On 2012-11-15 21:43, Anders Thomson wrote:
On 2012-10-01 18:56, Anders Thomson wrote:
> On 2012-09-23 23:06, Anders Thomson wrote:
> > Awfully sorry about this. After having had the familty sit in and check
> > the differences,
> > I must say that the patch does not fix the issue. This time around I
> > have x11grabs with
> > ffmpeg to show if you want.
> >
> > I'll be away from the card until the end of the coming week. Then, I'll
> > bring out the multimeter...
> >
> >
> So, I got the multimeter working over the weekend and pretty much no
> results there. :-(
> I tested vanilla 3.5.3, w/ my patch, w/ your "tuner" patch. All three
> gave a (DC) reading of 0 to 30 mV (yes milli-). Given that the wiki page
> you referred to spoke of a few volts, I guess this is just noise. Coming
> to think of it, shouldn't any signal amplification done work on HF, so
> I'd have to measure the AC on the carrier freq or something? This
> multimeter is useless in the MHz range...
>
> While at it, I created these 20 sec snippets:
> http://pickup.famthomson.se/output-vanilla.avi
> vanilla 3.5.3
>
> http://pickup.famthomson.se/output-test3.avi
> This patch:
> # cat /TV_TEST3.diff
> diff --git a/drivers/media/video/saa7134/saa7134-cards.c
> b/drivers/media/video/saa7134/saa7134-cards.c
> index bc08f1d..98b482e 100644
> --- a/drivers/media/video/saa7134/saa7134-cards.c
> +++ b/drivers/media/video/saa7134/saa7134-cards.c
> @@ -3291,7 +3291,7 @@ struct saa7134_board saa7134_boards[] = {
> .radio_type = UNSET,
> .tuner_addr = ADDR_UNSET,
> .radio_addr = ADDR_UNSET,
> - .tuner_config = 1,
> + .tuner_config = 0,
> .mpeg = SAA7134_MPEG_DVB,
> .gpiomask = 0x000200000,
> .inputs = {{
>
> http://pickup.famthomson.se/output-card.avi
> This patch:
> # cat /TV_CARD.diff
> diff --git a/drivers/media/common/tuners/tda8290.c
> b/drivers/media/common/tuners/tda8290.c
> index 064d14c..498cc7b 100644
> --- a/drivers/media/common/tuners/tda8290.c
> +++ b/drivers/media/common/tuners/tda8290.c
> @@ -635,7 +635,11 @@ static int tda829x_find_tuner(struct dvb_frontend *fe)
>
> dvb_attach(tda827x_attach, fe, priv->tda827x_addr,
> priv->i2c_props.adap,&priv->cfg);
> + tuner_info("ANDERS: setting switch_addr. was 0x%02x, new
> 0x%02x\n",priv->cfg.switch_addr,priv->i2c_props.addr);
> priv->cfg.switch_addr = priv->i2c_props.addr;
> + priv->cfg.switch_addr = 0xc2 / 2;
> + tuner_info("ANDERS: new 0x%02x\n",priv->cfg.switch_addr);
> +
> }
> if (fe->ops.tuner_ops.init)
> fe->ops.tuner_ops.init(fe);
>
>
> Would looking again at the specifics on the 2.6.25->26 transition be of
> any help? I expect some pain to go to such old kernel, but if I can add
> some printks somewhere, maybe that could help?
>
> Cheers,
> -Anders
>
Hi Mauro,
Picking up this thread again. Did you have chance to look into this?
/Anders
Hi Mauro,
Any chance we can make progress on this one? As indicated, the patches
you've proposed do not work. I have no idea why mine does though....
/Anders
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
