On 03/11/2013 10:02 PM, Jose Alberto Reguero wrote:
On Lunes, 11 de marzo de 2013 14:57:37 Antti Palosaari escribió:
On 03/11/2013 01:51 PM, Jose Alberto Reguero wrote:
On Lunes, 11 de febrero de 2013 14:48:18 Jose Alberto Reguero escribió:
On Domingo, 10 de febrero de 2013 22:11:53 Antti Palosaari escribió:
On 02/10/2013 09:43 PM, Jose Alberto Reguero wrote:
This patch block the i2c tuner reads for Avermedia Twinstar. If it's
needed other pids can be added.
Signed-off-by: Jose Alberto Reguero <jareguero@xxxxxxxxxxxxxx>
diff -upr linux/drivers/media/usb/dvb-usb-v2/af9035.c
linux.new/drivers/media/usb/dvb-usb-v2/af9035.c ---
linux/drivers/media/usb/dvb-usb-v2/af9035.c 2013-01-07
05:45:57.000000000 +0100 +++
linux.new/drivers/media/usb/dvb-usb-v2/af9035.c 2013-02-08
22:55:08.304089054 +0100 @@ -232,7 +232,11 @@ static int
af9035_i2c_master_xfer(struct
buf[3] = 0x00; /* reg addr MSB */
buf[4] = 0x00; /* reg addr LSB */
memcpy(&buf[5], msg[0].buf, msg[0].len);
- ret = af9035_ctrl_msg(d, &req);
+ if (state->block_read) {
+ msg[1].buf[0] = 0x3f;
+ ret = 0;
+ } else
+ ret = af9035_ctrl_msg(d, &req);
}
} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
if (msg[0].len > 40) {
@@ -638,6 +642,17 @@ static int af9035_read_config(struct dvb
for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++)
state->af9033_config[i].clock = clock_lut[tmp];
+ state->block_read = false;
+
+ if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
+ le16_to_cpu(d->udev->descriptor.idProduct) ==
+ USB_PID_AVERMEDIA_TWINSTAR) {
+ dev_dbg(&d->udev->dev,
+ "%s: AverMedia Twinstar: block i2c read from tuner\n",
+ __func__);
+ state->block_read = true;
+ }
+
return 0;
err:
diff -upr linux/drivers/media/usb/dvb-usb-v2/af9035.h
linux.new/drivers/media/usb/dvb-usb-v2/af9035.h ---
linux/drivers/media/usb/dvb-usb-v2/af9035.h 2013-01-07
05:45:57.000000000 +0100 +++
linux.new/drivers/media/usb/dvb-usb-v2/af9035.h 2013-02-08
22:52:42.293842710 +0100 @@ -54,6 +54,7 @@ struct usb_req {
struct state {
u8 seq; /* packet sequence number */
bool dual_mode;
+ bool block_read;
struct af9033_config af9033_config[2];
};
Could you test if faking tuner ID during attach() is enough?
Also, I would like to know what is returned error code from firmware
when it fails. Enable debugs to see it. It should print something like
that: af9035_ctrl_msg: command=03 failed fw error=2
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c
b/drivers/media/usb/dvb-usb-v2/af9035.c
index a1e953a..5a4f28d 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -1082,9 +1082,22 @@ static int af9035_tuner_attach(struct
dvb_usb_adapter *adap)
tuner_addr = 0x60 | 0x80; /* I2C bus hack */
}
+ // fake used tuner for demod firmware / i2c adapter
+ if (adap->id == 0)
+ ret = af9035_wr_reg(d, 0x00f641,
AF9033_TUNER_FC0011);
+ else
+ ret = af9035_wr_reg(d, 0x10f641,
AF9033_TUNER_FC0011);
+
/* attach tuner */
fe = dvb_attach(mxl5007t_attach, adap->fe[0],
&d->i2c_adap,
tuner_addr,
&af9035_mxl5007t_config[adap->id]);
+
+ // return correct tuner
+ if (adap->id == 0)
+ ret = af9035_wr_reg(d, 0x00f641,
AF9033_TUNER_MXL5007T);
+ else
+ ret = af9035_wr_reg(d, 0x10f641,
AF9033_TUNER_MXL5007T);
+
break;
case AF9033_TUNER_TDA18218:
/* attach tuner */
regards
Antti
I will try with fake tuner, but I can't test unil next weekend.
If I remember, the read operation is performed, and return good value,
but after that, all the i2c transfers fail. Seee:
http://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg56346.html
Jose Alberto
I tried with fake tuner without success:
[ 1346.707405] DVB: registering new adapter (AVerMedia Twinstar (A825))
[ 1346.959043] i2c i2c-1: af9033: firmware version: LINK=11.5.9.0
OFDM=5.17.9.1
[ 1346.962920] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech
AF9033 (DVB-T))...
[ 1347.439354] mxl5007t 1-0060: creating new instance
[ 1347.440644] mxl5007t_get_chip_id: unknown rev (3f)
[ 1347.440652] mxl5007t_get_chip_id: MxL5007T detected @ 1-0060
[ 1347.443023] mxl5007t_write_reg: 472: failed!
[ 1347.443031] mxl5007t_attach: error -121 on line 903
[ 1347.443790] usb 1-2: dvb_usb_v2: 'AVerMedia Twinstar (A825)' error
while
loading driver (-19)
[ 1347.446624] usb 1-2: dvb_usb_v2: 'AVerMedia Twinstar (A825)'
successfully deinitialized and disconnected
I don't see how the hell it could even go to the mxl5007t_write_reg()
during attach. Any idea?
Now with the patches I sent for mxl5007 in the attach function
mxl5007t_soft_reset is called, and also loop_thru_enable is writed. The
problem is that the read is performed and it return a good value, but the next
writes fail.
I have some thoughts that mxl5007t do not use repeated condition. Driver
still does that. Could you test to perform register read without a
repeated I2C condition?
How I can do that? what it is a repeated i2c condition?
You should take a look for I2C specification.
Please test that:
http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/af9035_i2c_mxl5007t_test
It fixes similar issue of AF9015 driver :)
I am not able to test AF9035 as I have no hw. It is compile tested only.
Try to do some tweaking for AF9035 implementation if it does not work!
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
