Re: [RFC V2 1/3] [smi2021] Add gm7113c chip to the saa7115 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 25, 2013 at 05:36:29PM -0300, Mauro Carvalho Chehab wrote:
> Em Thu, 25 Apr 2013 17:13:28 -0300
> Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> escreveu:
> 
> > Em Thu, 25 Apr 2013 21:10:18 +0200
> > Jon Arne Jørgensen <jonarne@xxxxxxxxxx> escreveu:
> > 
> > > The somagic device uses the gm7113c chip to digitize analog video,
> > > this is a clone of the saa7113 chip.
> > > 
> > > The gm7113c can't be identified over i2c, so I can't rely on
> > > saa7115 autodetection.
> > > 
> > > Signed-off-by: Jon Arne Jørgensen <jonarne@xxxxxxxxxx>
> > > ---
> > >  drivers/media/i2c/saa7115.c     | 61 ++++++++++++++++++++++++++++++++++-------
> > >  include/media/v4l2-chip-ident.h |  3 ++
> > >  2 files changed, 54 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> > > index 6b6788c..e93b50a 100644
> > > --- a/drivers/media/i2c/saa7115.c
> > > +++ b/drivers/media/i2c/saa7115.c
> > > @@ -54,7 +54,7 @@
> > >  
> > >  MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
> > >  MODULE_AUTHOR(  "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
> > > -		"Hans Verkuil, Mauro Carvalho Chehab");
> > > +		"Hans Verkuil, Mauro Carvalho Chehab, Jon Arne Jørgensen");
> > 
> > Hi Jon,
> > 
> > I was told once by Greg KH that the minimal number of changes to be one
> > of the driver's authors is to change a significant amount of the code
> > (like 20% or more).
> > 
> > So, I prefer if you don't change it there.
> > 
> > >  MODULE_LICENSE("GPL");
> > >  
> > >  static bool debug;
> > > @@ -126,6 +126,7 @@ static int saa711x_has_reg(const int id, const u8 reg)
> > >  		return 0;
> > >  
> > >  	switch (id) {
> > > +	case V4L2_IDENT_GM7113C:
> > >  	case V4L2_IDENT_SAA7113:
> > >  		return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
> > >  		       reg != 0x5d && reg < 0x63;
> > > @@ -292,7 +293,7 @@ static const unsigned char saa7115_cfg_reset_scaler[] = {
> > >  	0x00, 0x00
> > >  };
> > >  
> > > -/* ============== SAA7715 VIDEO templates =============  */
> > > +/* ============== SAA7115 VIDEO templates =============  */
> > >  
> > >  static const unsigned char saa7115_cfg_60hz_video[] = {
> > >  	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
> > > @@ -445,7 +446,27 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
> > >  	0x00, 0x00
> > >  };
> > >  
> > > -/* ============== SAA7715 VIDEO templates (end) =======  */
> > > +/* ============== SAA7115 VIDEO templates (end) =======  */
> > > +
> > > +/* ============== GM7113C VIDEO templates =============  */
> > > +
> > > +static const unsigned char gm7113c_cfg_60hz_video[] = {
> > > +	R_08_SYNC_CNTL, 0x68,			/* 0xBO: auto detection, 0x68 = NTSC */
> > > +	R_0E_CHROMA_CNTL_1, 0x07,		/* video autodetection is on */
> > > +
> > > +	R_5A_V_OFF_FOR_SLICER, 0x06,		/* standard 60hz value for ITU656 line counting */
> > > +	0x00, 0x00
> > > +};
> > > +
> > > +static const unsigned char gm7113c_cfg_50hz_video[] = {
> > > +	R_08_SYNC_CNTL, 0x28,			/* 0x28 = PAL */
> > > +	R_0E_CHROMA_CNTL_1, 0x07,
> > > +
> > > +	R_5A_V_OFF_FOR_SLICER, 0x03,		/* standard 50hz value */
> > > +	0x00, 0x00
> > > +};
> > > +
> > > +/* ============== GM7113C VIDEO templates (end) =======  */
> > >  
> > >  static const unsigned char saa7115_cfg_vbi_on[] = {
> > >  	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
> > > @@ -927,11 +948,17 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
> > >  	// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
> > >  	if (std & V4L2_STD_525_60) {
> > >  		v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
> > > -		saa711x_writeregs(sd, saa7115_cfg_60hz_video);
> > > +		if (state->ident == V4L2_IDENT_GM7113C)
> > > +			saa711x_writeregs(sd, gm7113c_cfg_60hz_video);
> > > +		else
> > > +			saa711x_writeregs(sd, saa7115_cfg_60hz_video);
> > >  		saa711x_set_size(sd, 720, 480);
> > >  	} else {
> > >  		v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
> > > -		saa711x_writeregs(sd, saa7115_cfg_50hz_video);
> > > +		if (state->ident == V4L2_IDENT_GM7113C)
> > > +			saa711x_writeregs(sd, gm7113c_cfg_50hz_video);
> > > +		else
> > > +			saa711x_writeregs(sd, saa7115_cfg_50hz_video);
> > >  		saa711x_set_size(sd, 720, 576);
> > >  	}
> > >  
> > > @@ -944,7 +971,8 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
> > >  	011 NTSC N (3.58MHz)            PAL M (3.58MHz)
> > >  	100 reserved                    NTSC-Japan (3.58MHz)
> > >  	*/
> > > -	if (state->ident <= V4L2_IDENT_SAA7113) {
> > > +	if (state->ident <= V4L2_IDENT_SAA7113 ||
> > > +	    state->ident == V4L2_IDENT_GM7113C) {
> > >  		u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f;
> > >  
> > >  		if (std == V4L2_STD_PAL_M) {
> > > @@ -1215,7 +1243,8 @@ static int saa711x_s_routing(struct v4l2_subdev *sd,
> > >  		input, output);
> > >  
> > >  	/* saa7111/3 does not have these inputs */
> > > -	if (state->ident <= V4L2_IDENT_SAA7113 &&
> > > +	if ((state->ident <= V4L2_IDENT_SAA7113 ||
> > > +	     state->ident == V4L2_IDENT_GM7113C) &&
> > >  	    (input == SAA7115_COMPOSITE4 ||
> > >  	     input == SAA7115_COMPOSITE5)) {
> > >  		return -EINVAL;
> > > @@ -1586,8 +1615,11 @@ static int  i2c_client *client,
> > >  
> > >  	chip_id = name[5];
> > >  
> > > +
> > >  	/* Check whether this chip is part of the saa711x series */
> > > -	if (memcmp(name + 1, "f711", 4)) {
> > > +	if (memcmp(id->name + 1, "gm7113c", 7)) {
> > > +		chip_id = 'c';
> > 
> > There are several issues on the above:
> > 1) "id" may be NULL on autodetect mode;
> > 
> > 2) Why are you adding 1 here?
> >    It should be, instead id->name
> > 
> > 3) memcmp returns 0 if matches. So, the test is wrong.
> >    So, It should be instead:
> > 	if (!memcmp(id->name, "gm7113c", 7)) {
> > 
> > 4) Also, while that works, it seems a little hackish...
> > 
> > > +	} else if (memcmp(name + 1, "f711", 4)) {
> > >  		v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n",
> > >  			client->addr << 1, name);
> > >  		return -ENODEV;
> > > @@ -1598,8 +1630,12 @@ static int saa711x_probe(struct i2c_client *client,
> > >  		v4l_warn(client, "found saa711%c while %s was expected\n",
> > >  			 chip_id, id->name);
> > >  	}
> > > -	snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
> > > -	v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name,
> > > +	if (chip_id == 'c')
> > 
> > especially by needing to add a weird if here.
> > See more below:
> > 
> > > +		snprintf(client->name, sizeof(client->name), "%s", id->name);
> > > +	else
> > > +		snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
> > > +
> > > +	v4l_info(client, "%s found (%s) @ 0x%x (%s)\n", client->name, name,
> > >  		 client->addr << 1, client->adapter->name);
> > >  
> > >  	state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
> > > @@ -1645,6 +1681,9 @@ static int saa711x_probe(struct i2c_client *client,
> > >  			state->ident = V4L2_IDENT_SAA7111A;
> > >  		}
> > >  		break;
> > > +	case 'c':
> > > +		state->ident = V4L2_IDENT_GM7113C;
> > > +		break;
> > 
> > The better would be to initialize state->ident earlier, together with memcmp.
> > 
> > Even better: please move the detection code into a separate
> > routine that would internally fill state->ident and client->name
> > and do what's needed to detect the chip.
> > 
> > That would be cleaner and will reduce a little bit the complexity
> > inside saa711x_probe.
> > 
> > Something like:
> > 
> > static int saa711x_detect_chip(struct i2c_client *client,
> > 			       struct saa711x_state *state,
> > 			       const struct i2c_device_id *id)
> > {
> > 	int i;
> > 	char chip_id, name[16];
> > 
> > 	/*
> > 	 * Check for gm7113c (a saa7113 clone). Currently, there's no
> > 	 * known way to autodetect it, so boards that use will need to
> > 	 * explicitly fill the id->name field.
> > 	 */
> > 	if (id && !memcmp(id->name, "gm7113c", 7)) {
> > 		state->ident = V4L2_IDENT_GM7113C;
> > 		snprintf(client->name, sizeof(client->name), "%s", id->name);
> > 		return 0;
> > 	}
> 
> 
> Btw, not sure if you also googled for it, but there's a datasheet for this chip
> at:
> 	http://www.gotecom.com/up_files/download/64200700.pdf
> 
> >From what's there, there are 2 versions of this chip (no, I don't read
> chinese, but Google translator also helps with this[1]). 
> 
> [1] http://translate.google.com.br/translate?sl=zh-CN&tl=en&u=http%3A%2F%2Fwww.gotecom.com%2Fup_files%2Fdownload%2F64200700.pdf
>

I've googled, but gave up when I got chinese. Didn't know google
translate could handle it.
 
> 5.2 I2C bus register details
> 5.2.1 Address 00H
> 
> Table 14 chip version (address 00H)
> 	Function	Logic value
> 			ID07  ID07  ID07  ID07  ID07  ID07  ID07  ID07
> 	Chip Version V1  0     0     0     1     X     X     X     X
> 		     V2  0     0     1     0     X     X     X     X
> 
> So, I think you should do something like:
> 
> 	chip_ver = 0;
> 	for (i = 0; i < 4; i++) {
> 		chip_ver = chip_ver << 1;
>  		i2c_smbus_write_byte_data(client, 0, i);
>  		chip_ver |= (i2c_smbus_read_byte_data(client, 0) & 0x80) ? 1 : 0;
>  	}
> 
> and fill client-name with the version also, like:
> 
> 	snprintf(client->name, sizeof(client->name), "%s-%d", id->name, chip_ver);
> 
> As it may be important latter to handle the different versions, and/or
> better handle bug reports related to some specific version of this chip.
> 

This is great, I will implement these checks for the device.

> > 	/* Check for Philips/NXP original chips */
> > 	for (i = 0; i < sizeof(name); i++) {
> > 		i2c_smbus_write_byte_data(client, 0, i);
> > 		name[i] = (i2c_smbus_read_byte_data(client, 0) & 0x0f) + '0';
> > 		if (name[i] > '9')
> > 			name[i] += 'a' - '9' - 1;
> > 	}
> > 	name[i] = '\0';
> > 
> > 	if (memcmp(name + 1, "f711", 4))
> > 		return -ENODEV;
> > 
> > 	chip_id = name[5];
> > 
> > 	snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
> > 
> > 	/*
> > 	 * Put here the code that fills state->ident for Philips/NXP chips
> > 	 */
> > ...
> > 
> > 	return 0;
> > }
> > 
> > >  	case '3':
> > >  		state->ident = V4L2_IDENT_SAA7113;
> > >  		break;
> > > @@ -1675,6 +1714,7 @@ static int saa711x_probe(struct i2c_client *client,
> > >  		saa711x_writeregs(sd, saa7111_init);
> > >  		break;
> > >  	case V4L2_IDENT_SAA7113:
> > > +	case V4L2_IDENT_GM7113C:
> > >  		saa711x_writeregs(sd, saa7113_init);
> > >  		break;
> > >  	default:
> > > @@ -1711,6 +1751,7 @@ static const struct i2c_device_id saa711x_id[] = {
> > >  	{ "saa7114", 0 },
> > >  	{ "saa7115", 0 },
> > >  	{ "saa7118", 0 },
> > > +	{ "gm7113c", 0 },
> > >  	{ }
> > >  };
> > >  MODULE_DEVICE_TABLE(i2c, saa711x_id);
> > > diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
> > > index 4ee125b..fc13d53 100644
> > > --- a/include/media/v4l2-chip-ident.h
> > > +++ b/include/media/v4l2-chip-ident.h
> > > @@ -51,6 +51,9 @@ enum {
> > >  	V4L2_IDENT_SAA7114 = 104,
> > >  	V4L2_IDENT_SAA7115 = 105,
> > >  	V4L2_IDENT_SAA7118 = 108,
> > > +	/* This chip is a chinese clone of the saa7113 chip,
> > > +	 * with some minor changes/bugs */
> > > +	V4L2_IDENT_GM7113C = 149,
> > >  
> > >  	/* module saa7127: reserved range 150-199 */
> > >  	V4L2_IDENT_SAA7127 = 157,
> > 
> > 
> 
> 
> -- 
> 
> Cheers,
> Mauro
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux