBS, QPSK, FEC_8_9,  0xfe, 0x30 }, /* 0000000? ?        */
>>>>> +       { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 },
>>>>> +       /* NBC-QPSK */
>>>>> +       { SYS_DVBS2, QPSK, FEC_NONE, 0x00, 0x00 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_1_2,  0x00, 0x04 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_3_5,  0x00, 0x05 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_2_3,  0x00, 0x06 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_3_4,  0x00, 0x07 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_4_5,  0x00, 0x08 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_5_6,  0x00, 0x09 },
>>>>> +       { SYS_DVBS2, QPSK, FEC_8_9,  0x00, 0x0a },
>>>>> +       { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b },
>>>>> +       { SYS_DVBS2, QPSK, FEC_AUTO, 0x00, 0x00 },
>>>>> +       /* 8PSK */
>>>>> +       { SYS_DVBS2, PSK_8, FEC_NONE, 0x00, 0x00 },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_3_5,  0x00, 0x0c },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_2_3,  0x00, 0x0d },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_3_4,  0x00, 0x0e },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_5_6,  0x00, 0x0f },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_8_9,  0x00, 0x10 },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 },
>>>>> +       { SYS_DVBS2, PSK_8, FEC_AUTO, 0x00, 0x00 },
>>>>> +       /*
>>>>> +        * 'val' can be found in the FECSTATUS register when tuning.
>>>>> +        * FECSTATUS will give the actual FEC in use if tuning was
>>>>> successful.
>>>>> +        */
>>>>> +};
>>>>> +
>>>>> +
>>>>> +static int cx24117_writereg(struct cx24117_state *state, u8 reg, u8 data)
>>>>> +{
>>>>> +       u8 buf[] = { reg, data };
>>>>> +       struct i2c_msg msg = { .addr = state->priv->demod_address,
>>>>> +               .flags = 0, .buf = buf, .len = 2 };
>>>>> +       int ret;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +                       "%s() demod%d i2c wr @0x%02x=0x%02x\n",
>>>>> +                       __func__, state->demod, reg, data);
>>>>> +
>>>>> +       ret = i2c_transfer(state->priv->i2c, &msg, 1);
>>>>> +       if (ret < 0) {
>>>>> +               dev_warn(&state->priv->i2c->dev,
>>>>> +                       "%s: demod%d i2c wr err(%i) @0x%02x=0x%02x\n",
>>>>> +                       KBUILD_MODNAME, state->demod, ret, reg, data);
>>>>> +               return ret;
>>>>> +       }
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_writecmd(struct cx24117_state *state,
>>>>> +       struct cx24117_cmd *cmd)
>>>>> +{
>>>>> +       struct i2c_msg msg;
>>>>> +       u8 buf[CX24117_ARGLEN+1];
>>>>> +       int ret;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +                       "%s() demod%d i2c wr cmd len=%d\n",
>>>>> +                       __func__, state->demod, cmd->len);
>>>>> +
>>>>> +       buf[0] = CX24117_REG_COMMAND;
>>>>> +       memcpy(&buf[1], cmd->args, cmd->len);
>>>>> +
>>>>> +       msg.addr = state->priv->demod_address;
>>>>> +       msg.flags = 0;
>>>>> +       msg.len = cmd->len+1;
>>>>> +       msg.buf = buf;
>>>>> +       ret = i2c_transfer(state->priv->i2c, &msg, 1);
>>>>> +       if (ret < 0) {
>>>>> +               dev_warn(&state->priv->i2c->dev,
>>>>> +                       "%s: demod%d i2c wr cmd err(%i) len=%d\n",
>>>>> +                       KBUILD_MODNAME, state->demod, ret, cmd->len);
>>>>> +               return ret;
>>>>> +       }
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_readreg(struct cx24117_state *state, u8 reg)
>>>>> +{
>>>>> +       int ret;
>>>>> +       u8 recv = 0;
>>>>> +       struct i2c_msg msg[] = {
>>>>> +               { .addr = state->priv->demod_address, .flags = 0,
>>>>> +                       .buf = &reg, .len = 1 },
>>>>> +               { .addr = state->priv->demod_address, .flags = I2C_M_RD,
>>>>> +                       .buf = &recv, .len = 1 }
>>>>> +       };
>>>>> +
>>>>> +       ret = i2c_transfer(state->priv->i2c, msg, 2);
>>>>> +       if (ret < 0) {
>>>>> +               dev_warn(&state->priv->i2c->dev,
>>>>> +                       "%s: demod%d i2c rd err(%d) @0x%x\n",
>>>>> +                       KBUILD_MODNAME, state->demod, ret, reg);
>>>>> +               return ret;
>>>>> +       }
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d i2c rd
>>>>> @0x%02x=0x%02x\n",
>>>>> +               __func__, state->demod, reg, recv);
>>>>> +
>>>>> +       return recv;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_readregN(struct cx24117_state *state,
>>>>> +       u8 reg, u8 *buf, int len)
>>>>> +{
>>>>> +       int ret;
>>>>> +       struct i2c_msg msg[] = {
>>>>> +               { .addr = state->priv->demod_address, .flags = 0,
>>>>> +                       .buf = &reg, .len = 1 },
>>>>> +               { .addr = state->priv->demod_address, .flags = I2C_M_RD,
>>>>> +                       .buf = buf, .len = len }
>>>>> +       };
>>>>> +
>>>>> +       ret = i2c_transfer(state->priv->i2c, msg, 2);
>>>>> +       if (ret < 0) {
>>>>> +               dev_warn(&state->priv->i2c->dev,
>>>>> +                       "%s: demod%d i2c rd err(%d) @0x%x\n",
>>>>> +                       KBUILD_MODNAME, state->demod, ret, reg);
>>>>> +               return ret;
>>>>> +       }
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_set_inversion(struct cx24117_state *state,
>>>>> +       fe_spectral_inversion_t inversion)
>>>>> +{
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n",
>>>>> +               __func__, inversion, state->demod);
>>>>> +
>>>>> +       switch (inversion) {
>>>>> +       case INVERSION_OFF:
>>>>> +               state->dnxt.inversion_val = 0x00;
>>>>> +               break;
>>>>> +       case INVERSION_ON:
>>>>> +               state->dnxt.inversion_val = 0x04;
>>>>> +               break;
>>>>> +       case INVERSION_AUTO:
>>>>> +               state->dnxt.inversion_val = 0x0C;
>>>>> +               break;
>>>>> +       default:
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       state->dnxt.inversion = inversion;
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_lookup_fecmod(struct cx24117_state *state,
>>>>> +       fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f)
>>>>> +{
>>>>> +       int i, ret = -EINVAL;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s(demod(0x%02x,0x%02x) demod%d\n",
>>>>> +               __func__, m, f, state->demod);
>>>>> +
>>>>> +       for (i = 0; i < ARRAY_SIZE(cx24117_modfec_modes); i++) {
>>>>> +               if ((d == cx24117_modfec_modes[i].delivery_system) &&
>>>>> +                       (m == cx24117_modfec_modes[i].modulation) &&
>>>>> +                       (f == cx24117_modfec_modes[i].fec)) {
>>>>> +                               ret = i;
>>>>> +                               break;
>>>>> +                       }
>>>>> +       }
>>>>> +
>>>>> +       return ret;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_set_fec(struct cx24117_state *state,
>>>>> +       fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t
>>>>> fec)
>>>>> +{
>>>>> +       int ret;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s(0x%02x,0x%02x) demod%d\n",
>>>>> +               __func__, mod, fec, state->demod);
>>>>> +
>>>>> +       ret = cx24117_lookup_fecmod(state, delsys, mod, fec);
>>>>> +       if (ret < 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       state->dnxt.fec = fec;
>>>>> +       state->dnxt.fec_val = cx24117_modfec_modes[ret].val;
>>>>> +       state->dnxt.fec_mask = cx24117_modfec_modes[ret].mask;
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s() demod%d mask/val = 0x%02x/0x%02x\n", __func__,
>>>>> +               state->demod, state->dnxt.fec_mask, state->dnxt.fec_val);
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_set_symbolrate(struct cx24117_state *state, u32 rate)
>>>>> +{
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n",
>>>>> +               __func__, rate, state->demod);
>>>>> +
>>>>> +       state->dnxt.symbol_rate = rate;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s() demod%d symbol_rate = %d\n",
>>>>> +               __func__, state->demod, rate);
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_load_firmware(struct dvb_frontend *fe,
>>>>> +       const struct firmware *fw);
>>>>> +
>>>>> +static int cx24117_firmware_ondemand(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       const struct firmware *fw;
>>>>> +       int ret = 0;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d skip_fw_load=%d\n",
>>>>> +               __func__, state->demod, state->priv->skip_fw_load);
>>>>> +
>>>>> +       if (state->priv->skip_fw_load)
>>>>> +               return 0;
>>>>> +
>>>>> +       /* check if firmware if already running */
>>>>> +       if (cx24117_readreg(state, 0xeb) != 0xa) {
>>>>> +               /* Load firmware */
>>>>> +               /* request the firmware, this will block until loaded */
>>>>> +               dev_dbg(&state->priv->i2c->dev,
>>>>> +                       "%s: Waiting for firmware upload (%s)...\n",
>>>>> +                       __func__, CX24117_DEFAULT_FIRMWARE);
>>>>> +               ret = request_firmware(&fw, CX24117_DEFAULT_FIRMWARE,
>>>>> +                       state->priv->i2c->dev.parent);
>>>>> +               dev_dbg(&state->priv->i2c->dev,
>>>>> +                       "%s: Waiting for firmware upload(2)...\n",
>>>>> __func__);
>>>>> +               if (ret) {
>>>>> +                       dev_err(&state->priv->i2c->dev,
>>>>> +                               "%s: No firmware uploaded "
>>>>> +                               "(timeout or file not found?)\n",
>>>>> __func__);
>>>>> +                       return ret;
>>>>> +               }
>>>>> +
>>>>> +               /* Make sure we don't recurse back through here
>>>>> +                * during loading */
>>>>> +               state->priv->skip_fw_load = 1;
>>>>> +
>>>>> +               ret = cx24117_load_firmware(fe, fw);
>>>>> +               if (ret)
>>>>> +                       dev_err(&state->priv->i2c->dev,
>>>>> +                               "%s: Writing firmware failed\n",
>>>>> __func__);
>>>>> +               release_firmware(fw);
>>>>> +
>>>>> +               dev_info(&state->priv->i2c->dev,
>>>>> +                       "%s: Firmware upload %s\n", __func__,
>>>>> +                       ret == 0 ? "complete" : "failed");
>>>>> +
>>>>> +               /* Ensure firmware is always loaded if required */
>>>>> +               state->priv->skip_fw_load = 0;
>>>>> +       }
>>>>> +
>>>>> +       return ret;
>>>>> +}
>>>>> +
>>>>> +/* Take a basic firmware command structure, format it
>>>>> + * and forward it for processing
>>>>> + */
>>>>> +static int cx24117_cmd_execute_nolock(struct dvb_frontend *fe,
>>>>> +       struct cx24117_cmd *cmd)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int i, ret;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
>>>>> +               __func__, state->demod);
>>>>> +
>>>>> +       /* Load the firmware if required */
>>>>> +       ret = cx24117_firmware_ondemand(fe);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* Write the command */
>>>>> +       cx24117_writecmd(state, cmd);
>>>>> +
>>>>> +       /* Start execution and wait for cmd to terminate */
>>>>> +       cx24117_writereg(state, CX24117_REG_EXECUTE, 0x01);
>>>>> +       i = 0;
>>>>> +       while (cx24117_readreg(state, CX24117_REG_EXECUTE)) {
>>>>> +               msleep(20);
>>>>> +               if (i++ > 40) {
>>>>> +                       /* Avoid looping forever if the firmware does
>>>>> +                               not respond */
>>>>> +                       dev_warn(&state->priv->i2c->dev,
>>>>> +                               "%s() Firmware not responding\n",
>>>>> __func__);
>>>>> +                       return -EIO;
>>>>> +               }
>>>>> +       }
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_cmd_execute(struct dvb_frontend *fe, struct
>>>>> cx24117_cmd *cmd)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int ret;
>>>>> +
>>>>> +       mutex_lock(&state->priv->fe_lock);
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, cmd);
>>>>> +       mutex_unlock(&state->priv->fe_lock);
>>>>> +
>>>>> +       return ret;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_load_firmware(struct dvb_frontend *fe,
>>>>> +       const struct firmware *fw)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       int i, ret;
>>>>> +       unsigned char vers[4];
>>>>> +
>>>>> +       struct i2c_msg msg;
>>>>> +       u8 *buf;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s() demod%d FW is %zu bytes (%02x %02x .. %02x %02x)\n",
>>>>> +               __func__, state->demod, fw->size, fw->data[0],
>>>>> fw->data[1],
>>>>> +               fw->data[fw->size-2], fw->data[fw->size-1]);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xea, 0x00);
>>>>> +       cx24117_writereg(state, 0xea, 0x01);
>>>>> +       cx24117_writereg(state, 0xea, 0x00);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xce, 0x92);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xfb, 0x00);
>>>>> +       cx24117_writereg(state, 0xfc, 0x00);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xc3, 0x04);
>>>>> +       cx24117_writereg(state, 0xc4, 0x04);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xce, 0x00);
>>>>> +       cx24117_writereg(state, 0xcf, 0x00);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xea, 0x00);
>>>>> +       cx24117_writereg(state, 0xeb, 0x0c);
>>>>> +       cx24117_writereg(state, 0xec, 0x06);
>>>>> +       cx24117_writereg(state, 0xed, 0x05);
>>>>> +       cx24117_writereg(state, 0xee, 0x03);
>>>>> +       cx24117_writereg(state, 0xef, 0x05);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xf3, 0x03);
>>>>> +       cx24117_writereg(state, 0xf4, 0x44);
>>>>> +
>>>>> +       cx24117_writereg(state, CX24117_REG_RATEDIV0, 0x04);
>>>>> +       cx24117_writereg(state, CX24117_REG_CLKDIV0, 0x02);
>>>>> +
>>>>> +       cx24117_writereg(state, CX24117_REG_RATEDIV1, 0x04);
