Hi Federico!
A few small remarks:
On Wed July 11 2012 04:34:46 Federico Vaga wrote:
> Signed-off-by: Federico Vaga <federico.vaga@xxxxxxxxx>
> ---
> drivers/media/video/adv7180.c | 221 +++++++++++++++++------------------------
> 1 file changed, 90 insertions(+), 131 deletions(-)
>
> diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
> index 174bffa..7705456 100644
> --- a/drivers/media/video/adv7180.c
> +++ b/drivers/media/video/adv7180.c
> @@ -26,11 +26,10 @@
> #include <media/v4l2-ioctl.h>
> #include <linux/videodev2.h>
> #include <media/v4l2-device.h>
> +#include <media/v4l2-ctrls.h>
> #include <media/v4l2-chip-ident.h>
> #include <linux/mutex.h>
>
> -#define DRIVER_NAME "adv7180"
> -
> #define ADV7180_INPUT_CONTROL_REG 0x00
> #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00
> #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
> @@ -55,21 +54,21 @@
>
> #define ADV7180_AUTODETECT_ENABLE_REG 0x07
> #define ADV7180_AUTODETECT_DEFAULT 0x7f
> -
> +/* Contrast */
> #define ADV7180_CON_REG 0x08 /*Unsigned */
> -#define CON_REG_MIN 0
> -#define CON_REG_DEF 128
> -#define CON_REG_MAX 255
> -
> +#define ADV7180_CON_MIN 0
> +#define ADV7180_CON_DEF 128
> +#define ADV7180_CON_MAX 255
> +/* Brightness*/
> #define ADV7180_BRI_REG 0x0a /*Signed */
> -#define BRI_REG_MIN -128
> -#define BRI_REG_DEF 0
> -#define BRI_REG_MAX 127
> -
> +#define ADV7180_BRI_MIN -128
> +#define ADV7180_BRI_DEF 0
> +#define ADV7180_BRI_MAX 127
> +/* Hue */
> #define ADV7180_HUE_REG 0x0b /*Signed, inverted */
> -#define HUE_REG_MIN -127
> -#define HUE_REG_DEF 0
> -#define HUE_REG_MAX 128
> +#define ADV7180_HUE_MIN -127
> +#define ADV7180_HUE_DEF 0
> +#define ADV7180_HUE_MAX 128
>
> #define ADV7180_ADI_CTRL_REG 0x0e
> #define ADV7180_ADI_CTRL_IRQ_SPACE 0x20
> @@ -98,12 +97,12 @@
> #define ADV7180_ICONF1_ACTIVE_LOW 0x01
> #define ADV7180_ICONF1_PSYNC_ONLY 0x10
> #define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0
> -
> +/* Saturation */
> #define ADV7180_SD_SAT_CB_REG 0xe3 /*Unsigned */
> #define ADV7180_SD_SAT_CR_REG 0xe4 /*Unsigned */
> -#define SAT_REG_MIN 0
> -#define SAT_REG_DEF 128
> -#define SAT_REG_MAX 255
> +#define ADV7180_SAT_MIN 0
> +#define ADV7180_SAT_DEF 128
> +#define ADV7180_SAT_MAX 255
>
> #define ADV7180_IRQ1_LOCK 0x01
> #define ADV7180_IRQ1_UNLOCK 0x02
> @@ -121,18 +120,18 @@
> #define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND 0x4F
>
> struct adv7180_state {
> + struct v4l2_ctrl_handler ctrl_hdl;
> struct v4l2_subdev sd;
> struct work_struct work;
> struct mutex mutex; /* mutual excl. when accessing chip */
> int irq;
> v4l2_std_id curr_norm;
> bool autodetect;
> - s8 brightness;
> - s16 hue;
> - u8 contrast;
> - u8 saturation;
> u8 input;
> };
> +#define to_adv7180_sd(_ctrl) &container_of(_ctrl->handler, \
> + struct adv7180_state, \
> + ctrl_hdl)->sd
>
> static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
> {
> @@ -237,7 +236,7 @@ static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
> if (ret)
> return ret;
>
> - /*We cannot discriminate between LQFP and 40-pin LFCSP, so accept
> + /* We cannot discriminate between LQFP and 40-pin LFCSP, so accept
> * all inputs and let the card driver take care of validation
> */
> if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
> @@ -316,117 +315,39 @@ out:
> return ret;
> }
>
> -static int adv7180_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
> -{
> - switch (qc->id) {
> - case V4L2_CID_BRIGHTNESS:
> - return v4l2_ctrl_query_fill(qc, BRI_REG_MIN, BRI_REG_MAX,
> - 1, BRI_REG_DEF);
> - case V4L2_CID_HUE:
> - return v4l2_ctrl_query_fill(qc, HUE_REG_MIN, HUE_REG_MAX,
> - 1, HUE_REG_DEF);
> - case V4L2_CID_CONTRAST:
> - return v4l2_ctrl_query_fill(qc, CON_REG_MIN, CON_REG_MAX,
> - 1, CON_REG_DEF);
> - case V4L2_CID_SATURATION:
> - return v4l2_ctrl_query_fill(qc, SAT_REG_MIN, SAT_REG_MAX,
> - 1, SAT_REG_DEF);
> - default:
> - break;
> - }
> -
> - return -EINVAL;
> -}
> -
> -static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> -{
> - struct adv7180_state *state = to_state(sd);
> - int ret = mutex_lock_interruptible(&state->mutex);
> - if (ret)
> - return ret;
> -
> - switch (ctrl->id) {
> - case V4L2_CID_BRIGHTNESS:
> - ctrl->value = state->brightness;
> - break;
> - case V4L2_CID_HUE:
> - ctrl->value = state->hue;
> - break;
> - case V4L2_CID_CONTRAST:
> - ctrl->value = state->contrast;
> - break;
> - case V4L2_CID_SATURATION:
> - ctrl->value = state->saturation;
> - break;
> - default:
> - ret = -EINVAL;
> - }
> -
> - mutex_unlock(&state->mutex);
> - return ret;
> -}
> -
> -static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> +static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
> {
> + struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
> struct adv7180_state *state = to_state(sd);
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> int ret = mutex_lock_interruptible(&state->mutex);
> + int val;
> +
> if (ret)
> return ret;
> -
> + val = ctrl->val;
> switch (ctrl->id) {
> case V4L2_CID_BRIGHTNESS:
> - if ((ctrl->value > BRI_REG_MAX)
> - || (ctrl->value < BRI_REG_MIN)) {
> - ret = -ERANGE;
> - break;
> - }
> - state->brightness = ctrl->value;
> - ret = i2c_smbus_write_byte_data(client,
> - ADV7180_BRI_REG,
> - state->brightness);
> + ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
> break;
> case V4L2_CID_HUE:
> - if ((ctrl->value > HUE_REG_MAX)
> - || (ctrl->value < HUE_REG_MIN)) {
> - ret = -ERANGE;
> - break;
> - }
> - state->hue = ctrl->value;
> /*Hue is inverted according to HSL chart */
> - ret = i2c_smbus_write_byte_data(client,
> - ADV7180_HUE_REG, -state->hue);
> + ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
> break;
> case V4L2_CID_CONTRAST:
> - if ((ctrl->value > CON_REG_MAX)
> - || (ctrl->value < CON_REG_MIN)) {
> - ret = -ERANGE;
> - break;
> - }
> - state->contrast = ctrl->value;
> - ret = i2c_smbus_write_byte_data(client,
> - ADV7180_CON_REG,
> - state->contrast);
> + ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
> break;
> case V4L2_CID_SATURATION:
> - if ((ctrl->value > SAT_REG_MAX)
> - || (ctrl->value < SAT_REG_MIN)) {
> - ret = -ERANGE;
> - break;
> - }
> /*
> *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
> *Let's not confuse the user, everybody understands saturation
> */
> - state->saturation = ctrl->value;
> - ret = i2c_smbus_write_byte_data(client,
> - ADV7180_SD_SAT_CB_REG,
> - state->saturation);
> + ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
> + val);
> if (ret < 0)
> break;
> - ret = i2c_smbus_write_byte_data(client,
> - ADV7180_SD_SAT_CR_REG,
> - state->saturation);
> + ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
> + val);
> break;
> default:
> ret = -EINVAL;
> @@ -436,6 +357,42 @@ static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
> return ret;
> }
>
> +static const struct v4l2_ctrl_ops adv7180_ctrl_ops = {
> + .s_ctrl = adv7180_s_ctrl,
> +};
> +
> +static int adv7180_init_controls(struct adv7180_state *state)
> +{
> + v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
2 -> 4, since there are 4 controls. It's a hint only, but it helps optimizing
the internal hash data structure.
> +
> + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> + V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN,
> + ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF);
> + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> + V4L2_CID_CONTRAST, ADV7180_CON_MIN,
> + ADV7180_CON_MAX, 1, ADV7180_CON_DEF);
> + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> + V4L2_CID_SATURATION, ADV7180_SAT_MIN,
> + ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF);
> + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
> + V4L2_CID_HUE, ADV7180_HUE_MIN,
> + ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF);
> + state->sd.ctrl_handler = &state->ctrl_hdl;
> + if (state->ctrl_hdl.error) {
> + int err = state->ctrl_hdl.error;
> +
> + v4l2_ctrl_handler_free(&state->ctrl_hdl);
> + return err;
> + }
> + v4l2_ctrl_handler_setup(&state->ctrl_hdl);
> +
> + return 0;
> +}
> +static void adv7180_exit_controls(struct adv7180_state *state)
> +{
> + v4l2_ctrl_handler_free(&state->ctrl_hdl);
> +}
> +
> static const struct v4l2_subdev_video_ops adv7180_video_ops = {
> .querystd = adv7180_querystd,
> .g_input_status = adv7180_g_input_status,
> @@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = {
> static const struct v4l2_subdev_core_ops adv7180_core_ops = {
> .g_chip_ident = adv7180_g_chip_ident,
> .s_std = adv7180_s_std,
> - .queryctrl = adv7180_queryctrl,
> - .g_ctrl = adv7180_g_ctrl,
> - .s_ctrl = adv7180_s_ctrl,
> + .queryctrl = v4l2_subdev_queryctrl,
> + .g_ctrl = v4l2_subdev_g_ctrl,
> + .s_ctrl = v4l2_subdev_s_ctrl,
If adv7180 is currently *only* used by bridge/platform drivers that also use
the control framework, then you can remove queryctrl/g/s_ctrl altogether.
> };
>
> static const struct v4l2_subdev_ops adv7180_ops = {
> @@ -539,7 +496,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
>
> /* register for interrupts */
> if (state->irq > 0) {
> - ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
> + ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
> state);
> if (ret)
> return ret;
> @@ -582,26 +539,27 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
>
> /*Set default value for controls */
> ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG,
> - state->brightness);
> + ADV7180_BRI_DEF);
> if (ret < 0)
> return ret;
>
> - ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, state->hue);
> + ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
> + ADV7180_HUE_DEF);
It shouldn't be necessary to initialize the controls since v4l2_ctrl_handler_setup
does that for you already.
> if (ret < 0)
> return ret;
>
> ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG,
> - state->contrast);
> + ADV7180_CON_DEF);
> if (ret < 0)
> return ret;
>
> ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
> - state->saturation);
> + ADV7180_SAT_DEF);
> if (ret < 0)
> return ret;
>
> ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
> - state->saturation);
> + ADV7180_SAT_DEF);
> if (ret < 0)
> return ret;
>
> @@ -632,25 +590,26 @@ static __devinit int adv7180_probe(struct i2c_client *client,
> INIT_WORK(&state->work, adv7180_work);
> mutex_init(&state->mutex);
> state->autodetect = true;
> - state->brightness = BRI_REG_DEF;
> - state->hue = HUE_REG_DEF;
> - state->contrast = CON_REG_DEF;
> - state->saturation = SAT_REG_DEF;
> state->input = 0;
> sd = &state->sd;
> v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
>
> - ret = init_device(client, state);
> - if (0 != ret)
> + ret = adv7180_init_controls(state);
> + if (ret)
> goto err_unreg_subdev;
> + ret = init_device(client, state);
> + if (ret)
> + goto err_free_ctrl;
> return 0;
>
> +err_free_ctrl:
> + adv7180_exit_controls(state);
> err_unreg_subdev:
> mutex_destroy(&state->mutex);
> v4l2_device_unregister_subdev(sd);
> kfree(state);
> err:
> - printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", ret);
> + printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
> return ret;
> }
>
> @@ -678,7 +637,7 @@ static __devexit int adv7180_remove(struct i2c_client *client)
> }
>
> static const struct i2c_device_id adv7180_id[] = {
> - {DRIVER_NAME, 0},
> + {KBUILD_MODNAME, 0},
> {},
> };
>
> @@ -716,7 +675,7 @@ MODULE_DEVICE_TABLE(i2c, adv7180_id);
> static struct i2c_driver adv7180_driver = {
> .driver = {
> .owner = THIS_MODULE,
> - .name = DRIVER_NAME,
> + .name = KBUILD_MODNAME,
> },
> .probe = adv7180_probe,
> .remove = __devexit_p(adv7180_remove),
>
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
