Re: PCTV 520e - DVB-C not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07.05.2012 22:44, Antti Palosaari wrote:
On 05.05.2012 15:24, Per Wetterberg wrote:

Hi,


I have problem getting the PCTV 520e to work with DVB-C on Linux. The
video output stream is full of defects.
"drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params" is
printed to the dmesg log when scanning and watching DVB-C channels.
I have no problems scanning and watching DVB-T.


On Windows 7, both DVB-T and DVB-C works fine. So I guess its not an
hardware problem or the quality of the tv signal.


I have tried the drivers that came with kernel 3.3.4 and the latest
media drivers built from source.
The dvb-demod-drxk-pctv.fw firmware file is downloaded with the
get_dvb_firmware script and copied to /lib/firmware.


I can't figure out what the problem is.
Has anyone got PCTV 520e with DVB-C to work on Linux?


I have attached some log outputs below.

You will need attenuator. I suspect it is LNA or some AGC :/ But guess
what how many times I tried to found out the reason... Feel free to hack
DRX-K driver.

Problem found. I was LNA which is always enabled. LNA is connected to the demod GPIO. I will disable it since it since it is now over gaining strong signals.

regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux