Em Fri, 17 Aug 2012 04:35:08 +0300 Antti Palosaari <crope@xxxxxx> escreveu: > Make LNA run-time switching possible for PCTV nanoStick T2 290e! > > Signed-off-by: Antti Palosaari <crope@xxxxxx> > --- > drivers/media/usb/em28xx/em28xx-dvb.c | 40 ++++++++++++++++++++++++++++++----- > 1 file changed, 35 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c > index 34c5ea9..75f907a 100644 > --- a/drivers/media/usb/em28xx/em28xx-dvb.c > +++ b/drivers/media/usb/em28xx/em28xx-dvb.c > @@ -81,6 +81,7 @@ struct em28xx_dvb { > int (*gate_ctrl)(struct dvb_frontend *, int); > struct semaphore pll_mutex; > bool dont_attach_fe1; > + int gpio; Please, don't call it simply as "gpio". There are 12 GPIO pins at em28xx devices, used by tuners, demods, IR's, LED's, etc. Instead, you should associate it with its function. I would call it as "lna_gpio" (or something like that). > }; > > > @@ -568,6 +569,33 @@ static void pctv_520e_init(struct em28xx *dev) > i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); > }; > > +static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe, int val) > +{ > + struct em28xx *dev = fe->dvb->priv; > +#ifdef CONFIG_GPIOLIB > + struct em28xx_dvb *dvb = dev->dvb; > + int ret; > + unsigned long flags; > + > + if (val) > + flags = GPIOF_OUT_INIT_LOW; > + else > + flags = GPIOF_OUT_INIT_HIGH; > + > + ret = gpio_request_one(dvb->gpio, flags, NULL); > + if (ret) > + em28xx_errdev("gpio request failed %d\n", ret); > + else > + gpio_free(dvb->gpio); > + > + return ret; > +#else > + dev_warn(&dev->udev->dev, "%s: LNA control is disabled\n", > + KBUILD_MODNAME); > + return 0; > +#endif > +} > + > static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe) > { > /* Values extracted from a USB trace of the Terratec Windows driver */ > @@ -809,7 +837,7 @@ static void em28xx_unregister_dvb(struct em28xx_dvb *dvb) > > static int em28xx_dvb_init(struct em28xx *dev) > { > - int result = 0, mfe_shared = 0, gpio_chip_base; > + int result = 0, mfe_shared = 0; > struct em28xx_dvb *dvb; > > if (!dev->board.has_dvb) { > @@ -958,7 +986,7 @@ static int em28xx_dvb_init(struct em28xx *dev) > dvb->fe[0] = dvb_attach(cxd2820r_attach, > &em28xx_cxd2820r_config, > &dev->i2c_adap, > - &gpio_chip_base); > + &dvb->gpio); > if (dvb->fe[0]) { > /* FE 0 attach tuner */ > if (!dvb_attach(tda18271_attach, > @@ -973,15 +1001,17 @@ static int em28xx_dvb_init(struct em28xx *dev) > } > } > > +#ifdef CONFIG_GPIOLIB > /* enable LNA for DVB-T, DVB-T2 and DVB-C */ > - result = gpio_request_one(gpio_chip_base, GPIOF_INIT_LOW, > - "LNA"); > + result = gpio_request_one(dvb->gpio, GPIOF_OUT_INIT_LOW, NULL); > if (result) > em28xx_errdev("gpio request failed %d\n", result); > else > - gpio_free(gpio_chip_base); > + gpio_free(dvb->gpio); > > result = 0; /* continue even set LNA fails */ > +#endif > + dvb->fe[0]->ops.set_lna = em28xx_pctv_290e_set_lna; > break; > case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: > { -- Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html