Hello The firmware got fixed, the module option, needs a file-name only, no path , lol for once Well, the driver says Firmware OK , I have seen the message of Mauro, he must be right a hundred percent, 'cause we seem to have the initialisations ok, but , for me at lease no data coming out from the tuner ... and it has GPIOs , that have to be used accordinly ... No data meaning no reaction, and no tuning . Otherwise I think we have video from the tuner ( snow ! ) and composite ( parasites ) I will as soon as i can, take macro photos heads/tails , and draw a schematic With the datasheets i have (all ;) ) I will find out the GPIOs where they are going ... :) will keep you all informed of course . Best regards Rémi ### cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 4.392762] tuner 1-0061: Tuner -1 found with type(s) Radio TV. [ 4.395040] xc2028 1-0061: creating new instance [ 4.395043] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 4.395214] cx23885[0]: registered device video1 [v4l2] [ 4.395333] cx23885[0]: registered device vbi0 [ 4.395519] cx23885[0]: registered ALSA audio device [ 4.395870] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 4.598038] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 5.762199] xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700. [ 5.777471] SCODE (20000000), id 000000000000b700: [ 5.777474] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 5.923492] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 5.923499] cx23885[0]/0: found at 0000:05:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xd3000000 #### > Le 18 septembre 2013 à 16:44, Anca Emanuel <anca.emanuel@xxxxxxxxx> a écrit : > > > On Tue, Aug 20, 2013 at 5:44 PM, remi <remi@xxxxxxxx> wrote: > > Hello > > > > FYI > > > > I digged into the firmware problem a little, > > > > > > xc3028L-v36.fw gets loaded by default , and the errors are as you saw earlier > > > > > > forcing the /lib/firmware/xc3028-v27.fw : > > > > [ 3569.941404] xc2028 2-0061: Could not load firmware > > /lib/firmware/xc3028-v27.fw > > > > > > So i searched the original dell/windows driver : > > > > > > I have these files in there : > > > > root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070# ls -lR > > .: > > total 5468 > > drwxr-xr-x 2 gpunk gpunk 4096 août 20 13:24 Driver_X86 > > -rwxr-xr-x 1 gpunk gpunk 5589827 sept. 12 2007 Setup.exe > > -rw-r--r-- 1 gpunk gpunk 197 oct. 9 2007 setup.iss > > > > ./Driver_X86: > > total 1448 > > -rw-r--r-- 1 gpunk gpunk 114338 sept. 7 2007 A885VCap_ASUS_DELL_2.inf > > -rw-r--r-- 1 gpunk gpunk 15850 sept. 11 2007 a885vcap.cat > > -rw-r--r-- 1 gpunk gpunk 733824 sept. 7 2007 A885VCap.sys > > -rw-r--r-- 1 gpunk gpunk 147870 avril 20 2007 cpnotify.ax > > -rw-r--r-- 1 gpunk gpunk 376836 avril 20 2007 cx416enc.rom > > -rw-r--r-- 1 gpunk gpunk 65536 avril 20 2007 cxtvrate.dll > > -rw-r--r-- 1 gpunk gpunk 16382 avril 20 2007 merlinC.rom > > I think merlinC.rom is your xc3028-v27.fw > > Compare it to http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028 > the file extracted there. > > > root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070# > > > > root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070/Driver_X86# grep > > firmware * > > Fichier binaire A885VCap.sys concordant > > root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070/Driver_X86# > > > > > > > > I'll try to find a way to extract "maybe" the right firmware for what this card > > , > > > > I'd love some help :) > > Mauro replied this > http://www.spinics.net/lists/linux-media/msg25746.html to me in 2010. > > Then I removed the card from my PC. > > Some years later I tried again. This time I found this patch to give > me some hints: http://www.spinics.net/lists/linux-media/msg43069.html > After compiling several versions of the patch for the upstream kernel > (try and hope type) I posted what works for me. > > Tutorial to make kernel patches: http://www.youtube.com/watch?v=LLBrBBImJt4 > Tutorial to set git send-email correctly for git: https://coderwall.com/p/dp-gka > Tip for first kernel patch: send to your address first to spot any errors. > Tip for linux-media patchwork to automatically get yours: use labels > (search for discussion about this). > > I hope this helps. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html