While working to add support for a new device, I discovered a series of issues with mb86a20s and one with em28xx. While here, I also changed cx231xx to improve its signal detection, by using a different IF frequency and increasing the IF signal level from the tuner by 12dB. Mauro Carvalho Chehab (11): [media] mb86a20s: don't pollute dmesg with debug messages [media] mb86a20s: adjust IF based on what's set on the tuner [media] mb86a20s: provide CNR stats before FE_HAS_SYNC [media] mb86a20s: Fix signal strength calculus [media] mb86a20s: don't allow updating signal strength too fast [media] mb86a20s: change AGC tuning parameters [media] mb86a20s: Always reset the frontend with set_frontend [media] mb86a20s: Don't reset strength with the other stats [media] mb86a20s: cleanup the status at set_frontend() [media] cx231xx: Improve signal reception for PV SBTVD [media] em28xx-dvb: Don't put device in suspend mode at feed stop drivers/media/dvb-core/dmxdev.c | 3 +- drivers/media/dvb-frontends/mb86a20s.c | 200 +++++++++++++++++++++----------- drivers/media/usb/cx231xx/cx231xx-dvb.c | 4 +- drivers/media/usb/em28xx/em28xx-dvb.c | 2 - 4 files changed, 136 insertions(+), 73 deletions(-) -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
