Re: [PATCH] usb id addition for Terratec Cinergy T Stick Dual rev. 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/28/2012 07:34 PM, Damien Bally wrote:
  > I will NACK that initially because that USB ID already used by AF9015
driver. You have to explain / study what happens when AF9015 driver
claims that device same time.


Hi Antti

With the Cinergy stick alone, dvb_usb_af9015 is predictably loaded, but
doesn't prevent dvb_usb_it913x from working nicely.

If an afatech 9015 stick is connected, such as an AverTV Volar Black HD
(A850), it will be recognized and doesn't affect the other device.

*But* it runs into trouble if the two devices were connected at bootup,
or if the Cinergy stick is inserted after the other one :

I am not sure what you do here but let it be clear.
There is same ID used by af9015 and it913x. Both drivers are loaded when that ID appears. What I understand *both* drivers, af9015 and it913x should detect if device is correct or not. If device is af9015 then it913x should reject it with -ENODEV most likely without a I/O. If device is it913x then af9015 should reject the device similarly. And you must find out how to do that. It is not acceptable both drivers starts doing I/O for same device same time.

regards
Antti

-----------------------------------------------------------------------
[    1.264018] usb 2-1: new high speed USB device using ehci_hcd and
address 2
[    1.382487] usb 2-1: New USB device found, idVendor=0ccd, idProduct=0099
[    1.382490] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    1.382492] usb 2-1: Product: DVB-T TV Stick
[    1.382494] usb 2-1: Manufacturer: ITE Technologies, Inc.
[    1.385073] input: ITE Technologies, Inc. DVB-T TV Stick as
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.1/input/input1
[    1.385147] generic-usb 0003:0CCD:0099.0001: input,hidraw0: USB HID
v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on
usb-0000:00:1d.7-1 input1
[    5.045527] usbcore: registered new interface driver dvb_usb_it913x
[    5.147276] it913x: Chip Version=01 Chip Type=9135
[    5.147524] it913x: Firmware Version 33684956
[    5.148649] it913x: Remote HID mode NOT SUPPORTED
[    5.149024] it913x: Dual mode=3 Tuner Type=0
[    5.149028] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in
warm state
[    5.149077] usb 2-1: dvb_usbv2: will pass the complete MPEG2
transport stream to the software demuxer
[    5.149307] DVB: registering new adapter (ITE 9135(9006) Generic)
[    5.174907] usb 1-4: dvb_usbv2: downloading firmware from file
'dvb-usb-af9015.fw'
[    5.241934] usb 1-4: dvb_usbv2: found a 'AverMedia AVerTV Volar Black
HD (A850)' in warm state
[    5.614827] usb 1-4: dvb_usbv2: will pass the complete MPEG2
transport stream to the software demuxer
[    5.614866] DVB: registering new adapter (AverMedia AVerTV Volar
Black HD (A850))
[    5.710026] af9013: firmware version 4.95.0.0
[    5.712151] DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[    5.813139] MXL5005S: Attached at address 0xc6
[    5.818896] usb 1-4: dvb_usbv2: 'AverMedia AVerTV Volar Black HD
(A850)' successfully initialized and connected
[    7.266161] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[    7.266247] it913x-fe: ADF table value    :00
[    9.267200] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[   11.267153] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[   13.267250] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[   15.267089] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[   17.267162] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[   19.267139] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[   19.267218] it913x-fe: Crystal Frequency :12000000 Adc Frequency
:20250000 ADC X2: 01
[   19.267296] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' error while
loading driver (-19)
[   19.267472] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' successfully
deinitialized and disconnected
-----------------------------------------------------------------------

I'm unfortunately not able to rewrite the driver, but I'm willing to
provide any information about the device to help its correct
identification. Here is what lsusb yields :
-----------------------------------------------------------------------
Bus 002 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               2.00
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0        64
   idVendor           0x0ccd TerraTec Electronic GmbH
   idProduct          0x0099
   bcdDevice            2.00
   iManufacturer           1 ITE Technologies, Inc.
   iProduct                2 DVB-T TV Stick
   iSerial                 0
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           71
     bNumInterfaces          2
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0x80
       (Bus Powered)
     MaxPower              500mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           4
       bInterfaceClass       255 Vendor Specific Class
       bInterfaceSubClass      0
       bInterfaceProtocol      0
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x02  EP 2 OUT
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x84  EP 4 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x85  EP 5 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               0
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        1
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      0 No Subclass
       bInterfaceProtocol      1 Keyboard
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.01
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      65
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x83  EP 3 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0040  1x 64 bytes
         bInterval              10
Device Qualifier (for other device speed):
   bLength                10
   bDescriptorType         6
   bcdUSB               2.00
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0        64
   bNumConfigurations      1
Device Status:     0x0000
   (Bus Powered)

Hope that helps...

Damien


--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux