We currently don't select the register bank in ov2640_s_ctrl, so we can end up writing to DSP register 0x04 instead of sensor register 0x04. This happens for example when calling ov2640_s_ctrl after ov2640_s_fmt. Signed-off-by: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx> Cc: stable@xxxxxxxxxx --- drivers/media/i2c/soc_camera/ov2640.c | 5 +++++ 1 Datei geändert, 5 Zeilen hinzugefügt(+) diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c index 78ac574..d2d298b 100644 --- a/drivers/media/i2c/soc_camera/ov2640.c +++ b/drivers/media/i2c/soc_camera/ov2640.c @@ -684,6 +684,11 @@ static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl) &container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev; struct i2c_client *client = v4l2_get_subdevdata(sd); u8 val; + int ret; + + ret = i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS); + if (ret < 0) + return ret; switch (ctrl->id) { case V4L2_CID_VFLIP: -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html