The somagic device uses the gm7113c chip to digitize analog video,
this is a clone of the saa7113 chip.
The gm7113c can't be identified over i2c, so I can't rely on
saa7115 autodetection.
Signed-off-by: Jon Arne Jørgensen <jonarne@xxxxxxxxxx>
---
drivers/media/i2c/saa7115.c | 61 ++++++++++++++++++++++++++++++++++-------
include/media/v4l2-chip-ident.h | 3 ++
2 files changed, 54 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 6b6788c..e93b50a 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -54,7 +54,7 @@
MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
- "Hans Verkuil, Mauro Carvalho Chehab");
+ "Hans Verkuil, Mauro Carvalho Chehab, Jon Arne Jørgensen");
MODULE_LICENSE("GPL");
static bool debug;
@@ -126,6 +126,7 @@ static int saa711x_has_reg(const int id, const u8 reg)
return 0;
switch (id) {
+ case V4L2_IDENT_GM7113C:
case V4L2_IDENT_SAA7113:
return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
reg != 0x5d && reg < 0x63;
@@ -292,7 +293,7 @@ static const unsigned char saa7115_cfg_reset_scaler[] = {
0x00, 0x00
};
-/* ============== SAA7715 VIDEO templates ============= */
+/* ============== SAA7115 VIDEO templates ============= */
static const unsigned char saa7115_cfg_60hz_video[] = {
R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */
@@ -445,7 +446,27 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
0x00, 0x00
};
-/* ============== SAA7715 VIDEO templates (end) ======= */
+/* ============== SAA7115 VIDEO templates (end) ======= */
+
+/* ============== GM7113C VIDEO templates ============= */
+
+static const unsigned char gm7113c_cfg_60hz_video[] = {
+ R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */
+ R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */
+
+ R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */
+ 0x00, 0x00
+};
+
+static const unsigned char gm7113c_cfg_50hz_video[] = {
+ R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */
+ R_0E_CHROMA_CNTL_1, 0x07,
+
+ R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */
+ 0x00, 0x00
+};
+
+/* ============== GM7113C VIDEO templates (end) ======= */
static const unsigned char saa7115_cfg_vbi_on[] = {
R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */
@@ -927,11 +948,17 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
if (std & V4L2_STD_525_60) {
v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
- saa711x_writeregs(sd, saa7115_cfg_60hz_video);
+ if (state->ident == V4L2_IDENT_GM7113C)
+ saa711x_writeregs(sd, gm7113c_cfg_60hz_video);
+ else
+ saa711x_writeregs(sd, saa7115_cfg_60hz_video);
saa711x_set_size(sd, 720, 480);
} else {
v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
- saa711x_writeregs(sd, saa7115_cfg_50hz_video);
+ if (state->ident == V4L2_IDENT_GM7113C)
+ saa711x_writeregs(sd, gm7113c_cfg_50hz_video);
+ else
+ saa711x_writeregs(sd, saa7115_cfg_50hz_video);
saa711x_set_size(sd, 720, 576);
}
@@ -944,7 +971,8 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
011 NTSC N (3.58MHz) PAL M (3.58MHz)
100 reserved NTSC-Japan (3.58MHz)
*/
- if (state->ident <= V4L2_IDENT_SAA7113) {
+ if (state->ident <= V4L2_IDENT_SAA7113 ||
+ state->ident == V4L2_IDENT_GM7113C) {
u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f;
if (std == V4L2_STD_PAL_M) {
@@ -1215,7 +1243,8 @@ static int saa711x_s_routing(struct v4l2_subdev *sd,
input, output);
/* saa7111/3 does not have these inputs */
- if (state->ident <= V4L2_IDENT_SAA7113 &&
+ if ((state->ident <= V4L2_IDENT_SAA7113 ||
+ state->ident == V4L2_IDENT_GM7113C) &&
(input == SAA7115_COMPOSITE4 ||
input == SAA7115_COMPOSITE5)) {
return -EINVAL;
@@ -1586,8 +1615,11 @@ static int saa711x_probe(struct i2c_client *client,
chip_id = name[5];
+
/* Check whether this chip is part of the saa711x series */
- if (memcmp(name + 1, "f711", 4)) {
+ if (memcmp(id->name + 1, "gm7113c", 7)) {
+ chip_id = 'c';
+ } else if (memcmp(name + 1, "f711", 4)) {
v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n",
client->addr << 1, name);
return -ENODEV;
@@ -1598,8 +1630,12 @@ static int saa711x_probe(struct i2c_client *client,
v4l_warn(client, "found saa711%c while %s was expected\n",
chip_id, id->name);
}
- snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
- v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name,
+ if (chip_id == 'c')
+ snprintf(client->name, sizeof(client->name), "%s", id->name);
+ else
+ snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
+
+ v4l_info(client, "%s found (%s) @ 0x%x (%s)\n", client->name, name,
client->addr << 1, client->adapter->name);
state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
@@ -1645,6 +1681,9 @@ static int saa711x_probe(struct i2c_client *client,
state->ident = V4L2_IDENT_SAA7111A;
}
break;
+ case 'c':
+ state->ident = V4L2_IDENT_GM7113C;
+ break;
case '3':
state->ident = V4L2_IDENT_SAA7113;
break;
@@ -1675,6 +1714,7 @@ static int saa711x_probe(struct i2c_client *client,
saa711x_writeregs(sd, saa7111_init);
break;
case V4L2_IDENT_SAA7113:
+ case V4L2_IDENT_GM7113C:
saa711x_writeregs(sd, saa7113_init);
break;
default:
@@ -1711,6 +1751,7 @@ static const struct i2c_device_id saa711x_id[] = {
{ "saa7114", 0 },
{ "saa7115", 0 },
{ "saa7118", 0 },
+ { "gm7113c", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, saa711x_id);
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 4ee125b..fc13d53 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -51,6 +51,9 @@ enum {
V4L2_IDENT_SAA7114 = 104,
V4L2_IDENT_SAA7115 = 105,
V4L2_IDENT_SAA7118 = 108,
+ /* This chip is a chinese clone of the saa7113 chip,
+ * with some minor changes/bugs */
+ V4L2_IDENT_GM7113C = 149,
/* module saa7127: reserved range 150-199 */
V4L2_IDENT_SAA7127 = 157,
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
