Hi, I have a Pinnacle PCTV 310i PCI DVB-T card and I have some problems with getting the IR remote working. The card identifies itself as: saa7130/34: v4l2 driver version 0, 2, 17 loaded saa7133[0]: found at 0000:02:00.0, rev: 209, irq: 16, latency: 32, mmio: 0xfe600000 saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] saa7133[0]: board init: gpio is 600e000 saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 36 74 54 ff ff saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2 saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 e6 48 c6 saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c-core: driver [tuner] using legacy suspend method i2c-core: driver [tuner] using legacy resume method tuner 12-004b: Tuner -1 found with type(s) Radio TV. tda829x 12-004b: setting tuner address to 61 tda829x 12-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 dvb_init() allocating 1 frontend DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xfe600000 irq 16 registered as card -1 The first problem is that with current 3.4.0-rc4 kernel the IR input device is not recognized with ir-kbd-i2c: : Unsupported device at address 0x47 I've found a Debian bug [1], which describes a similar problem. It has a patch attached which fixes this. I have no idea if it's correct, but it'd be nice to get it upstream if it is. With the patch applied, the IR device is detected as Registered IR keymap rc-pinnacle-color input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc1/input17 rc1: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc1 ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-12/12-0047/ir0 [saa7133[0]] However, pressing a button on a remote results (with i2c_debug=1) in the following messages saa7133[0]: i2c xfer: < 8f ERROR: NO_DEVICE i2c IR (Pinnacle PCTV)/ir: read error saa7133[0]: i2c xfer: < 8f ERROR: NO_DEVICE i2c IR (Pinnacle PCTV)/ir: read error saa7133[0]: i2c xfer: < 8f ERROR: NO_DEVICE i2c IR (Pinnacle PCTV)/ir: read error and LIRC doesn't read anything. catting the event device spits out some data after a few minutes, but i don't know if it's garbage or what. It's not usable in any case I'd much appreciate any help with this. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=617488 -- Anton Khirnov -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
