[PATCH RFC] [media] adv7180.c: convert to v4l2 control framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Federico Vaga <federico.vaga@xxxxxxxxx>
---
 drivers/media/video/adv7180.c |  221 +++++++++++++++++------------------------
 1 file changed, 90 insertions(+), 131 deletions(-)

diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
index 174bffa..7705456 100644
--- a/drivers/media/video/adv7180.c
+++ b/drivers/media/video/adv7180.c
@@ -26,11 +26,10 @@
 #include <media/v4l2-ioctl.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-chip-ident.h>
 #include <linux/mutex.h>
 
-#define DRIVER_NAME "adv7180"
-
 #define ADV7180_INPUT_CONTROL_REG			0x00
 #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM	0x00
 #define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
@@ -55,21 +54,21 @@
 
 #define ADV7180_AUTODETECT_ENABLE_REG			0x07
 #define ADV7180_AUTODETECT_DEFAULT			0x7f
-
+/* Contrast */
 #define ADV7180_CON_REG		0x08	/*Unsigned */
-#define CON_REG_MIN		0
-#define CON_REG_DEF		128
-#define CON_REG_MAX		255
-
+#define ADV7180_CON_MIN		0
+#define ADV7180_CON_DEF		128
+#define ADV7180_CON_MAX		255
+/* Brightness*/
 #define ADV7180_BRI_REG		0x0a	/*Signed */
-#define BRI_REG_MIN		-128
-#define BRI_REG_DEF		0
-#define BRI_REG_MAX		127
-
+#define ADV7180_BRI_MIN		-128
+#define ADV7180_BRI_DEF		0
+#define ADV7180_BRI_MAX		127
+/* Hue */
 #define ADV7180_HUE_REG		0x0b	/*Signed, inverted */
-#define HUE_REG_MIN		-127
-#define HUE_REG_DEF		0
-#define HUE_REG_MAX		128
+#define ADV7180_HUE_MIN		-127
+#define ADV7180_HUE_DEF		0
+#define ADV7180_HUE_MAX		128
 
 #define ADV7180_ADI_CTRL_REG				0x0e
 #define ADV7180_ADI_CTRL_IRQ_SPACE			0x20
@@ -98,12 +97,12 @@
 #define ADV7180_ICONF1_ACTIVE_LOW	0x01
 #define ADV7180_ICONF1_PSYNC_ONLY	0x10
 #define ADV7180_ICONF1_ACTIVE_TO_CLR	0xC0
-
+/* Saturation */
 #define ADV7180_SD_SAT_CB_REG	0xe3	/*Unsigned */
 #define ADV7180_SD_SAT_CR_REG	0xe4	/*Unsigned */
-#define SAT_REG_MIN		0
-#define SAT_REG_DEF		128
-#define SAT_REG_MAX		255
+#define ADV7180_SAT_MIN		0
+#define ADV7180_SAT_DEF		128
+#define ADV7180_SAT_MAX		255
 
 #define ADV7180_IRQ1_LOCK	0x01
 #define ADV7180_IRQ1_UNLOCK	0x02
@@ -121,18 +120,18 @@
 #define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND	0x4F
 
 struct adv7180_state {
+	struct v4l2_ctrl_handler ctrl_hdl;
 	struct v4l2_subdev	sd;
 	struct work_struct	work;
 	struct mutex		mutex; /* mutual excl. when accessing chip */
 	int			irq;
 	v4l2_std_id		curr_norm;
 	bool			autodetect;
-	s8			brightness;
-	s16			hue;
-	u8			contrast;
-	u8			saturation;
 	u8			input;
 };
+#define to_adv7180_sd(_ctrl) &container_of(_ctrl->handler,		\
+					   struct adv7180_state,	\
+					   ctrl_hdl)->sd
 
 static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
 {
@@ -237,7 +236,7 @@ static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
 	if (ret)
 		return ret;
 
-	/*We cannot discriminate between LQFP and 40-pin LFCSP, so accept
+	/* We cannot discriminate between LQFP and 40-pin LFCSP, so accept
 	 * all inputs and let the card driver take care of validation
 	 */
 	if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
@@ -316,117 +315,39 @@ out:
 	return ret;
 }
 
-static int adv7180_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, BRI_REG_MIN, BRI_REG_MAX,
-					    1, BRI_REG_DEF);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, HUE_REG_MIN, HUE_REG_MAX,
-					    1, HUE_REG_DEF);
-	case V4L2_CID_CONTRAST:
-		return v4l2_ctrl_query_fill(qc, CON_REG_MIN, CON_REG_MAX,
-					    1, CON_REG_DEF);
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, SAT_REG_MIN, SAT_REG_MAX,
-					    1, SAT_REG_DEF);
-	default:
-		break;
-	}
-
-	return -EINVAL;
-}
-
-static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct adv7180_state *state = to_state(sd);
-	int ret = mutex_lock_interruptible(&state->mutex);
-	if (ret)
-		return ret;
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = state->brightness;
-		break;
-	case V4L2_CID_HUE:
-		ctrl->value = state->hue;
-		break;
-	case V4L2_CID_CONTRAST:
-		ctrl->value = state->contrast;
-		break;
-	case V4L2_CID_SATURATION:
-		ctrl->value = state->saturation;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mutex_unlock(&state->mutex);
-	return ret;
-}
-
-static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
 	struct adv7180_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	int ret = mutex_lock_interruptible(&state->mutex);
+	int val;
+
 	if (ret)
 		return ret;
-
+	val = ctrl->val;
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		if ((ctrl->value > BRI_REG_MAX)
-		    || (ctrl->value < BRI_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
-		state->brightness = ctrl->value;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_BRI_REG,
-						state->brightness);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
 		break;
 	case V4L2_CID_HUE:
-		if ((ctrl->value > HUE_REG_MAX)
-		    || (ctrl->value < HUE_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
-		state->hue = ctrl->value;
 		/*Hue is inverted according to HSL chart */
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_HUE_REG, -state->hue);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
 		break;
 	case V4L2_CID_CONTRAST:
-		if ((ctrl->value > CON_REG_MAX)
-		    || (ctrl->value < CON_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
-		state->contrast = ctrl->value;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_CON_REG,
-						state->contrast);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
 		break;
 	case V4L2_CID_SATURATION:
-		if ((ctrl->value > SAT_REG_MAX)
-		    || (ctrl->value < SAT_REG_MIN)) {
-			ret = -ERANGE;
-			break;
-		}
 		/*
 		 *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
 		 *Let's not confuse the user, everybody understands saturation
 		 */
-		state->saturation = ctrl->value;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_SD_SAT_CB_REG,
-						state->saturation);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
+						val);
 		if (ret < 0)
 			break;
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_SD_SAT_CR_REG,
-						state->saturation);
+		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
+						val);
 		break;
 	default:
 		ret = -EINVAL;
@@ -436,6 +357,42 @@ static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return ret;
 }
 
+static const struct v4l2_ctrl_ops adv7180_ctrl_ops = {
+	.s_ctrl = adv7180_s_ctrl,
+};
+
+static int adv7180_init_controls(struct adv7180_state *state)
+{
+	v4l2_ctrl_handler_init(&state->ctrl_hdl, 2);
+
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN,
+			  ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF);
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_CONTRAST, ADV7180_CON_MIN,
+			  ADV7180_CON_MAX, 1, ADV7180_CON_DEF);
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_SATURATION, ADV7180_SAT_MIN,
+			  ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF);
+	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
+			  V4L2_CID_HUE, ADV7180_HUE_MIN,
+			  ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF);
+	state->sd.ctrl_handler = &state->ctrl_hdl;
+	if (state->ctrl_hdl.error) {
+		int err = state->ctrl_hdl.error;
+
+		v4l2_ctrl_handler_free(&state->ctrl_hdl);
+		return err;
+	}
+	v4l2_ctrl_handler_setup(&state->ctrl_hdl);
+
+	return 0;
+}
+static void adv7180_exit_controls(struct adv7180_state *state)
+{
+	v4l2_ctrl_handler_free(&state->ctrl_hdl);
+}
+
 static const struct v4l2_subdev_video_ops adv7180_video_ops = {
 	.querystd = adv7180_querystd,
 	.g_input_status = adv7180_g_input_status,
@@ -445,9 +402,9 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = {
 static const struct v4l2_subdev_core_ops adv7180_core_ops = {
 	.g_chip_ident = adv7180_g_chip_ident,
 	.s_std = adv7180_s_std,
-	.queryctrl = adv7180_queryctrl,
-	.g_ctrl = adv7180_g_ctrl,
-	.s_ctrl = adv7180_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
 };
 
 static const struct v4l2_subdev_ops adv7180_ops = {
@@ -539,7 +496,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
 
 	/* register for interrupts */
 	if (state->irq > 0) {
-		ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
+		ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
 				  state);
 		if (ret)
 			return ret;
@@ -582,26 +539,27 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
 
 	/*Set default value for controls */
 	ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG,
-					state->brightness);
+					ADV7180_BRI_DEF);
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, state->hue);
+	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG,
+					ADV7180_HUE_DEF);
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG,
-					state->contrast);
+					ADV7180_CON_DEF);
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
-					state->saturation);
+					ADV7180_SAT_DEF);
 	if (ret < 0)
 		return ret;
 
 	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
-					state->saturation);
+					ADV7180_SAT_DEF);
 	if (ret < 0)
 		return ret;
 
@@ -632,25 +590,26 @@ static __devinit int adv7180_probe(struct i2c_client *client,
 	INIT_WORK(&state->work, adv7180_work);
 	mutex_init(&state->mutex);
 	state->autodetect = true;
-	state->brightness = BRI_REG_DEF;
-	state->hue = HUE_REG_DEF;
-	state->contrast = CON_REG_DEF;
-	state->saturation = SAT_REG_DEF;
 	state->input = 0;
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
 
-	ret = init_device(client, state);
-	if (0 != ret)
+	ret = adv7180_init_controls(state);
+	if (ret)
 		goto err_unreg_subdev;
+	ret = init_device(client, state);
+	if (ret)
+		goto err_free_ctrl;
 	return 0;
 
+err_free_ctrl:
+	adv7180_exit_controls(state);
 err_unreg_subdev:
 	mutex_destroy(&state->mutex);
 	v4l2_device_unregister_subdev(sd);
 	kfree(state);
 err:
-	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", ret);
+	printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
 	return ret;
 }
 
@@ -678,7 +637,7 @@ static __devexit int adv7180_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id adv7180_id[] = {
-	{DRIVER_NAME, 0},
+	{KBUILD_MODNAME, 0},
 	{},
 };
 
@@ -716,7 +675,7 @@ MODULE_DEVICE_TABLE(i2c, adv7180_id);
 static struct i2c_driver adv7180_driver = {
 	.driver = {
 		   .owner = THIS_MODULE,
-		   .name = DRIVER_NAME,
+		   .name = KBUILD_MODNAME,
 		   },
 	.probe = adv7180_probe,
 	.remove = __devexit_p(adv7180_remove),
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux