> I will NACK that initially because that USB ID already used by AF9015
driver. You have to explain / study what happens when AF9015 driver
claims that device same time.
Hi Antti
With the Cinergy stick alone, dvb_usb_af9015 is predictably loaded, but
doesn't prevent dvb_usb_it913x from working nicely.
If an afatech 9015 stick is connected, such as an AverTV Volar Black HD
(A850), it will be recognized and doesn't affect the other device.
*But* it runs into trouble if the two devices were connected at bootup,
or if the Cinergy stick is inserted after the other one :
-----------------------------------------------------------------------
[ 1.264018] usb 2-1: new high speed USB device using ehci_hcd and
address 2
[ 1.382487] usb 2-1: New USB device found, idVendor=0ccd, idProduct=0099
[ 1.382490] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.382492] usb 2-1: Product: DVB-T TV Stick
[ 1.382494] usb 2-1: Manufacturer: ITE Technologies, Inc.
[ 1.385073] input: ITE Technologies, Inc. DVB-T TV Stick as
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.1/input/input1
[ 1.385147] generic-usb 0003:0CCD:0099.0001: input,hidraw0: USB HID
v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on
usb-0000:00:1d.7-1 input1
[ 5.045527] usbcore: registered new interface driver dvb_usb_it913x
[ 5.147276] it913x: Chip Version=01 Chip Type=9135
[ 5.147524] it913x: Firmware Version 33684956
[ 5.148649] it913x: Remote HID mode NOT SUPPORTED
[ 5.149024] it913x: Dual mode=3 Tuner Type=0
[ 5.149028] usb 2-1: dvb_usbv2: found a 'ITE 9135(9006) Generic' in
warm state
[ 5.149077] usb 2-1: dvb_usbv2: will pass the complete MPEG2
transport stream to the software demuxer
[ 5.149307] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 5.174907] usb 1-4: dvb_usbv2: downloading firmware from file
'dvb-usb-af9015.fw'
[ 5.241934] usb 1-4: dvb_usbv2: found a 'AverMedia AVerTV Volar Black
HD (A850)' in warm state
[ 5.614827] usb 1-4: dvb_usbv2: will pass the complete MPEG2
transport stream to the software demuxer
[ 5.614866] DVB: registering new adapter (AverMedia AVerTV Volar
Black HD (A850))
[ 5.710026] af9013: firmware version 4.95.0.0
[ 5.712151] DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 5.813139] MXL5005S: Attached at address 0xc6
[ 5.818896] usb 1-4: dvb_usbv2: 'AverMedia AVerTV Volar Black HD
(A850)' successfully initialized and connected
[ 7.266161] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 7.266247] it913x-fe: ADF table value :00
[ 9.267200] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 11.267153] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 13.267250] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 15.267089] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 17.267162] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 19.267139] usb 2-1: dvb_usbv2: 2nd usb_bulk_msg() failed=-110
[ 19.267218] it913x-fe: Crystal Frequency :12000000 Adc Frequency
:20250000 ADC X2: 01
[ 19.267296] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' error while
loading driver (-19)
[ 19.267472] usb 2-1: dvb_usbv2: 'ITE 9135(9006) Generic' successfully
deinitialized and disconnected
-----------------------------------------------------------------------
I'm unfortunately not able to rewrite the driver, but I'm willing to
provide any information about the device to help its correct
identification. Here is what lsusb yields :
-----------------------------------------------------------------------
Bus 002 Device 003: ID 0ccd:0099 TerraTec Electronic GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0ccd TerraTec Electronic GmbH
idProduct 0x0099
bcdDevice 2.00
iManufacturer 1 ITE Technologies, Inc.
iProduct 2 DVB-T TV Stick
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 71
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Hope that helps...
Damien
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
