On 12/05/2012 05:41 AM, Matthew Gyurgyik wrote:
On 12/04/2012 04:06 PM, Frank Schäfer wrote:
I double-checked the log and it is indeed set to LGDT3305_MPEG_SERIAL,
but LGDT3305_TPCLK_FALLING_EDGE is used instead of
LGDT3305_TPCLK_RISING_EDGE.
OTOH, the KWorld A340 bord sets this to LGDT3305_MPEG_PARALLEL...
Matthew, could you please test V3 of the patch ? It is written against
the media_tree staging/for_v3.8 (see
http://git.linuxtv.org/media_tree.git).
You could also already test the remote control key map (e.g. with evtest)
Regards,
Frank
Version 3 has the same behavior has v2. It seems I can tune a channel,
but trying to watch it fails. There is no data being set to
/dev/dvb/adapter0/dvr0
Tune channel
[root@tux ~]# azap -r -c /home/pyther/channels.conf "ION LIF"
[root@tux ~]# dvbdate
dvbdate: Unable to get time from multiplex.
I got further on a channel scan but then encountered some errors (no
channels detected):
http://pyther.net/a/digivox_atsc/patch3/scan.txt
http://pyther.net/a/digivox_atsc/patch3/dmesg_after_scan.txt
dmesg: http://pyther.net/a/digivox_atsc/patch3/dmesg.txt
azap: http://pyther.net/a/digivox_atsc/patch3/azap.txt
dvbtraffic: http://pyther.net/a/digivox_atsc/patch3/dvbtraffic.txt
Matthew
There is something really wrong.
I am not at US expert but why the hell
us-Cable-Standard-center-frequencies-QAM256 scans up to 999MHz whilst
demodulator max is set 858? Either one is wrong.
Also, demod seems to be HAS_LOCK about all the time. As that basic LOCK
flag is simply false you cannot even thing if there is correct
configuration on TS interface. If you start zapping that known channel
and then unplug & plug antenna cable did you see still all the time
HAS_LOCK? (it should disappear when antenna cable is unplugged).
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
