Hello FYI I digged into the firmware problem a little, xc3028L-v36.fw gets loaded by default , and the errors are as you saw earlier forcing the /lib/firmware/xc3028-v27.fw : [ 3569.941404] xc2028 2-0061: Could not load firmware /lib/firmware/xc3028-v27.fw So i searched the original dell/windows driver : I have these files in there : root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070# ls -lR .: total 5468 drwxr-xr-x 2 gpunk gpunk 4096 août 20 13:24 Driver_X86 -rwxr-xr-x 1 gpunk gpunk 5589827 sept. 12 2007 Setup.exe -rw-r--r-- 1 gpunk gpunk 197 oct. 9 2007 setup.iss ./Driver_X86: total 1448 -rw-r--r-- 1 gpunk gpunk 114338 sept. 7 2007 A885VCap_ASUS_DELL_2.inf -rw-r--r-- 1 gpunk gpunk 15850 sept. 11 2007 a885vcap.cat -rw-r--r-- 1 gpunk gpunk 733824 sept. 7 2007 A885VCap.sys -rw-r--r-- 1 gpunk gpunk 147870 avril 20 2007 cpnotify.ax -rw-r--r-- 1 gpunk gpunk 376836 avril 20 2007 cx416enc.rom -rw-r--r-- 1 gpunk gpunk 65536 avril 20 2007 cxtvrate.dll -rw-r--r-- 1 gpunk gpunk 16382 avril 20 2007 merlinC.rom root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070# root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070/Driver_X86# grep firmware * Fichier binaire A885VCap.sys concordant root@medeb:/home/gpunk/.wine/drive_c/dell/drivers/R169070/Driver_X86# I'll try to find a way to extract "maybe" the right firmware for what this card , I'd love some help :) Good news there are ALOT of infos on how to initialize the card in the .INF , so many problems, i think, are partially solved (I need to implement them ) I'll send a copy of theses to anyone who wishes, Or see http://www.dell.com/support/drivers/us/en/04/DriverDetails?driverId=R169070 ; :) Regards Rémi > Le 20 août 2013 à 12:32, remi <remi@xxxxxxxx> a écrit : > > > Hello > > I have just putdown my screwdrivers :) > > > Yes it was three ICs > > > on the bottom-side , no heatsinks (digital reception, that's why i guess) , is > an AF9013-N1 > > on the top-side, with a heatsink : CX23885-13Z , PCIe A/V controler > > on the top-side, with heat-sink + "radio-isolation" (aluminum box) XC3028ACQ , > so the analog reception . > > > Its all on a PCIe bus, the reason why i baught it ... :) > > > > To resume : > > > AF9013-N1 > > CX23885-13Z > > XC3028ACQ > > > the drivers while scanning > > > gpunk@medeb:~/Bureau$ dmesg |grep i2c > [ 2.363784] cx23885[0]: i2c scan: found device @ 0xa0 [eeprom] > [ 2.384721] cx23885[0]: i2c scan: found device @ 0xc2 > [tuner/mt2131/tda8275/xc5000/xc3028] > [ 2.391502] cx23885[0]: i2c scan: found device @ 0x66 [???] > [ 2.392339] cx23885[0]: i2c scan: found device @ 0x88 [cx25837] > [ 2.392831] cx23885[0]: i2c scan: found device @ 0x98 [flatiron] > [ 5.306751] i2c /dev entries driver > gpunk@medeb:~/Bureau$ > > > 4.560428] xc2028 2-0061: xc2028_get_reg 0008 called > [ 4.560989] xc2028 2-0061: Device is Xceive 0 version 0.0, firmware version > 0.0 > [ 4.560990] xc2028 2-0061: Incorrect readback of firmware version. > [ * 4.561184] xc2028 2-0061: Read invalid device hardware information - > tuner > hung? > [ * 4.561386] xc2028 2-0061: 0.0 0.0 > [ * 4.674072] xc2028 2-0061: divisor= 00 00 64 00 (freq=400.000) > [ 4.697830] cx23885_dev_checkrevision() Hardware revision = 0xb0 > [ 4.698029] cx23885[0]/0: found at 0000:05:00.0, rev: 2, irq: 18, latency: > 0, > mmio: 0xd3000000 > > * --> I bypassed the "goto fail" to start debugging a little bit the > tuner-xc2028.c/ko ... lines 869 > ... > > > > The firmware doesnt get all loaded . > gpunk@medeb:~/Bureau$ uname -a > Linux medeb 3.11.0-rc6remi #1 SMP PREEMPT Mon Aug 19 13:30:04 CEST 2013 i686 > GNU/Linux > gpunk@medeb:~/Bureau$ > > > With yesterday's tarball from linuxtv.org / media-build git . > > > > Best regards > > Rémi > > > > > > Le 19 août 2013 à 17:18, Antti Palosaari <crope@xxxxxx> a écrit : > > > > > > On 08/19/2013 05:18 PM, remi wrote: > > > Hello > > > > > > I have this card since months, > > > > > > http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=376&SI=true > > > > > > I have finally retested it with the cx23885 driver : card=39 > > > > > > > > > > > > If I could do anything to identify : [ 2.414734] cx23885[0]: i2c scan: > > > found > > > device @ 0x66 [???] > > > > > > Or "hookup" the xc5000 etc > > > > > > I'll be more than glad . > > > > > > > > > > > > > ps: i opened it up a while ago,i saw an af9013 chip ? dvb-tuner looks like > > > maybe the "device @ 0x66 i2c" > > > > > > I will double check , and re-write-down all the chips , i think 3 . > > > > You have to identify all the chips, for DVB-T there is tuner missing. > > > > USB-interface: cx23885 > > DVB-T demodulator: AF9013 > > RF-tuner: ? > > > > If there is existing driver for used RF-tuner it comes nice hacking > > project for some newcomer. > > > > It is just tweaking and hacking to find out all settings. AF9013 driver > > also needs likely some changes, currently it is used only for devices > > having AF9015 with integrated AF9013, or AF9015 dual devices having > > AF9015 + external AF9013 providing second tuner. > > > > I have bought quite similar AverMedia A301 ages back as I was looking > > for that AF9013 model, but maybe I have bought just wrong one... :) > > > > > > regards > > Antti > > > > > > -- > > http://palosaari.fi/ > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html