>>>>> +       cx24117_writereg(state, CX24117_REG_CLKDIV1, 0x02);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xf2, 0x04);
>>>>> +       cx24117_writereg(state, 0xe8, 0x02);
>>>>> +       cx24117_writereg(state, 0xea, 0x01);
>>>>> +       cx24117_writereg(state, 0xc8, 0x00);
>>>>> +       cx24117_writereg(state, 0xc9, 0x00);
>>>>> +       cx24117_writereg(state, 0xca, 0x00);
>>>>> +       cx24117_writereg(state, 0xcb, 0x00);
>>>>> +       cx24117_writereg(state, 0xcc, 0x00);
>>>>> +       cx24117_writereg(state, 0xcd, 0x00);
>>>>> +       cx24117_writereg(state, 0xe4, 0x03);
>>>>> +       cx24117_writereg(state, 0xeb, 0x0a);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xfb, 0x00);
>>>>> +       cx24117_writereg(state, 0xe0, 0x76);
>>>>> +       cx24117_writereg(state, 0xf7, 0x81);
>>>>> +       cx24117_writereg(state, 0xf8, 0x00);
>>>>> +       cx24117_writereg(state, 0xf9, 0x00);
>>>>> +
>>>>> +       buf = kmalloc(fw->size + 1, GFP_KERNEL);
>>>>> +       if (buf == NULL) {
>>>>> +               state->priv->skip_fw_load = 0;
>>>>> +               return -ENOMEM;
>>>>> +       }
>>>>> +
>>>>> +       /* fw upload reg */
>>>>> +       buf[0] = 0xfa;
>>>>> +       memcpy(&buf[1], fw->data, fw->size);
>>>>> +
>>>>> +       /* prepare i2c message to send */
>>>>> +       msg.addr = state->priv->demod_address;
>>>>> +       msg.flags = 0;
>>>>> +       msg.len = fw->size + 1;
>>>>> +       msg.buf = buf;
>>>>> +
>>>>> +       /* send fw */
>>>>> +       ret = i2c_transfer(state->priv->i2c, &msg, 1);
>>>>> +       if (ret < 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       kfree(buf);
>>>>> +
>>>>> +       cx24117_writereg(state, 0xf7, 0x0c);
>>>>> +       cx24117_writereg(state, 0xe0, 0x00);
>>>>> +
>>>>> +       /* CMD 1B */
>>>>> +       cmd.args[0] = 0x1b;
>>>>> +       cmd.args[1] = 0x00;
>>>>> +       cmd.args[2] = 0x01;
>>>>> +       cmd.args[3] = 0x00;
>>>>> +       cmd.len = 4;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               goto error;
>>>>> +
>>>>> +       /* CMD 10 */
>>>>> +       cmd.args[0] = CMD_SET_VCO;
>>>>> +       cmd.args[1] = 0x06;
>>>>> +       cmd.args[2] = 0x2b;
>>>>> +       cmd.args[3] = 0xd8;
>>>>> +       cmd.args[4] = 0xa5;
>>>>> +       cmd.args[5] = 0xee;
>>>>> +       cmd.args[6] = 0x03;
>>>>> +       cmd.args[7] = 0x9d;
>>>>> +       cmd.args[8] = 0xfc;
>>>>> +       cmd.args[9] = 0x06;
>>>>> +       cmd.args[10] = 0x02;
>>>>> +       cmd.args[11] = 0x9d;
>>>>> +       cmd.args[12] = 0xfc;
>>>>> +       cmd.len = 13;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               goto error;
>>>>> +
>>>>> +       /* CMD 15 */
>>>>> +       cmd.args[0] = 0x15;
>>>>> +       cmd.args[1] = 0x00;
>>>>> +       cmd.args[2] = 0x01;
>>>>> +       cmd.args[3] = 0x00;
>>>>> +       cmd.args[4] = 0x00;
>>>>> +       cmd.args[5] = 0x01;
>>>>> +       cmd.args[6] = 0x01;
>>>>> +       cmd.args[7] = 0x01;
>>>>> +       cmd.args[8] = 0x00;
>>>>> +       cmd.args[9] = 0x05;
>>>>> +       cmd.args[10] = 0x02;
>>>>> +       cmd.args[11] = 0x02;
>>>>> +       cmd.args[12] = 0x00;
>>>>> +       cmd.len = 13;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               goto error;
>>>>> +
>>>>> +       /* CMD 13 */
>>>>> +       cmd.args[0] = CMD_MPEGCONFIG;
>>>>> +       cmd.args[1] = 0x00;
>>>>> +       cmd.args[2] = 0x00;
>>>>> +       cmd.args[3] = 0x00;
>>>>> +       cmd.args[4] = 0x01;
>>>>> +       cmd.args[5] = 0x00;
>>>>> +       cmd.len = 6;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               goto error;
>>>>> +
>>>>> +       /* CMD 14 */
>>>>> +       for (i = 0; i < 2; i++) {
>>>>> +               cmd.args[0] = CMD_TUNERINIT;
>>>>> +               cmd.args[1] = (u8) i;
>>>>> +               cmd.args[2] = 0x00;
>>>>> +               cmd.args[3] = 0x05;
>>>>> +               cmd.args[4] = 0x00;
>>>>> +               cmd.args[5] = 0x00;
>>>>> +               cmd.args[6] = 0x55;
>>>>> +               cmd.args[7] = 0x00;
>>>>> +               cmd.len = 8;
>>>>> +               ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +               if (ret != 0)
>>>>> +                       goto error;
>>>>> +       }
>>>>> +
>>>>> +       cx24117_writereg(state, 0xce, 0xc0);
>>>>> +       cx24117_writereg(state, 0xcf, 0x00);
>>>>> +       cx24117_writereg(state, 0xe5, 0x04);
>>>>> +
>>>>> +       /* Firmware CMD 35: Get firmware version */
>>>>> +       cmd.args[0] = CMD_UPDFWVERS;
>>>>> +       cmd.len = 2;
>>>>> +       for (i = 0; i < 4; i++) {
>>>>> +               cmd.args[1] = i;
>>>>> +               ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +               if (ret != 0)
>>>>> +                       goto error;
>>>>> +               vers[i] = cx24117_readreg(state, 0x33);
>>>>> +       }
>>>>> +       dev_info(&state->priv->i2c->dev,
>>>>> +               "%s: FW version %i.%i.%i.%i\n", __func__,
>>>>> +               vers[0], vers[1], vers[2], vers[3]);
>>>>> +       return 0;
>>>>> +error:
>>>>> +       state->priv->skip_fw_load = 0;
>>>>> +       dev_err(&state->priv->i2c->dev, "%s() Error running FW.\n",
>>>>> __func__);
>>>>> +       return ret;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_read_status(struct dvb_frontend *fe, fe_status_t
>>>>> *status)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int lock;
>>>>> +
>>>>> +       lock = cx24117_readreg(state,
>>>>> +               (state->demod == 0) ? CX24117_REG_SSTATUS0 :
>>>>> +                                     CX24117_REG_SSTATUS1) &
>>>>> +               CX24117_STATUS_MASK;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d status = 0x%02x\n",
>>>>> +               __func__, state->demod, lock);
>>>>> +
>>>>> +       *status = 0;
>>>>> +
>>>>> +       if (lock & CX24117_HAS_SIGNAL)
>>>>> +               *status |= FE_HAS_SIGNAL;
>>>>> +       if (lock & CX24117_HAS_CARRIER)
>>>>> +               *status |= FE_HAS_CARRIER;
>>>>> +       if (lock & CX24117_HAS_VITERBI)
>>>>> +               *status |= FE_HAS_VITERBI;
>>>>> +       if (lock & CX24117_HAS_SYNCLOCK)
>>>>> +               *status |= FE_HAS_SYNC | FE_HAS_LOCK;
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_read_ber(struct dvb_frontend *fe, u32 *ber)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int ret;
>>>>> +       u8 buf[4];
>>>>> +       u8 base_reg = (state->demod == 0) ?
>>>>> +                       CX24117_REG_BER4_0 :
>>>>> +                       CX24117_REG_BER4_1;
>>>>> +
>>>>> +       ret = cx24117_readregN(state, base_reg, buf, 4);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       *ber = (buf[0] << 24) | (buf[1] << 16) |
>>>>> +               (buf[1] << 8) | buf[0];
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d ber=0x%04x\n",
>>>>> +               __func__, state->demod, *ber);
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_read_signal_strength(struct dvb_frontend *fe,
>>>>> +       u16 *signal_strength)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       int ret;
>>>>> +       u16 sig_reading;
>>>>> +       u8 buf[2];
>>>>> +       u8 reg = (state->demod == 0) ?
>>>>> +               CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1;
>>>>> +
>>>>> +       /* Firmware CMD 1A */
>>>>> +       cmd.args[0] = 0x1a;
>>>>> +       cmd.args[1] = (u8) state->demod;
>>>>> +       cmd.len = 2;
>>>>> +       ret = cx24117_cmd_execute(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       ret = cx24117_readregN(state, reg, buf, 2);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +       sig_reading = ((buf[0] & CX24117_SIGNAL_MASK) << 2) | buf[1];
>>>>> +
>>>>> +       *signal_strength = -100 * sig_reading + 94324;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s() demod%d raw / cooked = 0x%04x / 0x%04x\n",
>>>>> +               __func__, state->demod, sig_reading, *signal_strength);
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_read_snr(struct dvb_frontend *fe, u16 *snr)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int ret;
>>>>> +       u8 buf[2];
>>>>> +       u8 reg = (state->demod == 0) ?
>>>>> +               CX24117_REG_QUALITY2_0 : CX24117_REG_QUALITY2_1;
>>>>> +
>>>>> +       ret = cx24117_readregN(state, reg, buf, 2);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       *snr = (buf[0] << 8) | buf[1];
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s() demod%d snr = 0x%04x\n",
>>>>> +               __func__, state->demod, *snr);
>>>>> +
>>>>> +       return ret;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       fe_delivery_system_t delsys =
>>>>> fe->dtv_property_cache.delivery_system;
>>>>> +       int ret;
>>>>> +       u8 buf[2];
>>>>> +       u8 reg = (state->demod == 0) ?
>>>>> +               CX24117_REG_DVBS_UCB2_0 :
>>>>> +               CX24117_REG_DVBS_UCB2_1;
>>>>> +
>>>>> +       switch (delsys) {
>>>>> +       case SYS_DVBS:
>>>>> +               break;
>>>>> +       case SYS_DVBS2:
>>>>> +               reg += (CX24117_REG_DVBS2_UCB2_0 -
>>>>> CX24117_REG_DVBS_UCB2_0);
>>>>> +               break;
>>>>> +       default:
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       ret = cx24117_readregN(state, reg, buf, 2);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +       *ucblocks = (buf[0] << 8) | buf[1];
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d ucb=0x%04x\n",
>>>>> +               __func__, state->demod, *ucblocks);
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +/* Overwrite the current tuning params, we are about to tune */
>>>>> +static void cx24117_clone_params(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       state->dcur = state->dnxt;
>>>>> +}
>>>>> +
>>>>> +/* Wait for LNB */
>>>>> +static int cx24117_wait_for_lnb(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int i;
>>>>> +       u8 val, reg = (state->demod == 0) ? CX24117_REG_QSTATUS0 :
>>>>> +                                           CX24117_REG_QSTATUS1;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d qstatus = 0x%02x\n",
>>>>> +               __func__, state->demod, cx24117_readreg(state, reg));
>>>>> +
>>>>> +       /* Wait for up to 300 ms */
>>>>> +       for (i = 0; i < 10; i++) {
>>>>> +               val = cx24117_readreg(state, reg) & 0x01;
>>>>> +               if (val != 0)
>>>>> +                       return 0;
>>>>> +               msleep(30);
>>>>> +       }
>>>>> +
>>>>> +       dev_warn(&state->priv->i2c->dev, "%s: demod%d LNB not ready\n",
>>>>> +               KBUILD_MODNAME, state->demod);
>>>>> +
>>>>> +       return -ETIMEDOUT; /* -EBUSY ? */
>>>>> +}
>>>>> +
>>>>> +static int cx24117_set_voltage(struct dvb_frontend *fe,
>>>>> +       fe_sec_voltage_t voltage)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       int ret;
>>>>> +       u8 reg = (state->demod == 0) ? 0x10 : 0x20;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d %s\n",
>>>>> +               __func__, state->demod,
>>>>> +               voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
>>>>> +               voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" :
>>>>> +               "SEC_VOLTAGE_OFF");
>>>>> +
>>>>> +       /* CMD 32 */
>>>>> +       cmd.args[0] = 0x32;
>>>>> +       cmd.args[1] = reg;
>>>>> +       cmd.args[2] = reg;
>>>>> +       cmd.len = 3;
>>>>> +       ret = cx24117_cmd_execute(fe, &cmd);
>>>>> +       if (ret)
>>>>> +               return ret;
>>>>> +
>>>>> +       if ((voltage == SEC_VOLTAGE_13) ||
>>>>> +           (voltage == SEC_VOLTAGE_18)) {
>>>>> +               /* CMD 33 */
>>>>> +               cmd.args[0] = 0x33;
>>>>> +               cmd.args[1] = reg;
>>>>> +               cmd.args[2] = reg;
>>>>> +               cmd.len = 3;
>>>>> +               ret = cx24117_cmd_execute(fe, &cmd);
>>>>> +               if (ret != 0)
>>>>> +                       return ret;
>>>>> +
>>>>> +               ret = cx24117_wait_for_lnb(fe);
>>>>> +               if (ret != 0)
>>>>> +                       return ret;
>>>>> +
>>>>> +               /* Wait for voltage/min repeat delay */
>>>>> +               msleep(100);
>>>>> +
>>>>> +               /* CMD 22 - CMD_LNBDCLEVEL */
>>>>> +               cmd.args[0] = CMD_LNBDCLEVEL;
>>>>> +               cmd.args[1] = state->demod ? 0 : 1;
>>>>> +               cmd.args[2] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00);
>>>>> +               cmd.len = 3;
>>>>> +
>>>>> +               /* Min delay time before DiSEqC send */
>>>>> +               msleep(20);
>>>>> +       } else {
>>>>> +               cmd.args[0] = 0x33;
>>>>> +               cmd.args[1] = 0x00;
>>>>> +               cmd.args[2] = reg;
>>>>> +               cmd.len = 3;
>>>>> +       }
>>>>> +
>>>>> +       return cx24117_cmd_execute(fe, &cmd);
>>>>> +}
>>>>> +
>>>>> +static int cx24117_set_tone(struct dvb_frontend *fe,
>>>>> +       fe_sec_tone_mode_t tone)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       int ret;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n",
>>>>> +               __func__, state->demod, tone);
>>>>> +       if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
>>>>> +               dev_warn(&state->priv->i2c->dev, "%s: demod%d invalid
>>>>> tone=%d\n",
>>>>> +                       KBUILD_MODNAME, state->demod, tone);
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       /* Wait for LNB ready */
>>>>> +       ret = cx24117_wait_for_lnb(fe);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* Min delay time after DiSEqC send */
>>>>> +       msleep(20);
>>>>> +
>>>>> +       /* Set the tone */
>>>>> +       /* CMD 23 - CMD_SET_TONE */
>>>>> +       cmd.args[0] = CMD_SET_TONE;
>>>>> +       cmd.args[1] = (state->demod ? 0 : 1);
>>>>> +       cmd.args[2] = 0x00;
>>>>> +       cmd.args[3] = 0x00;
>>>>> +       cmd.len = 5;
>>>>> +       switch (tone) {
>>>>> +       case SEC_TONE_ON:
>>>>> +               cmd.args[4] = 0x01;
>>>>> +               break;
>>>>> +       case SEC_TONE_OFF:
>>>>> +               cmd.args[4] = 0x00;
>>>>> +               break;
>>>>> +       }
>>>>> +
>>>>> +       msleep(20);
>>>>> +
>>>>> +       return cx24117_cmd_execute(fe, &cmd);
>>>>> +}
>>>>> +
>>>>> +/* Initialise DiSEqC */
>>>>> +static int cx24117_diseqc_init(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +
>>>>> +       /* Prepare a DiSEqC command */
>>>>> +       state->dsec_cmd.args[0] = CMD_LNBSEND;
>>>>> +
>>>>> +       /* demod */
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_DEMOD] = state->demod ? 0 : 1;
>>>>> +
>>>>> +       /* DiSEqC burst */
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_BURST] =
>>>>> CX24117_DISEQC_MINI_A;
>>>>> +
>>>>> +       /* Unknown */
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_ARG3_2] = 0x02;
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_ARG4_0] = 0x00;
>>>>> +
>>>>> +       /* Continuation flag? */
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_ARG5_0] = 0x00;
>>>>> +
>>>>> +       /* DiSEqC message length */
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = 0x00;
>>>>> +
>>>>> +       /* Command length */
>>>>> +       state->dsec_cmd.len = 7;
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +/* Send DiSEqC message */
>>>>> +static int cx24117_send_diseqc_msg(struct dvb_frontend *fe,
>>>>> +       struct dvb_diseqc_master_cmd *d)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       int i, ret;
>>>>> +
>>>>> +       /* Dump DiSEqC message */
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s: demod %d (",
>>>>> +               __func__, state->demod);
>>>>> +       for (i = 0; i < d->msg_len; i++)
>>>>> +               dev_dbg(&state->priv->i2c->dev, "0x%02x ", d->msg[i]);
>>>>> +       dev_dbg(&state->priv->i2c->dev, ")\n");
>>>>> +
>>>>> +       /* Validate length */
>>>>> +       if (d->msg_len > 15)
>>>>> +               return -EINVAL;
>>>>> +
>>>>> +       /* DiSEqC message */
>>>>> +       for (i = 0; i < d->msg_len; i++)
>>>>> +               state->dsec_cmd.args[CX24117_DISEQC_MSGOFS + i] =
>>>>> d->msg[i];
>>>>> +
>>>>> +       /* DiSEqC message length */
>>>>> +       state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = d->msg_len;
>>>>> +
>>>>> +       /* Command length */
>>>>> +       state->dsec_cmd.len = CX24117_DISEQC_MSGOFS +
>>>>> +               state->dsec_cmd.args[CX24117_DISEQC_MSGLEN];
>>>>> +
>>>>> +       /*
>>>>> +        * Message is sent with derived else cached burst
>>>>> +        *
>>>>> +        * WRITE PORT GROUP COMMAND 38
>>>>> +        *
>>>>> +        * 0/A/A: E0 10 38 F0..F3
>>>>> +        * 1/B/B: E0 10 38 F4..F7
>>>>> +        * 2/C/A: E0 10 38 F8..FB
>>>>> +        * 3/D/B: E0 10 38 FC..FF
>>>>> +        *
>>>>> +        * databyte[3]= 8421:8421
>>>>> +        *              ABCD:WXYZ
>>>>> +        *              CLR :SET
>>>>> +        *
>>>>> +        *              WX= PORT SELECT 0..3    (X=TONEBURST)
>>>>> +        *              Y = VOLTAGE             (0=13V, 1=18V)
>>>>> +        *              Z = BAND                (0=LOW, 1=HIGH(22K))
>>>>> +        */
>>>>> +       if (d->msg_len >= 4 && d->msg[2] == 0x38)
>>>>> +               state->dsec_cmd.args[CX24117_DISEQC_BURST] =
>>>>> +                       ((d->msg[3] & 4) >> 2);
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d burst=%d\n",
>>>>> +               __func__, state->demod,
>>>>> +               state->dsec_cmd.args[CX24117_DISEQC_BURST]);
>>>>> +
>>>>> +       /* Wait for LNB ready */
>>>>> +       ret = cx24117_wait_for_lnb(fe);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* Wait for voltage/min repeat delay */
>>>>> +       msleep(100);
>>>>> +
>>>>> +       /* Command */
>>>>> +       ret = cx24117_cmd_execute(fe, &state->dsec_cmd);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +       /*
>>>>> +        * Wait for send
>>>>> +        *
>>>>> +        * Eutelsat spec:
>>>>> +        * >15ms delay          + (XXX determine if FW does this, see
>>>>> set_tone)
>>>>> +        *  13.5ms per byte     +
>>>>> +        * >15ms delay          +
>>>>> +        *  12.5ms burst        +
>>>>> +        * >15ms delay            (XXX determine if FW does this, see
>>>>> set_tone)
>>>>> +        */
>>>>> +       msleep((state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] << 4) + 60);
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +/* Send DiSEqC burst */
>>>>> +static int cx24117_diseqc_send_burst(struct dvb_frontend *fe,
>>>>> +       fe_sec_mini_cmd_t burst)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s(%d) demod=%d\n",
>>>>> +               __func__, burst, state->demod);
>>>>> +
>>>>> +       /* DiSEqC burst */
>>>>> +       if (burst == SEC_MINI_A)
>>>>> +               state->dsec_cmd.args[CX24117_DISEQC_BURST] =
>>>>> +                       CX24117_DISEQC_MINI_A;
>>>>> +       else if (burst == SEC_MINI_B)
>>>>> +               state->dsec_cmd.args[CX24117_DISEQC_BURST] =
>>>>> +                       CX24117_DISEQC_MINI_B;
>>>>> +       else
>>>>> +               return -EINVAL;
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static void cx24117_release(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s demod%d\n",
>>>>> +               __func__, state->demod);
>>>>> +       if (!atomic_dec_and_test(&state->priv->fe_nr))
>>>>> +               kfree(state->priv);
>>>>> +       kfree(state);
>>>>> +}
>>>>> +
>>>>> +static struct dvb_frontend_ops cx24117_ops;
>>>>> +
>>>>> +struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
>>>>> +       struct i2c_adapter *i2c, struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = NULL;
>>>>> +       struct cx24117_priv *priv = NULL;
>>>>> +       int demod = 0;
>>>>> +
>>>>> +       /* first frontend attaching */
>>>>> +       /* allocate shared priv struct */
>>>>> +       if (fe == NULL) {
>>>>> +               priv = kzalloc(sizeof(struct cx24117_priv), GFP_KERNEL);
>>>>> +               if (priv == NULL)
>>>>> +                       goto error1;
>>>>> +               priv->i2c = i2c;
>>>>> +               priv->demod_address = config->demod_address;
>>>>> +               mutex_init(&priv->fe_lock);
>>>>> +       } else {
>>>>> +               demod = 1;
>>>>> +               priv = ((struct cx24117_state *)
>>>>> fe->demodulator_priv)->priv;
>>>>> +       }
>>>>> +
>>>>> +       /* allocate memory for the internal state */
>>>>> +       state = kzalloc(sizeof(struct cx24117_state), GFP_KERNEL);
>>>>> +       if (state == NULL)
>>>>> +               goto error2;
>>>>> +
>>>>> +       state->demod = demod;
>>>>> +       state->priv = priv;
>>>>> +
>>>>> +       /* test i2c bus for ack */
>>>>> +       if (demod == 0) {
>>>>> +               if (cx24117_readreg(state, 0x00) < 0)
>>>>> +                       goto error3;
>>>>> +       }
>>>>> +
>>>>> +       /* nr of frontends using the module */
>>>>> +       atomic_inc(&priv->fe_nr);
>>>>> +
>>>>> +       dev_info(&state->priv->i2c->dev,
>>>>> +               "%s: Attaching frontend %d\n",
>>>>> +               KBUILD_MODNAME, demod);
>>>>> +
>>>>> +       /* create dvb_frontend */
>>>>> +       memcpy(&state->frontend.ops, &cx24117_ops,
>>>>> +               sizeof(struct dvb_frontend_ops));
>>>>> +       state->frontend.demodulator_priv = state;
>>>>> +       return &state->frontend;
>>>>> +
>>>>> +error3:
>>>>> +       kfree(state);
>>>>> +error2:
>>>>> +       kfree(priv);
>>>>> +error1:
>>>>> +       return NULL;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(cx24117_attach);
>>>>> +
>>>>> +/*
>>>>> + * Initialise or wake up device
>>>>> + *
>>>>> + * Power config will reset and load initial firmware if required
>>>>> + */
>>>>> +static int cx24117_initfe(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       int ret;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
>>>>> +               __func__, state->demod);
>>>>> +
>>>>> +       mutex_lock(&state->priv->fe_lock);
>>>>> +
>>>>> +       /* Firmware CMD 36: Power config */
>>>>> +       cmd.args[0] = CMD_TUNERSLEEP;
>>>>> +       cmd.args[1] = (state->demod ? 1 : 0);
>>>>> +       cmd.args[2] = 0;
>>>>> +       cmd.len = 3;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       ret = cx24117_diseqc_init(fe);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* CMD 3C */
>>>>> +       cmd.args[0] = 0x3c;
>>>>> +       cmd.args[1] = (state->demod ? 1 : 0);
>>>>> +       cmd.args[2] = 0x10;
>>>>> +       cmd.args[3] = 0x10;
>>>>> +       cmd.len = 4;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* CMD 34 */
>>>>> +       cmd.args[0] = 0x34;
>>>>> +       cmd.args[1] = (state->demod ? 1 : 0);
>>>>> +       cmd.args[2] = CX24117_OCC;
>>>>> +       cmd.len = 3;
>>>>> +       ret = cx24117_cmd_execute_nolock(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       mutex_unlock(&state->priv->fe_lock);
>>>>> +
>>>>> +       return ret;
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Put device to sleep
>>>>> + */
>>>>> +static int cx24117_sleep(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
>>>>> +               __func__, state->demod);
>>>>> +
>>>>> +       /* Firmware CMD 36: Power config */
>>>>> +       cmd.args[0] = CMD_TUNERSLEEP;
>>>>> +       cmd.args[1] = (state->demod ? 1 : 0);
>>>>> +       cmd.args[2] = 1;
>>>>> +       cmd.len = 3;
>>>>> +       return cx24117_cmd_execute(fe, &cmd);
>>>>> +}
>>>>> +
>>>>> +/* dvb-core told us to tune, the tv property cache will be complete,
>>>>> + * it's safe for is to pull values and use them for tuning purposes.
>>>>> + */
>>>>> +static int cx24117_set_frontend(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct dtv_frontend_properties *c = &fe->dtv_property_cache;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       fe_status_t tunerstat;
>>>>> +       int i, status, ret, retune = 1;
>>>>> +       u8 reg_clkdiv, reg_ratediv;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
>>>>> +               __func__, state->demod);
>>>>> +
>>>>> +       switch (c->delivery_system) {
>>>>> +       case SYS_DVBS:
>>>>> +               dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S\n",
>>>>> +                       __func__, state->demod);
>>>>> +
>>>>> +               /* Only QPSK is supported for DVB-S */
>>>>> +               if (c->modulation != QPSK) {
>>>>> +                       dev_dbg(&state->priv->i2c->dev,
>>>>> +                               "%s() demod%d unsupported modulation
>>>>> (%d)\n",
>>>>> +                               __func__, state->demod, c->modulation);
>>>>> +                       return -EINVAL;
>>>>> +               }
>>>>> +
>>>>> +               /* Pilot doesn't exist in DVB-S, turn bit off */
>>>>> +               state->dnxt.pilot_val = CX24117_PILOT_OFF;
>>>>> +
>>>>> +               /* DVB-S only supports 0.35 */
>>>>> +               state->dnxt.rolloff_val = CX24117_ROLLOFF_035;
>>>>> +               break;
>>>>> +
>>>>> +       case SYS_DVBS2:
>>>>> +               dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S2\n",
>>>>> +                       __func__, state->demod);
>>>>> +
>>>>> +               /*
>>>>> +                * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
>>>>> +                * but not hardware auto detection
>>>>> +                */
>>>>> +               if (c->modulation != PSK_8 && c->modulation != QPSK) {
>>>>> +                       dev_dbg(&state->priv->i2c->dev,
>>>>> +                               "%s() demod%d unsupported modulation
>>>>> (%d)\n",
>>>>> +                               __func__, state->demod, c->modulation);
>>>>> +                       return -EOPNOTSUPP;
>>>>> +               }
>>>>> +
>>>>> +               switch (c->pilot) {
>>>>> +               case PILOT_AUTO:
>>>>> +                       state->dnxt.pilot_val = CX24117_PILOT_AUTO;
>>>>> +                       break;
>>>>> +               case PILOT_OFF:
>>>>> +                       state->dnxt.pilot_val = CX24117_PILOT_OFF;
>>>>> +                       break;
>>>>> +               case PILOT_ON:
>>>>> +                       state->dnxt.pilot_val = CX24117_PILOT_ON;
>>>>> +                       break;
>>>>> +               default:
>>>>> +                       dev_dbg(&state->priv->i2c->dev,
>>>>> +                               "%s() demod%d unsupported pilot mode
>>>>> (%d)\n",
>>>>> +                               __func__, state->demod, c->pilot);
>>>>> +                       return -EOPNOTSUPP;
>>>>> +               }
>>>>> +
>>>>> +               switch (c->rolloff) {
>>>>> +               case ROLLOFF_20:
>>>>> +                       state->dnxt.rolloff_val = CX24117_ROLLOFF_020;
>>>>> +                       break;
>>>>> +               case ROLLOFF_25:
>>>>> +                       state->dnxt.rolloff_val = CX24117_ROLLOFF_025;
>>>>> +                       break;
>>>>> +               case ROLLOFF_35:
>>>>> +                       state->dnxt.rolloff_val = CX24117_ROLLOFF_035;
>>>>> +                       break;
>>>>> +               case ROLLOFF_AUTO:
>>>>> +                       state->dnxt.rolloff_val = CX24117_ROLLOFF_035;
>>>>> +                       /* soft-auto rolloff */
>>>>> +                       retune = 3;
>>>>> +                       break;
>>>>> +               default:
>>>>> +                       dev_warn(&state->priv->i2c->dev,
>>>>> +                               "%s: demod%d unsupported rolloff (%d)\n",
>>>>> +                               KBUILD_MODNAME, state->demod, c->rolloff);
>>>>> +                       return -EOPNOTSUPP;
>>>>> +               }
>>>>> +               break;
>>>>> +
>>>>> +       default:
>>>>> +               dev_warn(&state->priv->i2c->dev,
>>>>> +                       "%s: demod %d unsupported delivery system (%d)\n",
>>>>> +                       KBUILD_MODNAME, state->demod, c->delivery_system);
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       state->dnxt.delsys = c->delivery_system;
>>>>> +       state->dnxt.modulation = c->modulation;
>>>>> +       state->dnxt.frequency = c->frequency;
>>>>> +       state->dnxt.pilot = c->pilot;
>>>>> +       state->dnxt.rolloff = c->rolloff;
>>>>> +
>>>>> +       ret = cx24117_set_inversion(state, c->inversion);
>>>>> +       if (ret !=  0)
>>>>> +               return ret;
>>>>> +
>>>>> +       ret = cx24117_set_fec(state,
>>>>> +               c->delivery_system, c->modulation, c->fec_inner);
>>>>> +       if (ret !=  0)
>>>>> +               return ret;
>>>>> +
>>>>> +       ret = cx24117_set_symbolrate(state, c->symbol_rate);
>>>>> +       if (ret !=  0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* discard the 'current' tuning parameters and prepare to tune */
>>>>> +       cx24117_clone_params(fe);
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: delsys      = %d\n", __func__, state->dcur.delsys);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: modulation  = %d\n", __func__,
>>>>> state->dcur.modulation);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: frequency   = %d\n", __func__,
>>>>> state->dcur.frequency);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: pilot       = %d (val = 0x%02x)\n", __func__,
>>>>> +               state->dcur.pilot, state->dcur.pilot_val);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: retune      = %d\n", __func__, retune);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: rolloff     = %d (val = 0x%02x)\n", __func__,
>>>>> +               state->dcur.rolloff, state->dcur.rolloff_val);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: symbol_rate = %d\n", __func__,
>>>>> state->dcur.symbol_rate);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: FEC         = %d (mask/val = 0x%02x/0x%02x)\n",
>>>>> __func__,
>>>>> +               state->dcur.fec, state->dcur.fec_mask,
>>>>> state->dcur.fec_val);
>>>>> +       dev_dbg(&state->priv->i2c->dev,
>>>>> +               "%s: Inversion   = %d (val = 0x%02x)\n", __func__,
>>>>> +               state->dcur.inversion, state->dcur.inversion_val);
>>>>> +
>>>>> +       /* Prepare a tune request */
>>>>> +       cmd.args[0] = CMD_TUNEREQUEST;
>>>>> +
>>>>> +       /* demod */
>>>>> +       cmd.args[1] = state->demod;
>>>>> +
>>>>> +       /* Frequency */
>>>>> +       cmd.args[2] = (state->dcur.frequency & 0xff0000) >> 16;
>>>>> +       cmd.args[3] = (state->dcur.frequency & 0x00ff00) >> 8;
>>>>> +       cmd.args[4] = (state->dcur.frequency & 0x0000ff);
>>>>> +
>>>>> +       /* Symbol Rate */
>>>>> +       cmd.args[5] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
>>>>> +       cmd.args[6] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
>>>>> +
>>>>> +       /* Automatic Inversion */
>>>>> +       cmd.args[7] = state->dcur.inversion_val;
>>>>> +
>>>>> +       /* Modulation / FEC / Pilot */
>>>>> +       cmd.args[8] = state->dcur.fec_val | state->dcur.pilot_val;
>>>>> +
>>>>> +       cmd.args[9] = CX24117_SEARCH_RANGE_KHZ >> 8;
>>>>> +       cmd.args[10] = CX24117_SEARCH_RANGE_KHZ & 0xff;
>>>>> +
>>>>> +       cmd.args[11] = state->dcur.rolloff_val;
>>>>> +       cmd.args[12] = state->dcur.fec_mask;
>>>>> +
>>>>> +       if (state->dcur.symbol_rate > 30000000) {
>>>>> +               reg_ratediv = 0x04;
>>>>> +               reg_clkdiv = 0x02;
>>>>> +       } else if (state->dcur.symbol_rate > 10000000) {
>>>>> +               reg_ratediv = 0x06;
>>>>> +               reg_clkdiv = 0x03;
>>>>> +       } else {
>>>>> +               reg_ratediv = 0x0a;
>>>>> +               reg_clkdiv = 0x05;
>>>>> +       }
>>>>> +
>>>>> +       cmd.args[13] = reg_ratediv;
>>>>> +       cmd.args[14] = reg_clkdiv;
>>>>> +
>>>>> +       cx24117_writereg(state, (state->demod == 0) ?
>>>>> +               CX24117_REG_CLKDIV0 : CX24117_REG_CLKDIV1, reg_clkdiv);
>>>>> +       cx24117_writereg(state, (state->demod == 0) ?
>>>>> +               CX24117_REG_RATEDIV0 : CX24117_REG_RATEDIV1, reg_ratediv);
>>>>> +
>>>>> +       cmd.args[15] = CX24117_PNE;
>>>>> +       cmd.len = 16;
>>>>> +
>>>>> +       do {
>>>>> +               /* Reset status register */
>>>>> +               status = cx24117_readreg(state, (state->demod == 0) ?
>>>>> +                       CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1) &
>>>>> +                       CX24117_SIGNAL_MASK;
>>>>> +
>>>>> +               dev_dbg(&state->priv->i2c->dev,
>>>>> +                       "%s() demod%d status_setfe = %02x\n",
>>>>> +                       __func__, state->demod, status);
>>>>> +
>>>>> +               cx24117_writereg(state, (state->demod == 0) ?
>>>>> +                       CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1,
>>>>> status);
>>>>> +
>>>>> +               /* Tune */
>>>>> +               ret = cx24117_cmd_execute(fe, &cmd);
>>>>> +               if (ret != 0)
>>>>> +                       break;
>>>>> +
>>>>> +               /*
>>>>> +                * Wait for up to 500 ms before retrying
>>>>> +                *
>>>>> +                * If we are able to tune then generally it occurs within
>>>>> 100ms.
>>>>> +                * If it takes longer, try a different rolloff setting.
>>>>> +                */
>>>>> +               for (i = 0; i < 50; i++) {
>>>>> +                       cx24117_read_status(fe, &tunerstat);
>>>>> +                       status = tunerstat & (FE_HAS_SIGNAL |
>>>>> FE_HAS_SYNC);
>>>>> +                       if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
>>>>> +                               dev_dbg(&state->priv->i2c->dev,
>>>>> +                                       "%s() demod%d tuned\n",
>>>>> +                                       __func__, state->demod);
>>>>> +                               return 0;
>>>>> +                       }
>>>>> +                       msleep(20);
>>>>> +               }
>>>>> +
>>>>> +               dev_dbg(&state->priv->i2c->dev, "%s() demod%d not
>>>>> tuned\n",
>>>>> +                       __func__, state->demod);
>>>>> +
>>>>> +               /* try next rolloff value */
>>>>> +               if (state->dcur.rolloff == 3)
>>>>> +                       cmd.args[11]--;
>>>>> +
>>>>> +       } while (--retune);
>>>>> +       return -EINVAL;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_tune(struct dvb_frontend *fe, bool re_tune,
>>>>> +       unsigned int mode_flags, unsigned int *delay, fe_status_t *status)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +
>>>>> +       dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n",
>>>>> +               __func__, state->demod);
>>>>> +
>>>>> +       *delay = HZ / 5;
>>>>> +       if (re_tune) {
>>>>> +               int ret = cx24117_set_frontend(fe);
>>>>> +               if (ret)
>>>>> +                       return ret;
>>>>> +       }
>>>>> +       return cx24117_read_status(fe, status);
>>>>> +}
>>>>> +
>>>>> +static int cx24117_get_algo(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       return DVBFE_ALGO_HW;
>>>>> +}
>>>>> +
>>>>> +static int cx24117_get_frontend(struct dvb_frontend *fe)
>>>>> +{
>>>>> +       struct cx24117_state *state = fe->demodulator_priv;
>>>>> +       struct dtv_frontend_properties *c = &fe->dtv_property_cache;
>>>>> +       struct cx24117_cmd cmd;
>>>>> +       u8 reg, st, inv;
>>>>> +       int ret, idx;
>>>>> +       unsigned int freq;
>>>>> +       short srate_os, freq_os;
>>>>> +
>>>>> +       u8 buf[0x1f-4];
>>>>> +
>>>>> +       cmd.args[0] = 0x1c;
>>>>> +       cmd.args[1] = (u8) state->demod;
>>>>> +       cmd.len = 2;
>>>>> +       ret = cx24117_cmd_execute(fe, &cmd);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       /* read all required regs at once */
>>>>> +       reg = (state->demod == 0) ? CX24117_REG_FREQ3_0 :
>>>>> CX24117_REG_FREQ3_1;
>>>>> +       ret = cx24117_readregN(state, reg, buf, 0x1f-4);
>>>>> +       if (ret != 0)
>>>>> +               return ret;
>>>>> +
>>>>> +       st = buf[5];
>>>>> +
>>>>> +       /* get spectral inversion */
>>>>> +       inv = (((state->demod == 0) ? ~st : st) >> 6) & 1;
>>>>> +       if (inv == 0)
>>>>> +               c->inversion = INVERSION_OFF;
>>>>> +       else
>>>>> +               c->inversion = INVERSION_ON;
>>>>> +
>>>>> +       /* modulation and fec */
>>>>> +       idx = st & 0x3f;
>>>>> +       if (c->delivery_system == SYS_DVBS2) {
>>>>> +               if (idx > 11)
>>>>> +                       idx += 9;
>>>>> +               else
>>>>> +                       idx += 7;
>>>>> +       }
>>>>> +
>>>>> +       c->modulation = cx24117_modfec_modes[idx].modulation;
>>>>> +       c->fec_inner = cx24117_modfec_modes[idx].fec;
>>>>> +
>>>>> +       /* frequency */
>>>>> +       freq = (buf[0] << 16) | (buf[1] << 8) | buf[2];
>>>>> +       freq_os = (buf[8] << 8) | buf[9];
>>>>> +       c->frequency = freq + freq_os;
>>>>> +
>>>>> +       /* symbol rate */
>>>>> +       srate_os = (buf[10] << 8) | buf[11];
>>>>> +       c->symbol_rate = -1000 * srate_os + state->dcur.symbol_rate;
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static struct dvb_frontend_ops cx24117_ops = {
>>>>> +       .delsys = { SYS_DVBS, SYS_DVBS2 },
>>>>> +       .info = {
>>>>> +               .name = "Conexant CX24117/CX24132",
>>>>> +               .frequency_min = 950000,
>>>>> +               .frequency_max = 2150000,
>>>>> +               .frequency_stepsize = 1011, /* kHz for QPSK frontends */
>>>>> +               .frequency_tolerance = 5000,
>>>>> +               .symbol_rate_min = 1000000,
>>>>> +               .symbol_rate_max = 45000000,
>>>>> +               .caps = FE_CAN_INVERSION_AUTO |
>>>>> +                       FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
>>>>> +                       FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
>>>>> +                       FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
>>>>> +                       FE_CAN_2G_MODULATION |
>>>>> +                       FE_CAN_QPSK | FE_CAN_RECOVER
>>>>> +       },
>>>>> +
>>>>> +       .release = cx24117_release,
>>>>> +
>>>>> +       .init = cx24117_initfe,
>>>>> +       .sleep = cx24117_sleep,
>>>>> +       .read_status = cx24117_read_status,
>>>>> +       .read_ber = cx24117_read_ber,
>>>>> +       .read_signal_strength = cx24117_read_signal_strength,
>>>>> +       .read_snr = cx24117_read_snr,
>>>>> +       .read_ucblocks = cx24117_read_ucblocks,
>>>>> +       .set_tone = cx24117_set_tone,
>>>>> +       .set_voltage = cx24117_set_voltage,
>>>>> +       .diseqc_send_master_cmd = cx24117_send_diseqc_msg,
>>>>> +       .diseqc_send_burst = cx24117_diseqc_send_burst,
>>>>> +       .get_frontend_algo = cx24117_get_algo,
>>>>> +       .tune = cx24117_tune,
>>>>> +
>>>>> +       .set_frontend = cx24117_set_frontend,
>>>>> +       .get_frontend = cx24117_get_frontend,
>>>>> +};
>>>>> +
>>>>> +
>>>>> +MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24117/cx24132
>>>>> hardware");
>>>>> +MODULE_AUTHOR("Luis Alves (ljalvs@xxxxxxxxx)");
>>>>> +MODULE_LICENSE("GPL");
>>>>> +MODULE_VERSION("1.1");
>>>>> +MODULE_FIRMWARE(CX24117_DEFAULT_FIRMWARE);
>>>>> +
>>>>> diff --git a/drivers/media/dvb-frontends/cx24117.h
>>>>> b/drivers/media/dvb-frontends/cx24117.h
>>>>> new file mode 100644
>>>>> index 0000000..5bc8f11
>>>>> --- /dev/null
>>>>> +++ b/drivers/media/dvb-frontends/cx24117.h
>>>>> @@ -0,0 +1,47 @@
>>>>> +/*
>>>>> +    Conexant cx24117/cx24132 - Dual DVBS/S2 Satellite demod/tuner driver
>>>>> +
>>>>> +    Copyright (C) 2013 Luis Alves <ljalvs@xxxxxxxxx>
>>>>> +       (based on cx24116.h by Steven Toth)
>>>>> +
>>>>> +    This program is free software; you can redistribute it and/or modify
>>>>> +    it under the terms of the GNU General Public License as published by
>>>>> +    the Free Software Foundation; either version 2 of the License, or
>>>>> +    (at your option) any later version.
>>>>> +
>>>>> +    This program is distributed in the hope that it will be useful,
>>>>> +    but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>> +    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>>> +    GNU General Public License for more details.
>>>>> +
>>>>> +    You should have received a copy of the GNU General Public License
>>>>> +    along with this program; if not, write to the Free Software
>>>>> +    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>>>> +*/
>>>>> +
>>>>> +#ifndef CX24117_H
>>>>> +#define CX24117_H
>>>>> +
>>>>> +#include <linux/kconfig.h>
>>>>> +#include <linux/dvb/frontend.h>
>>>>> +
>>>>> +struct cx24117_config {
>>>>> +       /* the demodulator's i2c address */
>>>>> +       u8 demod_address;
>>>>> +};
>>>>> +
>>>>> +#if IS_ENABLED(CONFIG_DVB_CX24117)
>>>>> +extern struct dvb_frontend *cx24117_attach(
>>>>> +       const struct cx24117_config *config,
>>>>> +       struct i2c_adapter *i2c, struct dvb_frontend *fe);
>>>>> +#else
>>>>> +static inline struct dvb_frontend *cx24117_attach(
>>>>> +       const struct cx24117_config *config,
>>>>> +       struct i2c_adapter *i2c, struct dvb_frontend *fe)
>>>>> +{
>>>>> +       dev_warn(&i2c->dev, "%s: driver disabled by Kconfig\n", __func__);
>>>>> +       return NULL;
>>>>> +}
>>>>> +#endif
>>>>> +
>>>>> +#endif /* CX24117_H */
>>>>>
>>>>
>>>>
>>>> --
>>>> http://palosaari.fi/
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>> (Apologies if you may have received this twice - I'm not sure if the
>>> first one went through)
>>>
>>> Luis,
>>>
>>> I have your patches queued in the 'cx24117' branch of my dvb.git tree:
>>>
>>> git://linuxtv.org/mkrufky/dvb cx24117
>>>
>>> It feels a bit strange to me that we are passing a struct dvb_frontend
>>> * into cx24117_attach() ...  Looking at the code, my understanding is
>>> that multiple cx24117's share some data between their driver
>>> instances?  Could you explain a bit more about the need for doing
>>> this?
>>>
>>> If you should decide to send in additional patches, please feel free
>>> to send changes in against this cx24117 branch until we merge it into
>>> master.
>>>
>>> Cheers,
>>>
>>> Mike Krufky
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> Luis,
>
> OK, makes sense.  Please take a look at the
> "hybrid_tuner_request_state()" api located in
> drivers/media/tuners/tuner-i2c.h
>
> For a good example of how to use this API in such a situation as a
> demodulator, take a look at
> drivers/media/dvb-frontends/au8522_common.c
>
> Don't let the "hybrid_tuner_" prefix to the API prevent you from using
> it to share state on a digital demodulator - it can definitely be used
> for this purpose.
>
> Again, don't regenerate the patchset - just send patches against the
> cx24117 branch that I created.
>
> Let me know if you have any questions.
>
> Best regards,
>
> Mike Krufky
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux