Re: Fw: [PATCH] v4 Add support to Avermedia Twinstar double tuner in af9035

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
Let this patch be pending. I have got dual AF9035 + FC0012 device, but for some reason I haven't got it working at all. Due to that I cannot test this just now.

Biggest problem here is that it needs MxL5007T tuner changes first. This patch is currently useless as MxL5007T changes are not accepted nor commented.

regards
Antti


On 10/06/2012 05:49 PM, Mauro Carvalho Chehab wrote:
Antti,

Please review.

Thanks!
Mauro

Forwarded message:

Date: Sun, 23 Sep 2012 21:48:47 +0200
From: Jose Alberto Reguero <jareguero@xxxxxxxxxxxxxx>
To: linux-media@xxxxxxxxxxxxxxx
Cc: Antti Palosaari <crope@xxxxxx>
Subject: [PATCH] v4 Add support to Avermedia Twinstar double tuner in af9035


This patch add support to the Avermedia Twinstar double tuner in the af9035
driver. Version 4 of the patch. I split the patch as suggested by Antti. I send
the changes to mxl5007 driver in another patch.

Signed-off-by: Jose Alberto Reguero <jareguero@xxxxxxxxxxxxxx>

Jose Alberto

diff -upr linux/drivers/media/dvb-frontends/af9033.c linux.new/drivers/media/dvb-frontends/af9033.c
--- linux/drivers/media/dvb-frontends/af9033.c	2012-08-14 05:45:22.000000000 +0200
+++ linux.new/drivers/media/dvb-frontends/af9033.c	2012-09-13 22:22:29.012301231 +0200
@@ -326,6 +326,18 @@ static int af9033_init(struct dvb_fronte
  			goto err;
  	}

+	if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) {
+		ret = af9033_wr_reg_mask(state, 0x00d91c, 0x01, 0x01);
+		if (ret < 0)
+			goto err;
+		ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01);
+		if (ret < 0)
+			goto err;
+		ret = af9033_wr_reg_mask(state, 0x00d916, 0x00, 0x01);
+		if (ret < 0)
+			goto err;
+	}
+
  	state->bandwidth_hz = 0; /* force to program all parameters */

  	return 0;
diff -upr linux/drivers/media/usb/dvb-usb-v2/af9035.c linux.new/drivers/media/usb/dvb-usb-v2/af9035.c
--- linux/drivers/media/usb/dvb-usb-v2/af9035.c	2012-08-16 05:45:24.000000000 +0200
+++ linux.new/drivers/media/usb/dvb-usb-v2/af9035.c	2012-09-23 21:32:10.313657063 +0200
@@ -209,10 +209,14 @@ static int af9035_i2c_master_xfer(struct
  		if (msg[0].len > 40 || msg[1].len > 40) {
  			/* TODO: correct limits > 40 */
  			ret = -EOPNOTSUPP;
-		} else if (msg[0].addr == state->af9033_config[0].i2c_addr) {
+		} else if ((msg[0].addr == state->af9033_config[0].i2c_addr) ||
+			   (msg[0].addr == state->af9033_config[1].i2c_addr)) {
  			/* integrated demod */
  			u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 |
  					msg[0].buf[2];
+			if (state->af9033_config[1].i2c_addr &&
+			   (msg[0].addr == state->af9033_config[1].i2c_addr))
+				reg |= 0x100000;
  			ret = af9035_rd_regs(d, reg, &msg[1].buf[0],
  					msg[1].len);
  		} else {
@@ -220,8 +224,9 @@ static int af9035_i2c_master_xfer(struct
  			u8 buf[5 + msg[0].len];
  			struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf),
  					buf, msg[1].len, msg[1].buf };
+			req.mbox |= ((msg[0].addr & 0x80)  >>  3);
  			buf[0] = msg[1].len;
-			buf[1] = msg[0].addr << 1;
+			buf[1] = (u8)(msg[0].addr << 1);
  			buf[2] = 0x00; /* reg addr len */
  			buf[3] = 0x00; /* reg addr MSB */
  			buf[4] = 0x00; /* reg addr LSB */
@@ -232,10 +237,14 @@ static int af9035_i2c_master_xfer(struct
  		if (msg[0].len > 40) {
  			/* TODO: correct limits > 40 */
  			ret = -EOPNOTSUPP;
-		} else if (msg[0].addr == state->af9033_config[0].i2c_addr) {
+		} else if ((msg[0].addr == state->af9033_config[0].i2c_addr) ||
+			   (msg[0].addr == state->af9033_config[1].i2c_addr)) {
  			/* integrated demod */
  			u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 |
  					msg[0].buf[2];
+			if (state->af9033_config[1].i2c_addr &&
+			   (msg[0].addr == state->af9033_config[1].i2c_addr))
+				reg |= 0x100000;
  			ret = af9035_wr_regs(d, reg, &msg[0].buf[3],
  					msg[0].len - 3);
  		} else {
@@ -243,8 +252,9 @@ static int af9035_i2c_master_xfer(struct
  			u8 buf[5 + msg[0].len];
  			struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf,
  					0, NULL };
+			req.mbox |= ((msg[0].addr & 0x80)  >>  3);
  			buf[0] = msg[0].len;
-			buf[1] = msg[0].addr << 1;
+			buf[1] = (u8)(msg[0].addr << 1);
  			buf[2] = 0x00; /* reg addr len */
  			buf[3] = 0x00; /* reg addr MSB */
  			buf[4] = 0x00; /* reg addr LSB */
@@ -283,9 +293,30 @@ static int af9035_identify_state(struct
  	int ret;
  	u8 wbuf[1] = { 1 };
  	u8 rbuf[4];
+	u8 tmp;
  	struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf,
  			sizeof(rbuf), rbuf };

+	/* check if there is dual tuners */
+	ret = af9035_rd_reg(d, EEPROM_DUAL_MODE, &tmp);
+	if (ret < 0)
+		goto err;
+
+	if (tmp) {
+		/* read 2nd demodulator I2C address */
+		ret = af9035_rd_reg(d, EEPROM_2WIREADDR, &tmp);
+		if (ret < 0)
+			goto err;
+
+		ret = af9035_wr_reg(d, 0x00417f, tmp);
+		if (ret < 0)
+			goto err;
+
+		ret = af9035_wr_reg(d, 0x00d81a, 1);
+		if (ret < 0)
+			goto err;
+	}
+
  	ret = af9035_ctrl_msg(d, &req);
  	if (ret < 0)
  		goto err;
@@ -492,7 +523,14 @@ static int af9035_read_config(struct dvb

  	state->dual_mode = tmp;
  	pr_debug("%s: dual mode=%d\n", __func__, state->dual_mode);
-
+	if (state->dual_mode) {
+		/* read 2nd demodulator I2C address */
+		ret = af9035_rd_reg(d, EEPROM_2WIREADDR, &tmp);
+		if (ret < 0)
+			goto err;
+		state->af9033_config[1].i2c_addr = tmp;
+		pr_debug("%s: 2nd demod I2C addr:%02x\n", __func__, tmp);
+	}
  	for (i = 0; i < state->dual_mode + 1; i++) {
  		/* tuner */
  		ret = af9035_rd_reg(d, EEPROM_1_TUNER_ID + eeprom_shift, &tmp);
@@ -671,6 +709,12 @@ static int af9035_frontend_callback(void
  	return -EINVAL;
  }

+static int af9035_get_adapter_count(struct dvb_usb_device *d)
+{
+	struct state *state = d_to_priv(d);
+	return state->dual_mode + 1;
+}
+
  static int af9035_frontend_attach(struct dvb_usb_adapter *adap)
  {
  	struct state *state = adap_to_priv(adap);
@@ -726,13 +770,22 @@ static const struct fc0011_config af9035
  	.i2c_address = 0x60,
  };

-static struct mxl5007t_config af9035_mxl5007t_config = {
-	.xtal_freq_hz = MxL_XTAL_24_MHZ,
-	.if_freq_hz = MxL_IF_4_57_MHZ,
-	.invert_if = 0,
-	.loop_thru_enable = 0,
-	.clk_out_enable = 0,
-	.clk_out_amp = MxL_CLKOUT_AMP_0_94V,
+static struct mxl5007t_config af9035_mxl5007t_config[] = {
+	{
+		.xtal_freq_hz = MxL_XTAL_24_MHZ,
+		.if_freq_hz = MxL_IF_4_57_MHZ,
+		.invert_if = 0,
+		.loop_thru_enable = 0,
+		.clk_out_enable = 0,
+		.clk_out_amp = MxL_CLKOUT_AMP_0_94V,
+	}, {
+		.xtal_freq_hz = MxL_XTAL_24_MHZ,
+		.if_freq_hz = MxL_IF_4_57_MHZ,
+		.invert_if = 0,
+		.loop_thru_enable = 1,
+		.clk_out_enable = 1,
+		.clk_out_amp = MxL_CLKOUT_AMP_0_94V,
+	}
  };

  static struct tda18218_config af9035_tda18218_config = {
@@ -795,46 +848,52 @@ static int af9035_tuner_attach(struct dv
  				&d->i2c_adap, &af9035_fc0011_config);
  		break;
  	case AF9033_TUNER_MXL5007T:
-		ret = af9035_wr_reg(d, 0x00d8e0, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8e1, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8df, 0);
-		if (ret < 0)
-			goto err;
+		state->tuner_address[adap->id] = 0x60;
+		/* hack, use b[7] to carry used I2C-bus */
+		state->tuner_address[adap->id] |= (adap->id << 7);
+		if (adap->id == 0) {
+			ret = af9035_wr_reg(d, 0x00d8e0, 1);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8e1, 1);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8df, 0);
+			if (ret < 0)
+				goto err;

-		msleep(30);
+			msleep(30);

-		ret = af9035_wr_reg(d, 0x00d8df, 1);
-		if (ret < 0)
-			goto err;
+			ret = af9035_wr_reg(d, 0x00d8df, 1);
+			if (ret < 0)
+				goto err;

-		msleep(300);
+			msleep(300);

-		ret = af9035_wr_reg(d, 0x00d8c0, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8c1, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8bf, 0);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8b4, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8b5, 1);
-		if (ret < 0)
-			goto err;
-		ret = af9035_wr_reg(d, 0x00d8b3, 1);
-		if (ret < 0)
-			goto err;
+			ret = af9035_wr_reg(d, 0x00d8c0, 1);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8c1, 1);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8bf, 0);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8b4, 1);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8b5, 1);
+			if (ret < 0)
+				goto err;
+			ret = af9035_wr_reg(d, 0x00d8b3, 1);
+			if (ret < 0)
+				goto err;
+		}

  		/* attach tuner */
  		fe = dvb_attach(mxl5007t_attach, adap->fe[0],
-				&d->i2c_adap, 0x60, &af9035_mxl5007t_config);
+				&d->i2c_adap, state->tuner_address[adap->id],
+				&af9035_mxl5007t_config[adap->id]);
  		break;
  	case AF9033_TUNER_TDA18218:
  		/* attach tuner */
@@ -879,8 +938,8 @@ static int af9035_init(struct dvb_usb_de
  		{ 0x00dd8a, (frame_size >> 0) & 0xff, 0xff},
  		{ 0x00dd8b, (frame_size >> 8) & 0xff, 0xff},
  		{ 0x00dd0d, packet_size, 0xff },
-		{ 0x80f9a3, 0x00, 0x01 },
-		{ 0x80f9cd, 0x00, 0x01 },
+		{ 0x80f9a3, state->dual_mode, 0x01 },
+		{ 0x80f9cd, state->dual_mode, 0x01 },
  		{ 0x80f99d, 0x00, 0x01 },
  		{ 0x80f9a4, 0x00, 0x01 },
  	};
@@ -1001,7 +1060,7 @@ static const struct dvb_usb_device_prope
  	.init = af9035_init,
  	.get_rc_config = af9035_get_rc_config,

-	.num_adapters = 1,
+	.get_adapter_count = af9035_get_adapter_count,
  	.adapter = {
  		{
  			.stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188),
diff -upr linux/drivers/media/usb/dvb-usb-v2/af9035.h linux.new/drivers/media/usb/dvb-usb-v2/af9035.h
--- linux/drivers/media/usb/dvb-usb-v2/af9035.h	2012-08-14 05:45:22.000000000 +0200
+++ linux.new/drivers/media/usb/dvb-usb-v2/af9035.h	2012-09-23 21:29:45.608466128 +0200
@@ -54,6 +54,8 @@ struct state {
  	bool dual_mode;

  	struct af9033_config af9033_config[2];
+
+	u8 tuner_address[2];
  };

  u32 clock_lut[] = {
@@ -87,6 +89,7 @@ u32 clock_lut_it9135[] = {
  /* EEPROM locations */
  #define EEPROM_IR_MODE            0x430d
  #define EEPROM_DUAL_MODE          0x4326
+#define EEPROM_2WIREADDR          0x4327
  #define EEPROM_IR_TYPE            0x4329
  #define EEPROM_1_IFFREQ_L         0x432d
  #define EEPROM_1_IFFREQ_H         0x432e

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux