On 10/08/2012 01:43 AM, Hans Verkuil wrote:
> On Sat October 6 2012 03:54:57 Andrey Smirnov wrote:
>> This patch adds all necessary header files and Kbuild plumbing for the
>> core driver for Silicon Laboratories Si476x series of AM/FM tuner
>> chips.
>>
>> The driver as a whole is implemented as an MFD device and this patch
>> adds a core portion of it that provides all the necessary
>> functionality to the two other drivers that represent radio and audio
>> codec subsystems of the chip.
>>
>> Signed-off-by: Andrey Smirnov <andrey.smirnov@xxxxxxxxxxxxxxxxxxxx>
>> ---
>> drivers/mfd/Kconfig | 14 ++
>> drivers/mfd/Makefile | 3 +
>> include/linux/mfd/si476x-core.h | 529 +++++++++++++++++++++++++++++++++++++++
>> include/media/si476x.h | 449 +++++++++++++++++++++++++++++++++
>> 4 files changed, 995 insertions(+)
>> create mode 100644 include/linux/mfd/si476x-core.h
>> create mode 100644 include/media/si476x.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index b1a1462..3fab06d 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -895,6 +895,20 @@ config MFD_WL1273_CORE
>> driver connects the radio-wl1273 V4L2 module and the wl1273
>> audio codec.
>>
>> +config MFD_SI476X_CORE
>> + tristate "Support for Silicon Laboratories 4761/64/68 AM/FM radio."
>> + depends on I2C
>> + select MFD_CORE
>> + default n
>> + help
>> + This is the core driver for the SI476x series of AM/FM radio. This MFD
>> + driver connects the radio-si476x V4L2 module and the si476x
>> + audio codec.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called si476x-core.
>> +
>> +
>> config MFD_OMAP_USB_HOST
>> bool "Support OMAP USBHS core driver"
>> depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 79dd22d..942257b 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -132,3 +132,6 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
>> obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
>> obj-$(CONFIG_MFD_ANATOP) += anatop-mfd.o
>> obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
>> +
>> +si476x-core-objs := si476x-cmd.o si476x-prop.o si476x-i2c.o
>> +obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
>> diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
>> new file mode 100644
>> index 0000000..eb6f52a
>> --- /dev/null
>> +++ b/include/linux/mfd/si476x-core.h
>> @@ -0,0 +1,529 @@
>> +/*
>> + * include/media/si476x-core.h -- Common definitions for si476x core
>> + * device
>> + *
>> + * Copyright (C) 2012 Innovative Converged Devices(ICD)
>> + *
>> + * Author: Andrey Smirnov <andrey.smirnov@xxxxxxxxxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; version 2 of the License.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + */
>> +
>> +#ifndef SI476X_CORE_H
>> +#define SI476X_CORE_H
>> +
>> +#include <linux/kfifo.h>
>> +#include <linux/atomic.h>
>> +#include <linux/i2c.h>
>> +#include <linux/mutex.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/videodev2.h>
>> +
>> +#include <media/si476x.h>
>> +
>> +#ifdef DEBUG
>> +#define DBG_BUFFER(device, header, buffer, bcount) \
>> + do { \
>> + dev_info((device), header); \
>> + print_hex_dump_bytes("", \
>> + DUMP_PREFIX_OFFSET, \
>> + buffer, bcount); \
>> + } while (0)
>> +#else
>> +#define DBG_BUFFER(device, header, buffer, bcount) \
>> + do {} while (0)
>> +#endif
>> +
>> +enum si476x_freq_suppoted_chips {
> typo: suppoted -> supported
>
>> + SI476X_CHIP_SI4761 = 1,
>> + SI476X_CHIP_SI4762,
>> + SI476X_CHIP_SI4763,
>> + SI476X_CHIP_SI4764,
>> + SI476X_CHIP_SI4768,
>> + SI476X_CHIP_SI4769,
>> +};
>> +
>> +enum si476x_mfd_cells {
>> + SI476X_RADIO_CELL = 0,
>> + SI476X_CODEC_CELL,
>> + SI476X_MFD_CELLS,
>> +};
>> +
>> +
>> +/**
>> + * enum si476x_power_state - possible power state of the si476x
>> + * device.
>> + *
>> + * @SI476X_POWER_DOWN: In this state all regulators are turned off
>> + * and the reset line is pulled low. The device is completely
>> + * inactive.
>> + * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
>> + * turned on, reset line pulled high, IRQ line is enabled(polling is
>> + * active for polling use scenario) and device is turned on with
>> + * POWER_UP command. The device is ready to be used.
>> + * @SI476X_POWER_INCONSISTENT: This state indicates that previous
>> + * power down was inconsisten meaning some of he regulators wer not
>> + * turned down and thus the consequent use of the device, without
>> + * power-cycling it is impossible.
>> + */
>> +enum si476x_power_state {
>> + SI476X_POWER_DOWN = 0,
>> + SI476X_POWER_UP_FULL = 1,
>> + SI476X_POWER_INCONSISTENT = 2,
>> +};
>> +
>> +/**
>> + * struct si476x_core - internal data structure representing the
>> + * underlying "core" device which all the MFD cell-devices use.
>> + *
>> + * @client: Actual I2C client used to transfer commands to the chip.
>> + * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
>> + * @cells: MFD cell devices created by this driver.
>> + * @cmd_lock: Mutex used to serialize all the requests to the core
>> + * device. This filed should not be used directly. Instead
>> + * si476x_core_lock()/si476x_core_unlock() should be used to get
>> + * exclusive access to the "core" device.
>> + * @users: Active users counter(Used by the radio cell)
>> + * @rds_read_queue: Wait queue used to wait for RDS data.
>> + * @rds_fifo: FIFO in which all the RDS data received from the chip is
>> + * placed.
>> + * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
>> + * @rds_drainer_is_working: Flag used for launching only one instance
>> + * of the @rds_fifo_drainer.
>> + * @rds_drainer_status_lock: Lock used to guard access to the
>> + * @rds_drainer_is_working variable.
>> + * @command: Wait queue for wainting on the command comapletion.
>> + * @cts: Clear To Send flag set upon receiving first status with CTS
>> + * set.
>> + * @tuning: Wait queue used for wainting for tune/seek comand
>> + * completion.
>> + * @stc: Similar to @cts, but for the STC bit of the status value.
>> + * @power_up_parameters: Parameters used as argument for POWER_UP
>> + * command when the device is started.
>> + * @state: Current power state of the device.
>> + * @supplues: Structure containing handles to all power supplies used
>> + * by the device (NULL ones are ignored).
>> + * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
>> + * @pinmux: Chip's configurable pins configuration.
>> + * @diversity_mode: Chips role when functioning in diversity mode.
>> + * @status_monitor: Polling worker used in polling use case scenarion
>> + * (when IRQ is not avalible).
>> + * @revision: Chip's running firmware revision number(Used for correct
>> + * command set support).
>> + */
>> +
>> +struct si476x_core {
>> + struct i2c_client *client;
>> + int chip_id;
>> + struct mfd_cell cells[SI476X_MFD_CELLS];
>> +
>> + struct mutex cmd_lock; /* for serializing fm radio operations */
>> + atomic_t users;
>> +
>> + wait_queue_head_t rds_read_queue;
>> + struct kfifo rds_fifo;
>> + struct work_struct rds_fifo_drainer;
>> + bool rds_drainer_is_working;
>> + struct mutex rds_drainer_status_lock;
>> +
>> +
>> + wait_queue_head_t command;
>> + atomic_t cts;
>> +
>> + wait_queue_head_t tuning;
>> + atomic_t stc;
>> +
>> + struct si476x_power_up_args power_up_parameters;
>> +
>> + enum si476x_power_state power_state;
>> +
>> + struct {
>> + struct regulator *vio1;
>> + struct regulator *vd;
>> + struct regulator *va;
>> + struct regulator *vio2;
>> + } supplies;
>> +
>> + int gpio_reset;
>> +
>> + struct si476x_pinmux pinmux;
>> + enum si476x_phase_diversity_mode diversity_mode;
>> +
>> + atomic_t is_alive;
>> +
>> + struct delayed_work status_monitor;
>> +#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
>> + struct si476x_core, \
>> + status_monitor)
>> +
>> + int revision;
>> +
>> + int rds_fifo_depth;
>> +
>> + struct {
>> + atomic_t tune;
>> + atomic_t power_up;
>> + atomic_t command;
>> + } timeouts;
>> +
>> + atomic_t polling_interval;
>> +};
>> +
>> +static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
>> +{
>> + struct i2c_client *client = to_i2c_client(dev->parent);
>> + return i2c_get_clientdata(client);
>> +}
>> +
>> +
>> +/**
>> + * si476x_core_lock() - lock the core device to get an exclusive acces
> acces -> access
>
>> + * to it.
>> + */
>> +static inline void si476x_core_lock(struct si476x_core *core)
>> +{
>> + mutex_lock(&core->cmd_lock);
>> +}
>> +
>> +/**
>> + * si476x_core_unlock() - unlock the core device to relinquish an
>> + * exclusive acces to it.
> Ditto
>
>> + */
>> +static inline void si476x_core_unlock(struct si476x_core *core)
>> +{
>> + mutex_unlock(&core->cmd_lock);
>> +}
>> +
>> +void si476x_core_get(struct si476x_core *core);
>> +void si476x_core_put(struct si476x_core *core);
>> +
>> +
>> +/* *_TUNE_FREQ family of commands accept frequency in multiples of
>> + 10kHz */
>> +static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
>> +{
>> + u16 result;
>> +
>> + switch (core->power_up_parameters.func) {
>> + default:
>> + case SI476X_FUNC_FM_RECEIVER:
>> + result = freq / 10000;
>> + break;
>> + case SI476X_FUNC_AM_RECEIVER:
>> + result = freq / 1000;
>> + break;
>> + }
>> +
>> + return result;
>> +}
>> +
>> +static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
>> +{
>> + int result;
>> +
>> + switch (core->power_up_parameters.func) {
>> + default:
>> + case SI476X_FUNC_FM_RECEIVER:
>> + result = freq * 10000;
>> + break;
>> + case SI476X_FUNC_AM_RECEIVER:
>> + result = freq * 1000;
>> + break;
>> + }
>> +
>> + return result;
>> +}
>> +
>> +/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
>> + * mesures frequency in 62.5 Hz units */
>> +
>> +static inline int hz_to_v4l2(int freq)
>> +{
>> + return (freq * 10) / 625;
>> +}
>> +
>> +static inline int v4l2_to_hz(int freq)
>> +{
>> + return (freq * 625) / 10;
>> +}
>> +
>> +static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
>> +{
>> + return hz_to_si476x(core, v4l2_to_hz(freq));
>> +}
>> +
>> +static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
>> +{
>> + return hz_to_v4l2(si476x_to_hz(core, freq));
>> +}
>> +
>> +
>> +
>> +/**
>> + * struct si476x_func_info - structure containing result of the
>> + * FUNC_INFO command.
>> + *
>> + * @firmware.major: Firmare major number.
> Firmare -> Firmware
>
>> + * @firmware.minor[...]: Firmare minor numbers.
> ditto
>
>> + * @patch_id:
>> + * @func: Mode tuner is working in.
>> + */
>> +struct si476x_func_info {
>> + struct {
>> + u8 major, minor[2];
>> + } firmware;
>> + u16 patch_id;
>> + enum si476x_func func;
>> +};
>> +
>> +/**
>> + * struct si476x_power_down_args - structure used to pass parameters
>> + * to POWER_DOWN command
>> + *
>> + * @xosc: true - Power down, but leav oscillator running.
>> + * false - Full power down.
>> + */
>> +struct si476x_power_down_args {
>> + bool xosc;
>> +};
>> +
>> +/**
>> + * enum si476x_tunemode - enum representing possible tune modes for
>> + * the chip.
>> + * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
>> + * channel after tune, tune status is valid.
>> + * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
>> + * channel after tune, tune status invalid.
>> + * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
>> + * metric thresholds are not met.
>> + * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
>> + * previous channel.
>> + */
>> +enum si476x_tunemode {
>> + SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
>> + SI476X_TM_INVALIDATED_FAST_TUNE = 1,
>> + SI476X_TM_VALIDATED_AF_TUNE = 2,
>> + SI476X_TM_VALIDATED_AF_CHECK = 3,
>> +};
>> +
>> +/**
>> + * enum si476x_smoothmetrics - enum containing the possible setting fo
>> + * audio transitioning of the chip
>> + * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
>> + * new channel
>> + * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
>> + * channel values to the new values
>> + */
>> +enum si476x_smoothmetrics {
>> + SI476X_SM_INITIALIZE_AUDIO = 0,
>> + SI476X_SM_TRANSITION_AUDIO = 1,
>> +};
>> +
>> +/**
>> + * struct si476x_rds_status_report - the structure representing the
>> + * response to 'FM_RD_STATUS' command
>> + * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
>> + * code has changed.
>> + * @rdspiint: Program indentifiaction(PI) code has changed.
>> + * @rdssyncint: RDS synchronization has changed.
>> + * @rdsfifoint: RDS was received and the RDS FIFO has at least
>> + * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
>> + * @tpptyvalid: TP flag and PTY code are valid falg.
>> + * @pivalid: PI code is valid flag.
>> + * @rdssync: RDS is currently synchronized.
>> + * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
>> + * @tp: Current channel's TP flag.
>> + * @pty: Current channel's PTY code.
>> + * @pi: Current channel's PI code.
>> + * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
>> + * empty).
>> + */
>> +struct si476x_rds_status_report {
>> + bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
>> + bool tpptyvalid, pivalid, rdssync, rdsfifolost;
>> + bool tp;
>> +
>> + u8 pty;
>> + u16 pi;
>> +
>> + u8 rdsfifoused;
>> + u8 ble[4];
>> +
>> + struct v4l2_rds_data rds[4];
>> +};
>> +
>> +struct si476x_rsq_status_args {
>> + bool primary;
>> + bool rsqack;
>> + bool attune;
>> + bool cancel;
>> + bool stcack;
>> +};
>> +
>> +enum si476x_injside {
>> + SI476X_INJSIDE_AUTO = 0,
>> + SI476X_INJSIDE_LOW = 1,
>> + SI476X_INJSIDE_HIGH = 2,
>> +};
>> +
>> +struct si476x_tune_freq_args {
>> + bool zifsr;
>> + bool hd;
>> + enum si476x_injside injside;
>> + int freq;
>> + enum si476x_tunemode tunemode;
>> + enum si476x_smoothmetrics smoothmetrics;
>> + int antcap;
>> +};
>> +
>> +int si476x_core_stop(struct si476x_core *, bool);
>> +int si476x_core_start(struct si476x_core *, bool);
>> +int si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
>> +int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
>> +int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
>> +int si476x_core_cmd_get_property(struct si476x_core *, u16);
>> +int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
>> + enum si476x_dclk_config,
>> + enum si476x_dfs_config,
>> + enum si476x_dout_config,
>> + enum si476x_xout_config);
>> +int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
>> + enum si476x_iqclk_config,
>> + enum si476x_iqfs_config,
>> + enum si476x_iout_config,
>> + enum si476x_qout_config);
>> +int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
>> + enum si476x_icin_config,
>> + enum si476x_icip_config,
>> + enum si476x_icon_config,
>> + enum si476x_icop_config);
>> +int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
>> + enum si476x_lrout_config);
>> +int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
>> + enum si476x_a1_config);
>> +int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
>> +int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
>> +int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
>> + struct si476x_rds_status_report *);
>> +int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
>> + struct si476x_rds_blockcount_report *);
>> +int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
>> + struct si476x_tune_freq_args *);
>> +int si476x_core_cmd_am_tune_freq(struct si476x_core *,
>> + struct si476x_tune_freq_args *);
>> +int si476x_core_cmd_am_rsq_status(struct si476x_core *,
>> + struct si476x_rsq_status_args *,
>> + struct si476x_rsq_status_report *);
>> +int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
>> + struct si476x_rsq_status_args *,
>> + struct si476x_rsq_status_report *);
>> +int si476x_core_cmd_power_up(struct si476x_core *,
>> + struct si476x_power_up_args *);
>> +int si476x_core_cmd_power_down(struct si476x_core *,
>> + struct si476x_power_down_args *);
>> +int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
>> +int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
>> + enum si476x_phase_diversity_mode);
>> +
>> +int si476x_core_cmd_fm_acf_status(struct si476x_core *,
>> + struct si476x_acf_status_report *);
>> +int si476x_core_cmd_am_acf_status(struct si476x_core *,
>> + struct si476x_acf_status_report *);
>> +int si476x_core_cmd_agc_status(struct si476x_core *,
>> + struct si476x_agc_status_report *);
>> +
>> +enum si476x_power_grid_type {
>> + SI476X_POWER_GRID_50HZ = 0,
>> + SI476X_POWER_GRID_60HZ,
>> +};
>> +
>> +/* Properties */
>> +
>> +enum si476x_interrupt_flags {
>> + SI476X_STCIEN = (1 << 0),
>> + SI476X_ACFIEN = (1 << 1),
>> + SI476X_RDSIEN = (1 << 2),
>> + SI476X_RSQIEN = (1 << 3),
>> +
>> + SI476X_ERRIEN = (1 << 6),
>> + SI476X_CTSIEN = (1 << 7),
>> +
>> + SI476X_STCREP = (1 << 8),
>> + SI476X_ACFREP = (1 << 9),
>> + SI476X_RDSREP = (1 << 10),
>> + SI476X_RSQREP = (1 << 11),
>> +};
>> +
>> +enum si476x_rdsint_sources {
>> + SI476X_RDSTPPTY = (1 << 4),
>> + SI476X_RDSPI = (1 << 3),
>> + SI476X_RDSSYNC = (1 << 1),
>> + SI476X_RDSRECV = (1 << 0),
>> +};
>> +
>> +enum si476x_status_response_bits {
>> + SI476X_CTS = (1 << 7),
>> + SI476X_ERR = (1 << 6),
>> + /* Status response for WB receiver */
>> + SI476X_WB_ASQ_INT = (1 << 4),
>> + SI476X_RSQ_INT = (1 << 3),
>> + /* Status response for FM receiver */
>> + SI476X_FM_RDS_INT = (1 << 2),
>> + SI476X_ACF_INT = (1 << 1),
>> + SI476X_STC_INT = (1 << 0),
>> +};
>> +
>> +bool si476x_core_is_valid_property(struct si476x_core *, u16);
>> +bool si476x_core_is_readonly_property(struct si476x_core *, u16);
>> +int si476x_core_set_int_ctl_enable(struct si476x_core *,
>> + enum si476x_interrupt_flags);
>> +
>> +int si476x_core_set_frequency_spacing(struct si476x_core *, int);
>> +int si476x_core_set_seek_band_top(struct si476x_core *, int);
>> +int si476x_core_set_seek_band_bottom(struct si476x_core *, int);
>> +int si476x_core_set_audio_deemphasis(struct si476x_core *, int);
>> +int si476x_core_set_rds_reception(struct si476x_core *, int);
>> +int si476x_core_set_audio_pwr_line_filter(struct si476x_core *, bool,
>> + enum si476x_power_grid_type, int);
>> +
>> +int si476x_core_set_valid_snr_threshold(struct si476x_core *, int);
>> +int si476x_core_set_valid_rssi_threshold(struct si476x_core *, int);
>> +int si476x_core_set_valid_max_tune_error(struct si476x_core *, int);
>> +
>> +int si476x_core_get_frequency_spacing(struct si476x_core *);
>> +int si476x_core_get_seek_band_top(struct si476x_core *);
>> +int si476x_core_get_seek_band_bottom(struct si476x_core *);
>> +int si476x_core_get_audio_deemphasis(struct si476x_core *);
>> +int si476x_core_get_rds_reception(struct si476x_core *);
>> +int si476x_core_get_audio_pwr_line_filter(struct si476x_core *);
>> +
>> +int si476x_core_get_valid_snr_threshold(struct si476x_core *);
>> +int si476x_core_get_valid_rssi_threshold(struct si476x_core *);
>> +int si476x_core_get_valid_max_tune_error(struct si476x_core *);
>> +
>> +int si476x_core_set_fm_rds_interrupt_fifo_count(struct si476x_core *, int);
>> +int si476x_core_set_rds_interrupt_source(struct si476x_core *,
>> + enum si476x_rdsint_sources);
>> +int si476x_core_set_digital_io_input_sample_rate(struct si476x_core *, u16);
>> +int si476x_core_disable_digital_audio(struct si476x_core *);
>> +
>> +typedef int (*tune_freq_func_t) (struct si476x_core *,
>> + struct si476x_tune_freq_args *);
>> +
>> +enum si476x_i2c_type {
>> + SI476X_I2C_SEND,
>> + SI476X_I2C_RECV
>> +};
>> +
>> +int si476x_i2c_xfer(struct si476x_core *,
>> + enum si476x_i2c_type,
>> + char *, int);
>> +#endif /* SI476X_CORE_H */
>> diff --git a/include/media/si476x.h b/include/media/si476x.h
>> new file mode 100644
>> index 0000000..6f6c253
>> --- /dev/null
>> +++ b/include/media/si476x.h
>> @@ -0,0 +1,449 @@
>> +/*
>> + * include/media/si476x.h -- Common definitions for si476x driver
>> + *
>> + * Copyright (C) 2012 Innovative Converged Devices(ICD)
>> + *
>> + * Author: Andrey Smirnov <andrey.smirnov@xxxxxxxxxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; version 2 of the License.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + */
>> +
>> +#ifndef SI476X_H
>> +#define SI476X_H
>> +
>> +#include <linux/types.h>
>> +#include <linux/videodev2.h>
>> +
>> +struct si476x_device;
>> +
>> +/* It is possible to select one of the four adresses using pins A0
>> + * and A1 on SI476x */
>> +#define SI476X_I2C_ADDR_1 0x60
>> +#define SI476X_I2C_ADDR_2 0x61
>> +#define SI476X_I2C_ADDR_3 0x62
>> +#define SI476X_I2C_ADDR_4 0x63
>> +
>> +enum si476x_iqclk_config {
>> + SI476X_IQCLK_NOOP = 0,
>> + SI476X_IQCLK_TRISTATE = 1,
>> + SI476X_IQCLK_IQ = 21,
>> +};
>> +enum si476x_iqfs_config {
>> + SI476X_IQFS_NOOP = 0,
>> + SI476X_IQFS_TRISTATE = 1,
>> + SI476X_IQFS_IQ = 21,
>> +};
>> +enum si476x_iout_config {
>> + SI476X_IOUT_NOOP = 0,
>> + SI476X_IOUT_TRISTATE = 1,
>> + SI476X_IOUT_OUTPUT = 22,
>> +};
>> +enum si476x_qout_config {
>> + SI476X_QOUT_NOOP = 0,
>> + SI476X_QOUT_TRISTATE = 1,
>> + SI476X_QOUT_OUTPUT = 22,
>> +};
>> +
>> +enum si476x_dclk_config {
>> + SI476X_DCLK_NOOP = 0,
>> + SI476X_DCLK_TRISTATE = 1,
>> + SI476X_DCLK_DAUDIO = 10,
>> +};
>> +
>> +enum si476x_dfs_config {
>> + SI476X_DFS_NOOP = 0,
>> + SI476X_DFS_TRISTATE = 1,
>> + SI476X_DFS_DAUDIO = 10,
>> +};
>> +
>> +enum si476x_dout_config {
>> + SI476X_DOUT_NOOP = 0,
>> + SI476X_DOUT_TRISTATE = 1,
>> + SI476X_DOUT_I2S_OUTPUT = 12,
>> + SI476X_DOUT_I2S_INPUT = 13,
>> +};
>> +
>> +enum si476x_xout_config {
>> + SI476X_XOUT_NOOP = 0,
>> + SI476X_XOUT_TRISTATE = 1,
>> + SI476X_XOUT_I2S_INPUT = 13,
>> + SI476X_XOUT_MODE_SELECT = 23,
>> +};
>> +
>> +
>> +enum si476x_icin_config {
>> + SI476X_ICIN_NOOP = 0,
>> + SI476X_ICIN_TRISTATE = 1,
>> + SI476X_ICIN_GPO1_HIGH = 2,
>> + SI476X_ICIN_GPO1_LOW = 3,
>> + SI476X_ICIN_IC_LINK = 30,
>> +};
>> +
>> +enum si476x_icip_config {
>> + SI476X_ICIP_NOOP = 0,
>> + SI476X_ICIP_TRISTATE = 1,
>> + SI476X_ICIP_GPO2_HIGH = 2,
>> + SI476X_ICIP_GPO2_LOW = 3,
>> + SI476X_ICIP_IC_LINK = 30,
>> +};
>> +
>> +enum si476x_icon_config {
>> + SI476X_ICON_NOOP = 0,
>> + SI476X_ICON_TRISTATE = 1,
>> + SI476X_ICON_I2S = 10,
>> + SI476X_ICON_IC_LINK = 30,
>> +};
>> +
>> +enum si476x_icop_config {
>> + SI476X_ICOP_NOOP = 0,
>> + SI476X_ICOP_TRISTATE = 1,
>> + SI476X_ICOP_I2S = 10,
>> + SI476X_ICOP_IC_LINK = 30,
>> +};
>> +
>> +
>> +enum si476x_lrout_config {
>> + SI476X_LROUT_NOOP = 0,
>> + SI476X_LROUT_TRISTATE = 1,
>> + SI476X_LROUT_AUDIO = 2,
>> + SI476X_LROUT_MPX = 3,
>> +};
>> +
>> +
>> +enum si476x_intb_config {
>> + SI476X_INTB_NOOP = 0,
>> + SI476X_INTB_TRISTATE = 1,
>> + SI476X_INTB_DAUDIO = 10,
>> + SI476X_INTB_IRQ = 40,
>> +};
>> +
>> +enum si476x_a1_config {
>> + SI476X_A1_NOOP = 0,
>> + SI476X_A1_TRISTATE = 1,
>> + SI476X_A1_IRQ = 40,
>> +};
>> +
>> +enum si476x_part_revisions {
>> + SI476X_REVISION_A10 = 0,
>> + SI476X_REVISION_A20 = 1,
>> + SI476X_REVISION_A30 = 2,
>> +};
>> +
>> +struct si476x_pinmux {
>> + enum si476x_dclk_config dclk;
>> + enum si476x_dfs_config dfs;
>> + enum si476x_dout_config dout;
>> + enum si476x_xout_config xout;
>> +
>> + enum si476x_iqclk_config iqclk;
>> + enum si476x_iqfs_config iqfs;
>> + enum si476x_iout_config iout;
>> + enum si476x_qout_config qout;
>> +
>> + enum si476x_icin_config icin;
>> + enum si476x_icip_config icip;
>> + enum si476x_icon_config icon;
>> + enum si476x_icop_config icop;
>> +
>> + enum si476x_lrout_config lrout;
>> +
>> + enum si476x_intb_config intb;
>> + enum si476x_a1_config a1;
>> +};
>> +
>> +/**
>> + * enum si476x_phase_diversity_mode - possbile phase diversity modes
>> + * for SI4764/5/6/7 chips.
>> + *
>> + * @SI476X_PHDIV_DISABLED: Phase diversity feature is
>> + * disabled.
>> + * @SI476X_PHDIV_PRIMARY_COMBINING: Tuner works as a primary tuner
>> + * in combination with a
>> + * secondary one.
>> + * @SI476X_PHDIV_PRIMARY_ANTENNA: Tuner works as a primary tuner
>> + * using only its own antenna.
>> + * @SI476X_PHDIV_SECONDARY_ANTENNA: Tuner works as a primary tuner
>> + * usning seconary tuner's antenna.
>> + * @SI476X_PHDIV_SECONDARY_COMBINING: Tuner works as a secondary
>> + * tuner in combination with the
>> + * primary one.
>> + */
>> +enum si476x_phase_diversity_mode {
>> + SI476X_PHDIV_DISABLED = 0,
>> + SI476X_PHDIV_PRIMARY_COMBINING = 1,
>> + SI476X_PHDIV_PRIMARY_ANTENNA = 2,
>> + SI476X_PHDIV_SECONDARY_ANTENNA = 3,
>> + SI476X_PHDIV_SECONDARY_COMBINING = 5,
>> +};
>> +
>> +enum si476x_ibias6x {
>> + SI476X_IBIAS6X_OTHER = 0,
>> + SI476X_IBIAS6X_RCVR1_NON_4MHZ_CLK = 1,
>> +};
>> +
>> +enum si476x_xstart {
>> + SI476X_XSTART_MULTIPLE_TUNER = 0x11,
>> + SI476X_XSTART_NORMAL = 0x77,
>> +};
>> +
>> +enum si476x_freq {
>> + SI476X_FREQ_4_MHZ = 0,
>> + SI476X_FREQ_37P209375_MHZ = 1,
>> + SI476X_FREQ_36P4_MHZ = 2,
>> + SI476X_FREQ_37P8_MHZ = 3,
>> +};
>> +
>> +enum si476x_xmode {
>> + SI476X_XMODE_CRYSTAL_RCVR1 = 1,
>> + SI476X_XMODE_EXT_CLOCK = 2,
>> + SI476X_XMODE_CRYSTAL_RCVR2_3 = 3,
>> +};
>> +
>> +enum si476x_xbiashc {
>> + SI476X_XBIASHC_SINGLE_RECEIVER = 0,
>> + SI476X_XBIASHC_MULTIPLE_RECEIVER = 1,
>> +};
>> +
>> +enum si476x_xbias {
>> + SI476X_XBIAS_RCVR2_3 = 0,
>> + SI476X_XBIAS_4MHZ_RCVR1 = 3,
>> + SI476X_XBIAS_RCVR1 = 7,
>> +};
>> +
>> +enum si476x_func {
>> + SI476X_FUNC_BOOTLOADER = 0,
>> + SI476X_FUNC_FM_RECEIVER = 1,
>> + SI476X_FUNC_AM_RECEIVER = 2,
>> + SI476X_FUNC_WB_RECEIVER = 3,
>> +};
>> +
>> +
>> +/**
>> + * @xcload: Selects the amount of additional on-chip capacitance to
>> + * be connected between XTAL1 and gnd and between XTAL2 and
>> + * GND. One half of the capacitance value shown here is the
>> + * additional load capacitance presented to the xtal. The
>> + * minimum step size is 0.277 pF. Recommended value is 0x28
>> + * but it will be layout dependent. Range is 0–0x3F i.e.
>> + * (0–16.33 pF)
>> + * @ctsien: enable CTSINT(interrupt request when CTS condition
>> + * arises) when set
>> + * @intsel: when set A1 pin becomes the interrupt pin; otherwise,
>> + * INTB is the interrupt pin
>> + * @func: selects the boot function of the device. I.e.
>> + * SI476X_BOOTLOADER - Boot loader
>> + * SI476X_FM_RECEIVER - FM receiver
>> + * SI476X_AM_RECEIVER - AM receiver
>> + * SI476X_WB_RECEIVER - Weatherband receiver
>> + * @freq: oscillator's crystal frequency:
>> + * SI476X_XTAL_37P209375_MHZ - 37.209375 Mhz
>> + * SI476X_XTAL_36P4_MHZ - 36.4 Mhz
>> + * SI476X_XTAL_37P8_MHZ - 37.8 Mhz
>> + */
>> +struct si476x_power_up_args {
>> + enum si476x_ibias6x ibias6x;
>> + enum si476x_xstart xstart;
>> + u8 xcload;
>> + bool fastboot;
>> + enum si476x_xbiashc xbiashc;
>> + enum si476x_xbias xbias;
>> + enum si476x_func func;
>> + enum si476x_freq freq;
>> + enum si476x_xmode xmode;
>> +};
>> +
>> +
>> +enum si476x_ctrl_id {
>> + SI476X_CID_RSSI_THRESHOLD = (V4L2_CID_USER_BASE | 0x1001),
>> + SI476X_CID_SNR_THRESHOLD = (V4L2_CID_USER_BASE | 0x1002),
>> + SI476X_CID_MAX_TUNE_ERROR = (V4L2_CID_USER_BASE | 0x1003),
>> + SI476X_CID_RDS_RECEPTION = (V4L2_CID_USER_BASE | 0x1004),
>> + SI476X_CID_DEEMPHASIS = (V4L2_CID_USER_BASE | 0x1005),
>> + SI476X_CID_HARMONICS_COUNT = (V4L2_CID_USER_BASE | 0x1006),
>> +};
> What do these controls do? Should they be standard controls instead?
>
>> +
>> +/*
>> + * Platform dependent definition
>> + */
>> +struct si476x_platform_data {
>> + int gpio_reset; /* < 0 if not used */
>> +
>> + struct si476x_power_up_args power_up_parameters;
>> + enum si476x_phase_diversity_mode diversity_mode;
>> +
>> + struct si476x_pinmux pinmux;
>> +};
>> +
>> +/**
>> + * struct si476x_rsq_status - structure containing received signal
>> + * quality
>> + * @multhint: Multipath Detect High.
>> + * true - Indicatedes that the value is below
>> + * FM_RSQ_MULTIPATH_HIGH_THRESHOLD
>> + * false - Indicatedes that the value is above
>> + * FM_RSQ_MULTIPATH_HIGH_THRESHOLD
>> + * @multlint: Multipath Detect Low.
>> + * true - Indicatedes that the value is below
>> + * FM_RSQ_MULTIPATH_LOW_THRESHOLD
>> + * false - Indicatedes that the value is above
>> + * FM_RSQ_MULTIPATH_LOW_THRESHOLD
>> + * @snrhint: SNR Detect High.
>> + * true - Indicatedes that the value is below
>> + * FM_RSQ_SNR_HIGH_THRESHOLD
>> + * false - Indicatedes that the value is above
>> + * FM_RSQ_SNR_HIGH_THRESHOLD
>> + * @snrlint: SNR Detect Low.
>> + * true - Indicatedes that the value is below
>> + * FM_RSQ_SNR_LOW_THRESHOLD
>> + * false - Indicatedes that the value is above
>> + * FM_RSQ_SNR_LOW_THRESHOLD
>> + * @rssihint: RSSI Detect High.
>> + * true - Indicatedes that the value is below
>> + * FM_RSQ_RSSI_HIGH_THRESHOLD
>> + * false - Indicatedes that the value is above
>> + * FM_RSQ_RSSI_HIGH_THRESHOLD
>> + * @rssilint: RSSI Detect Low.
>> + * true - Indicatedes that the value is below
>> + * FM_RSQ_RSSI_LOW_THRESHOLD
>> + * false - Indicatedes that the value is above
>> + * FM_RSQ_RSSI_LOW_THRESHOLD
>> + * @bltf: Band Limit.
>> + * Set if seek command hits the band limit or wrapped to
>> + * the original frequency.
>> + * @snr_ready: SNR measurement in progress.
>> + * @rssiready: RSSI measurement in progress.
>> + * @afcrl: Set if FREQOFF >= MAX_TUNE_ERROR
>> + * @valid: Set if the channel is valid
>> + * rssi < FM_VALID_RSSI_THRESHOLD
>> + * snr < FM_VALID_SNR_THRESHOLD
>> + * tune_error < FM_VALID_MAX_TUNE_ERROR
>> + * @readfreq: Current tuned frequency.
>> + * @freqoff: Signed frequency offset.
>> + * @rssi: Received Signal Strength Indicator(dBuV).
>> + * @snr: RF SNR Indicator(dB).
>> + * @lassi:
>> + * @hassi: Low/High side Adjacent(100 kHz) Channel Strength Indicator
>> + * @mult: Multipath indicator
>> + * @dev: Who knows? But values may vary.
>> + * @readantcap: Antenna tuning capacity value.
>> + * @assi: Adjacent Channel(+/- 200kHz) Strength Indicator
>> + * @usn: Ultrasonic Noise Inticator in -DBFS
>> + */
>> +struct si476x_rsq_status_report {
>> + __u8 multhint, multlint;
>> + __u8 snrhint, snrlint;
>> + __u8 rssihint, rssilint;
>> + __u8 bltf;
>> + __u8 snr_ready;
>> + __u8 rssiready;
>> + __u8 injside;
>> + __u8 afcrl;
>> + __u8 valid;
>> +
>> + __u16 readfreq;
>> + __s8 freqoff;
>> + __s8 rssi;
>> + __s8 snr;
>> + __s8 issi;
>> + __s8 lassi, hassi;
>> + __s8 mult;
>> + __u8 dev;
>> + __u16 readantcap;
>> + __s8 assi;
>> + __s8 usn;
>> +
>> + __u8 pilotdev;
>> + __u8 rdsdev;
>> + __u8 assidev;
>> + __u8 strongdev;
>> + __u16 rdspi;
>> +};
>> +
>> +/**
>> + * si476x_acf_status_report - ACF report results
>> + *
>> + * @blend_int: If set, indicates that stereo separation has crossed
>> + * below the blend threshold as set by FM_ACF_BLEND_THRESHOLD
>> + * @hblend_int: If set, indicates that HiBlend cutoff frequency is
>> + * lower than threshold as set by FM_ACF_HBLEND_THRESHOLD
>> + * @hicut_int: If set, indicates that HiCut cutoff frequency is lower
>> + * than the threshold set by ACF_
>> +
>> + */
>> +struct si476x_acf_status_report {
>> + __u8 blend_int;
>> + __u8 hblend_int;
>> + __u8 hicut_int;
>> + __u8 chbw_int;
>> + __u8 softmute_int;
>> + __u8 smute;
>> + __u8 smattn;
>> + __u8 chbw;
>> + __u8 hicut;
>> + __u8 hiblend;
>> + __u8 pilot;
>> + __u8 stblend;
>> +};
>> +
>> +enum si476x_fmagc {
>> + SI476X_FMAGC_10K_OHM = 0,
>> + SI476X_FMAGC_800_OHM = 1,
>> + SI476X_FMAGC_400_OHM = 2,
>> + SI476X_FMAGC_200_OHM = 4,
>> + SI476X_FMAGC_100_OHM = 8,
>> + SI476X_FMAGC_50_OHM = 16,
>> + SI476X_FMAGC_25_OHM = 32,
>> + SI476X_FMAGC_12P5_OHM = 64,
>> + SI476X_FMAGC_6P25_OHM = 128,
>> +};
>> +
>> +struct si476x_agc_status_report {
>> + __u8 mxhi;
>> + __u8 mxlo;
>> + __u8 lnahi;
>> + __u8 lnalo;
>> + __u8 fmagc1;
>> + __u8 fmagc2;
>> + __u8 pgagain;
>> + __u8 fmwblang;
>> +};
>> +
>> +struct si476x_rds_blockcount_report {
>> + __u16 expected;
>> + __u16 received;
>> + __u16 uncorrectable;
>> +};
>> +
>> +#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0b10000000 & (status))
>> +#define SI476X_PHDIV_STATS_MODE(status) (0b111 & (status))
>> +
>> +#define SI476X_IOC_GET_RSQ _IOWR('V', BASE_VIDIOC_PRIVATE + 0, \
>> + struct si476x_rsq_status_report)
>> +
>> +#define SI476X_IOC_SET_PHDIV_MODE _IOW('V', BASE_VIDIOC_PRIVATE + 1, \
>> + enum si476x_phase_diversity_mode)
>> +
>> +#define SI476X_IOC_GET_PHDIV_STATUS _IOWR('V', BASE_VIDIOC_PRIVATE + 2, \
>> + int)
>> +
>> +#define SI476X_IOC_GET_RSQ_PRIMARY _IOWR('V', BASE_VIDIOC_PRIVATE + 3, \
>> + struct si476x_rsq_status_report)
>> +
>> +#define SI476X_IOC_GET_ACF _IOWR('V', BASE_VIDIOC_PRIVATE + 4, \
>> + struct si476x_acf_status_report)
>> +
>> +#define SI476X_IOC_GET_AGC _IOWR('V', BASE_VIDIOC_PRIVATE + 5, \
>> + struct si476x_agc_status_report)
>> +
>> +#define SI476X_IOC_GET_RDS_BLKCNT _IOWR('V', BASE_VIDIOC_PRIVATE + 6, \
>> + struct si476x_rds_blockcount_report)
> There is no documentation at all for these private ioctls. At the very least
> these should be documentated (both the ioctl and the structs they receive).
>
> More importantly, are these ioctls really needed?
I apologize for not writing the documentation for those ioctls. I
thought I at least did so for all data structures returned by those
calls, I guess I never got around to doing it. I'll document all the
ioctls in the next version of the patch.
SI476X_IOC_SET_PHDIV_MODE, SI476X_IOC_GET_PHDIV_STATUS are definitely
needed since they are used to control antenna phase diversity modes of
the tuners. In that mode two Si4764 chips connected to different
antennas can act as a single tuner and use both signal to improve
sensibility.
The rest is useful to get different radio signal parameters from the
chip. We used it for during RF performance evaluation of the
boards(probably using it in EOL testing).
> If the purpose is to return
> status information for debugging, then you should consider implementing
> VIDIOC_LOG_STATUS instead.
For me, the problem with using VIDIOC_LOG_STATUS is that it dumps all
the debugging information in kernel log buffer, meaning that if one
wants to pass that information to some other application they would have
to resort to screen-scraping of the output of dmesg. Unfortunately the
people who were using this driver/as a part of a software suite during
aforementioned RF performance testing are not Linux-savvy enough to be
asked to use dmesg and they want a GUI solution. That small test utility
was written and it uses those those ioctls to gather and display all
signal related information. I guess the other solution for that problem
would be to create corresponding files in sysfs, but I'm not sure if
creating multitude of files in sysfs tree is a better option.
Since this version of the driver has not been integrated into our
software package the we install on laptops to do all the board testing I
guess I can remove those 'ioctl', but I would love to find acceptable
solution so that later I would be able to integrate upstream driver int
our package and not use "special" version of the driver for our purposes.
Andrey Smirnov
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
