On 23 December 2012 00:42, Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> wrote: > Em Sat, 22 Dec 2012 22:25:24 +0100 > Roland Scheidegger <rscheidegger_lists@xxxxxxxxxx> escreveu: > >> Am 21.12.2012 06:38, schrieb linux-media-owner@xxxxxxxxxxxxxxx: >> > Hi, >> > >> > I've recently got a terratec h5 for dvb-c and thought it would be >> > supported but it looks like it's a newer revision not recognized by em28xx. >> > After using the new_id hack it gets recognized and using various htc >> > cards (notably h5 or cinergy htc stick, cards 79 and 82 respectively) it >> > seems to _nearly_ work but not quite (I was using h5 firmware for the >> > older version). Tuning, channel scan works however tv (or dvb radio) >> > does not, since it appears the error rate is going through the roof >> > (with some imagination it is possible to see some parts of the picture >> > sometimes and hear some audio pieces). femon tells something like this: >> >> <snip> >> Hmm actually it doesn't work any better at all with windows neither, so >> I guess it doesn't like my cable signal (I do have another mantis-based >> pci dvb-c card which works without issue). Maybe the tuner is just crappy. >> So I guess it wouldn't hurt to simply add the usb id of this card >> (0ccd:10b6) as another terratec h5 (this doesn't get you the IR but it's >> a start I guess). >> The dvb-t part though works without issue on windows, and I could not >> get that to work in linux (I've used kaffeine and dvb-fe-tool to force >> the dvbt delivery system if that's supposed to work). When scanning the >> right frequency it spew out some error messages though: >> DvbScanFilter::timerEvent: timeout while reading section; type = 0 pid = 0 >> kaffeine(7527) DvbScanFilter::timerEvent: timeout while reading section; >> type = 2 pid = 17 > > If DVB-T is also not working, then I suspect that the device is different > than the previous revisions. There are two ways to connect the DRX-K with > em28xx: serial or parallel. Maybe you need to touch that. > > The better would be to sniff the usb traffic using the tools at v4l-utils.git > and see what's happening there. Roland, did you sniff the usb traffic and/or adjust the serial/ parallel setting yet? I happen to have a H5 rev 3 as well. >> >> Roland >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- > > Cheers, > Mauro > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
