State 9 means TS started to be output, and it should be
associated with FE_HAS_SYNC.
The mb86a20scan get CNR statistics at state 7, when frame sync
is obtained.
As CNR may help to adjust the antenna, provide it earlier.
A latter patch could eventually start outputing MER measures
earlier, but that would require a bigger change, and probably
won't be better than the current way, as the time between
changing from state 8 to 9 is generally lower than the time
to get the stats collected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/dvb-frontends/mb86a20s.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c
index daeee81..e222e55 100644
--- a/drivers/media/dvb-frontends/mb86a20s.c
+++ b/drivers/media/dvb-frontends/mb86a20s.c
@@ -312,7 +312,7 @@ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
dev_dbg(&state->i2c->dev, "%s: Status = 0x%02x (state = %d)\n",
__func__, *status, val);
- return 0;
+ return val;
}
static int mb86a20s_read_signal_strength(struct dvb_frontend *fe)
@@ -1564,7 +1564,7 @@ static void mb86a20s_stats_not_ready(struct dvb_frontend *fe)
}
}
-static int mb86a20s_get_stats(struct dvb_frontend *fe)
+static int mb86a20s_get_stats(struct dvb_frontend *fe, int status_nr)
{
struct mb86a20s_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
@@ -1584,6 +1584,14 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe)
/* Get per-layer stats */
mb86a20s_get_blk_error_layer_CNR(fe);
+ /*
+ * At state 7, only CNR is available
+ * For BER measures, state=9 is required
+ * FIXME: we may get MER measures with state=8
+ */
+ if (status_nr < 9)
+ return 0;
+
for (i = 0; i < 3; i++) {
if (c->isdbt_layer_enabled & (1 << i)) {
/* Layer is active and has rc segments */
@@ -1875,7 +1883,7 @@ static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe,
{
struct mb86a20s_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
- int rc;
+ int rc, status_nr;
dev_dbg(&state->i2c->dev, "%s called.\n", __func__);
@@ -1883,12 +1891,12 @@ static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe,
fe->ops.i2c_gate_ctrl(fe, 0);
/* Get lock */
- rc = mb86a20s_read_status(fe, status);
- if (!(*status & FE_HAS_LOCK)) {
+ status_nr = mb86a20s_read_status(fe, status);
+ if (status_nr < 7) {
mb86a20s_stats_not_ready(fe);
mb86a20s_reset_frontend_cache(fe);
}
- if (rc < 0) {
+ if (state < 0) {
dev_err(&state->i2c->dev,
"%s: Can't read frontend lock status\n", __func__);
goto error;
@@ -1908,7 +1916,7 @@ static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe,
/* Fill signal strength */
c->strength.stat[0].uvalue = rc;
- if (*status & FE_HAS_LOCK) {
+ if (status_nr >= 7) {
/* Get TMCC info*/
rc = mb86a20s_get_frontend(fe);
if (rc < 0) {
@@ -1919,7 +1927,7 @@ static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe,
}
/* Get statistics */
- rc = mb86a20s_get_stats(fe);
+ rc = mb86a20s_get_stats(fe, status_nr);
if (rc < 0 && rc != -EBUSY) {
dev_err(&state->i2c->dev,
"%s: Can't get FE statistics.\n", __func__);
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
