On 11/06/2012 02:01 PM, Oliver Schinagl wrote:
On 05-11-12 23:58, Antti Palosaari wrote:
On 10/30/2012 11:24 AM, Oliver Schinagl wrote:
On 29-10-12 02:09, Antti Palosaari wrote:
su 28.10.2012 22:07 Mauro Carvalho Chehab kirjoitti:
Em Mon, 22 Oct 2012 10:17:26 +0200
Oliver Schinagl <oliver+list@xxxxxxxxxxx> escreveu:
diff --git a/drivers/media/tuners/fc2580.c
b/drivers/media/tuners/fc2580.c
index aff39ae..102d942 100644
I found a fellow Asus U3100+ user (mentioned him before with the
firmware issue) that even when using the latest firmware, still see's
0xff as the chipID.
You missed to add a signed-off-by on your patch.
Maybe it would make sense, in this case, to print some warning
message,
as this could be due to a bug either at the hardware or at some place
at the driver, like the gpio config settings for this device.
Anyway, Antti, your call.
I am on holiday now and dont want to look much these things at the
moment.
Having 0x00 or 0xff as chip id is something very very stupid and not
exits
in real world. It is good indicator I2C operation was failing. Check
GPIOs, see windows sniffs, add sleep, test if other I2C reads are
working
later, etc. to find out more info and fix it properly. In worst case
it is
possible that I2C reads are not working at all...
This was a random report for someone who I assisted via e-mail to get
the latest git clone from antti's tree. Building, enabling debugging and
getting this information alone took a week. I don't think we have the
possibility to get a dump from anything. The stick has been working fine
from my understanding using the 0xff tunerID. How to handle support for
these 'bugged' tuners, I leave that up to you :)
Honestly I don't want to add hack like that with this little
information. It must be found out if all I2C readings are failing, or
just the first one, or some other condition. Currently there is only
two register reads on that driver. Guess what happens if someone
enhances that driver so that one bit from certain register is
changed... Set register bit 7, current register value is 0x00.
Register value will be 0x7ff as read returns always 0xff :-(
true, do you have some test code, that could test this? or a test module
that prints some debug information for this specific case? I could then
have the user in question try it out and report his findings?
Just add like 5 register reads one after another inside attach and print
out returned values. Or add debug print to register read to see what it
returns as read is used during tune too. Write different tuner id to
af9035 firmware to see if it is fw issue. There is million ways to make
tests and see what happens and make conclusions.
Antti
oliver
AFTER your well deserved holiday. Enjoy and have a great time!
--- a/drivers/media/tuners/fc2580.c
+++ b/drivers/media/tuners/fc2580.c
@@ -497,6 +497,7 @@ struct dvb_frontend *fc2580_attach(struct
dvb_frontend *fe,
switch (chip_id) {
case 0x56:
case 0x5a:
+ case 0xff:
break;
default:
goto err;
--
To unsubscribe from this list: send the line "unsubscribe
linux-media"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe
linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
regards
Antti
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
