I use Pinnacle DVC100 capture card on cm-t3530 card to capture analog images. cm-t3530 uses linux 2.6.32 kernel. at first the card can be correctly detected and by the cm-t3530 and generated as the device file /dev/video1. root@cm-t35:/dev# dmesg | grep em28xx em28xx 1-2.1:1.0: usb_probe_interface em28xx 1-2.1:1.0: usb_probe_interface - got id em28xx: New device Pinnacle Systems GmbH DVC100 @ 480 Mbps (2304:021a, interface 0, class 0) em28xx: Video interface 0 found em28xx #0: chip ID is em2820 (or em2710) em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 1a 02 12 00 11 03 98 10 6a 2e em28xx #0: i2c eeprom 10: 00 00 06 57 4e 00 00 00 60 00 00 00 02 00 00 00 em28xx #0: i2c eeprom 20: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00 em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 10 03 44 00 56 00 43 00 em28xx #0: i2c eeprom a0: 31 00 30 00 30 00 00 00 32 00 30 00 33 00 35 00 em28xx #0: i2c eeprom b0: 36 00 30 00 37 00 35 00 31 00 33 00 34 00 31 00 em28xx #0: i2c eeprom c0: 30 00 32 00 30 00 30 00 30 00 31 00 00 00 32 00 em28xx #0: i2c eeprom d0: 33 00 31 00 32 00 33 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 b3 d4 60 01 b3 b5 56 07 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc6a61888 em28xx #0: EEPROM info: em28xx #0:\0x09AC97 audio (5 sample rates) em28xx #0:\0x09300mA max power em28xx #0:\0x09Table at 0x06, strings=0x1098, 0x2e6a, 0x0000 em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U (card=9) saa7115 2-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x12 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.3 em28xx #0: V4L2 video device registered as video1 em28xx 1-2.1:1.1: usb_probe_interface em28xx 1-2.1:1.1: usb_probe_interface - got id em28xx audio device (2304:021a): interface 1, class 1 em28xx 1-2.1:1.2: usb_probe_interface em28xx 1-2.1:1.2: usb_probe_interface - got id em28xx audio device (2304:021a): interface 2, class 1 usbcore: registered new interface driver em28xx I use some application to capture the images by use of v4l2. now there is something wrong and the strace of the application shows the error message is "ioctl(3, VIDIOC_DQBUF, 0xbeeb4a00) = ? ERESTARTSYS (To be restarted)", while the same application can correctly capture my usb-camera images. so what can i do to solve this problem? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
