Hi, Have anyone out there tested the CT-3650 USB driver in the Linux kernel with a "strong pairing cam". According to some web-forums, the hardware should support that given using the vendor provided DVB WinXXX software. drivers/media/dvb/dvb-usb/ttusb2.c Any clues how to debug or what can be wrong? When inserting the CAM, VDR says that a CAM is present, but then after a while no CAM is present. Log: ttusb2: tt3650_ci_slot_reset 0 ttusb2: tt3650_ci_read_attribute_mem 0000 -> 0 0x00 ttusb2: tt3650_ci_read_attribute_mem 0002 -> 0 0x00 TUPLE type:0x0 length:0 dvb_ca adapter 0: Invalid PC card inserted :( dvb_ca_en50221_io_open dvb_ca_en50221_thread_wakeup dvb_ca_en50221_io_do_ioctl dvb_ca_en50221_io_do_ioctl dvb_ca_en50221_slot_shutdown ttusb2: tt3650_ci_set_video_port 0 0 Slot 0 shutdown dvb_ca_en50221_thread_wakeup dvb_ca_en50221_io_poll ttusb2: tt3650_ci_slot_reset 0 dvb_ca_en50221_io_do_ioctl dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll dvb_ca_en50221_io_poll ttusb2: tt3650_ci_read_attribute_mem 0000 -> 0 0x1d ttusb2: tt3650_ci_read_attribute_mem 0002 -> 0 0x04 TUPLE type:0x1d length:4 ttusb2: tt3650_ci_read_attribute_mem 0004 -> 0 0x00 0x00: 0x00 . ttusb2: tt3650_ci_read_attribute_mem 0006 -> 0 0xdb 0x01: 0xdb . ttusb2: tt3650_ci_read_attribute_mem 0008 -> 0 0x08 0x02: 0x08 . ttusb2: tt3650_ci_read_attribute_mem 000a -> 0 0xff 0x03: 0xff . dvb_ca adapter 0: Invalid PC card inserted :( dvb_ca_en50221_io_do_ioctl --HPS -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
