Hello,
I just finished the driver for the RTL2832 demodulator chip. The patch
contais modifications of Antti's rtl28xxu driver and a modified
version of the fc0012 driver from Hans-Frieder Vogt posted recently on
this list.
The driver as of now just implements the bare minimum to be working.
The features I plan to add next are:
- Remote control
- Signal quality readings
- Hardware PID filtering
I tested the driver with the Terratec Cinergy T Stick Black, which is
the only device supported so far.
Regrads
Thomas
>From f6f653264cdd440bcbd09323e5a3445a7bcab96a Mon Sep 17 00:00:00 2001
From: Thomas Mair <thomas.mair86@xxxxxxxxxxxxxx>
Date: Sun, 29 Apr 2012 22:51:26 +0200
Subject: [PATCH] First version of RTL2832 demod driver
Cc: Linux Media Mailing List <linux-media@xxxxxxxxxxxxxxx>
Signed-off-by: Thomas Mair <thomas.mair86@xxxxxxxxxxxxxx>
---
drivers/media/common/tuners/Kconfig | 7 +
drivers/media/common/tuners/Makefile | 1 +
drivers/media/common/tuners/fc0012-priv.h | 42 ++
drivers/media/common/tuners/fc0012.c | 384 +++++++++++++
drivers/media/common/tuners/fc0012.h | 60 ++
drivers/media/dvb/dvb-usb/Kconfig | 2 +
drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +
drivers/media/dvb/dvb-usb/rtl28xxu.c | 430 ++++++++++++---
drivers/media/dvb/frontends/Kconfig | 7 +
drivers/media/dvb/frontends/Makefile | 2 +-
drivers/media/dvb/frontends/rtl2832.c | 832 ++++++++++++++++++++++++++++
drivers/media/dvb/frontends/rtl2832.h | 300 ++++++++++
drivers/media/dvb/frontends/rtl2832_priv.h | 60 ++
13 files changed, 2060 insertions(+), 68 deletions(-)
create mode 100644 drivers/media/common/tuners/fc0012-priv.h
create mode 100644 drivers/media/common/tuners/fc0012.c
create mode 100644 drivers/media/common/tuners/fc0012.h
create mode 100644 drivers/media/dvb/frontends/rtl2832.c
create mode 100644 drivers/media/dvb/frontends/rtl2832.h
create mode 100644 drivers/media/dvb/frontends/rtl2832_priv.h
diff --git a/drivers/media/common/tuners/Kconfig
b/drivers/media/common/tuners/Kconfig
index 0fd15d9..8518251 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -211,6 +211,13 @@ config MEDIA_TUNER_FC0011
help
Fitipower FC0011 silicon tuner driver.
+config MEDIA_TUNER_FC0012
+ tristate "Fitipower FC0012 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ Fitipower FC0012 silicon tuner driver.
+
config MEDIA_TUNER_TDA18212
tristate "NXP TDA18212 silicon tuner"
depends on VIDEO_MEDIA && I2C
diff --git a/drivers/media/common/tuners/Makefile
b/drivers/media/common/tuners/Makefile
index 64ee06f..f046106 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o
obj-$(CONFIG_MEDIA_TUNER_TUA9001) += tua9001.o
obj-$(CONFIG_MEDIA_TUNER_FC0011) += fc0011.o
+obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o
ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb/frontends
diff --git a/drivers/media/common/tuners/fc0012-priv.h
b/drivers/media/common/tuners/fc0012-priv.h
new file mode 100644
index 0000000..c2c3c47
--- /dev/null
+++ b/drivers/media/common/tuners/fc0012-priv.h
@@ -0,0 +1,42 @@
+/*
+ * Fitipower FC0012 tuner driver - private includes
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _FC0012_PRIV_H_
+#define _FC0012_PRIV_H_
+
+#define LOG_PREFIX "fc0012"
+
+#undef err
+#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+struct fc0012_priv {
+ struct i2c_adapter *i2c;
+ u8 addr;
+ u8 xtal_freq;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#endif
diff --git a/drivers/media/common/tuners/fc0012.c
b/drivers/media/common/tuners/fc0012.c
new file mode 100644
index 0000000..bb9f008
--- /dev/null
+++ b/drivers/media/common/tuners/fc0012.c
@@ -0,0 +1,384 @@
+/*
+ * Fitipower FC0012 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "fc0012.h"
+#include "fc0012-priv.h"
+
+static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
+{
+ u8 buf[2] = {reg, val};
+ struct i2c_msg msg = { .addr = priv->addr, .flags = 0, .buf = buf, .len = 2 };
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->addr, .flags = 0, .buf = ®, .len = 1 },
+ { .addr = priv->addr, .flags = I2C_M_RD, .buf = val, .len = 1 },
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ err("I2C read failed, reg: %02x", reg);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int fc0012_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static int fc0012_init(struct dvb_frontend *fe)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int i, ret = 0;
+ unsigned char reg[] = {
+ 0x00, /* dummy reg. 0 */
+ 0x05, /* reg. 0x01 */
+ 0x10, /* reg. 0x02 */
+ 0x00, /* reg. 0x03 */
+ 0x00, /* reg. 0x04 */
+ 0x0f, /* reg. 0x05 CHECK: correct? */ /* this is 0x0f in RTL (CNR test) */
+ 0x00, /* reg. 0x06: divider 2, VCO slow */
+ 0x00, /* reg. 0x07 */ /* this is also different in RTL code */
+ 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
+ Loop Bw 1/8 */
+ 0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
+ 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
+ 0x82, /* reg. 0x0b: Output Clock is same as clock frequency */ /*
also different in RTL*/
+ 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8
*/ /* RTL */
+ 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
+ 0x00, /* reg. 0x0e */
+ 0x00, /* reg. 0x0f */
+ 0x00, /* reg. 0x10 */ /* RTL */
+ 0x00, /* reg. 0x11 */
+ 0x1f, /* reg. 0x12: Set to maximum gain */
+ 0x08, /* reg. 0x13: Enable IX2, Set to Middle Gain: 0x08,
+ Low Gain: 0x00, High Gain: 0x10 */
+ 0x00, /* reg. 0x14 */
+ 0x04, /* reg. 0x15: Enable LNA COMPS */
+ };
+
+ info("%s", __func__);
+
+ switch (priv->xtal_freq) {
+ case FC_XTAL_27_MHZ:
+ case FC_XTAL_28_8_MHZ:
+ reg[0x07] |= 0x20;
+ break;
+ case FC_XTAL_36_MHZ:
+ default:
+ break;
+ }
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
+
+ for (i = 1; i < sizeof(reg); i++) {
+ ret = fc0012_writereg(priv, i, reg[i]);
+ if (ret)
+ break;
+ }
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
+
+ if (ret)
+ warn("%s: failed: %d", __func__, ret);
+ return ret;
+}
+
+static int fc0012_sleep(struct dvb_frontend *fe)
+{
+ /* nothing to do here */
+ return 0;
+}
+
+static int fc0012_set_params(struct dvb_frontend *fe)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int i, ret = 0;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ u32 freq = p->frequency / 1000;
+ u32 delsys = p->delivery_system;
+ unsigned char reg[0x16], am, pm, multi;
+ unsigned long fVCO;
+ unsigned short xtal_freq_khz_2, xin, xdiv;
+ int vco_select = false;
+
+ info("%s", __func__);
+
+ if(fe->callback){
+ ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
FC0012_FE_CALLBACK_UHF_ENABLE, (freq > 300000 ? 0 : 1));
+ if (ret)
+ goto exit;
+ }
+
+ switch (priv->xtal_freq) {
+ case FC_XTAL_27_MHZ:
+ xtal_freq_khz_2 = 27000 / 2;
+ break;
+ case FC_XTAL_36_MHZ:
+ xtal_freq_khz_2 = 36000 / 2;
+ break;
+ case FC_XTAL_28_8_MHZ:
+ default:
+ xtal_freq_khz_2 = 28800 / 2;
+ break;
+ }
+
+ /* select frequency divider and the frequency of VCO */
+ if (freq * 96 < 3560000) {
+ multi = 96;
+ reg[5] = 0x82;
+ reg[6] = 0x00;
+ } else if (freq * 64 < 3560000) {
+ multi = 64;
+ reg[5] = 0x82;
+ reg[6] = 0x02;
+ } else if (freq * 48 < 3560000) {
+ multi = 48;
+ reg[5] = 0x42;
+ reg[6] = 0x00;
+ } else if (freq * 32 < 3560000) {
+ multi = 32;
+ reg[5] = 0x42;
+ reg[6] = 0x02;
+ } else if (freq * 24 < 3560000) {
+ multi = 24;
+ reg[5] = 0x22;
+ reg[6] = 0x00;
+ } else if (freq * 16 < 3560000) {
+ multi = 16;
+ reg[5] = 0x22;
+ reg[6] = 0x02;
+ } else if (freq * 12 < 3560000) {
+ multi = 12;
+ reg[5] = 0x12;
+ reg[6] = 0x00;
+ } else if (freq * 8 < 3560000) {
+ multi = 8;
+ reg[5] = 0x12;
+ reg[6] = 0x02;
+ } else if (freq * 6 < 3560000) {
+ multi = 6;
+ reg[5] = 0x0a;
+ reg[6] = 0x00;
+ } else {
+ multi = 4;
+ reg[5] = 0x0a;
+ reg[6] = 0x02;
+ }
+
+ fVCO = freq * multi;
+
+ reg[6] |= 0x08;
+ vco_select = true;
+
+ /* From divided value (XDIV) determined the FA and FP value */
+ xdiv = (unsigned short)(fVCO / xtal_freq_khz_2);
+ if ((fVCO - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
+ xdiv++;
+
+ pm = (unsigned char)(xdiv / 8);
+ am = (unsigned char)(xdiv - (8 * pm));
+
+ if (am < 2) {
+ reg[1] = am + 8;
+ reg[2] = pm - 1;
+ } else {
+ reg[1] = am;
+ reg[2] = pm;
+ }
+
+
+ /* From VCO frequency determines the XIN ( fractional part of Delta
+ Sigma PLL) and divided value (XDIV) */
+ xin = (unsigned short)(fVCO - (fVCO / xtal_freq_khz_2) * xtal_freq_khz_2);
+ xin = (xin << 15) / xtal_freq_khz_2;
+ if (xin >= 16384)
+ xin += 32768;
+
+ reg[3] = xin >> 8; /* xin with 9 bit resolution */
+ reg[4] = xin & 0xff;
+
+ if (delsys == SYS_DVBT) {
+ reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
+ switch (p->bandwidth_hz) {
+ case 6000000:
+ reg[6] |= 0x80;
+ break;
+ case 7000000:
+ reg[6] &= ~0x80;
+ reg[6] |= 0x40;
+ break;
+ case 8000000:
+ default:
+ reg[6] &= ~0xc0;
+ break;
+ }
+ } else {
+ err("%s: modulation type not supported!", __func__);
+ return -EINVAL;
+ }
+
+ /* modified for Realtek demod */
+ reg[5] |= 0x07;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
+
+ for (i = 1; i <= 6; i++) {
+ ret = fc0012_writereg(priv, i, reg[i]);
+ if (ret)
+ goto exit;
+ }
+
+ /* VCO Calibration */
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+
+ /* VCO Re-Calibration if needed */
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+
+ if (!ret) {
+ msleep(10);
+ ret = fc0012_readreg(priv, 0x0e, ®[0x0e]);
+ }
+ if (ret)
+ goto exit;
+
+ /* vco selection */
+ reg[0x0e] &= 0x3f;
+
+ if (vco_select) {
+ if (reg[0x0e] > 0x3c) {
+ reg[6] &= ~0x08;
+ ret = fc0012_writereg(priv, 0x06, reg[6]);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ }
+ } else {
+ if (reg[0x0e] < 0x02) {
+ reg[6] |= 0x08;
+ ret = fc0012_writereg(priv, 0x06, reg[6]);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ }
+ }
+
+ priv->frequency = p->frequency;
+ priv->bandwidth = p->bandwidth_hz;
+
+exit:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
+ if (ret)
+ pr_debug("%s: failed: %d", __func__, ret);
+ return ret;
+}
+
+static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ /* CHECK: always ? */
+ *frequency = 0;
+ return 0;
+}
+
+static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+
+static const struct dvb_tuner_ops fc0012_tuner_ops = {
+ .info = {
+ .name = "Fitipower FC0012",
+
+ .frequency_min = 170000000,
+ .frequency_max = 860000000,
+ .frequency_step = 0,
+ },
+
+ .release = fc0012_release,
+
+ .init = fc0012_init,
+ .sleep = fc0012_sleep,
+
+ .set_params = fc0012_set_params,
+
+ .get_frequency = fc0012_get_frequency,
+ .get_if_frequency = fc0012_get_if_frequency,
+ .get_bandwidth = fc0012_get_bandwidth,
+};
+
+struct dvb_frontend * fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, u8 i2c_address,
+ enum fc0012_xtal_freq xtal_freq)
+{
+ struct fc0012_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->i2c = i2c;
+ priv->addr = i2c_address;
+ priv->xtal_freq = xtal_freq;
+
+ info("Fitipower FC0012 successfully attached.");
+
+ fe->tuner_priv = priv;
+
+ memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ return fe;
+}
+EXPORT_SYMBOL(fc0012_attach);
+
+MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
+MODULE_AUTHOR("Hans-Frieder Vogt <hfv...@xxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.4");
diff --git a/drivers/media/common/tuners/fc0012.h
b/drivers/media/common/tuners/fc0012.h
new file mode 100644
index 0000000..1406e58
--- /dev/null
+++ b/drivers/media/common/tuners/fc0012.h
@@ -0,0 +1,60 @@
+/*
+ * Fitipower FC0012 tuner driver - include
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _FC0012_H_
+#define _FC0012_H_
+
+#include "dvb_frontend.h"
+
+enum fc0012_xtal_freq {
+ FC_XTAL_27_MHZ, /* 27000000 */
+ FC_XTAL_28_8_MHZ, /* 28800000 */
+ FC_XTAL_36_MHZ, /* 36000000 */
+};
+
+
+/** enum fc0011_fe_callback_commands - Frontend callbacks
+ *
+ * @FC0012_FE_CALLBACK_VHF_ENABLE: enable VHF or UHF
+ */
+enum fc0012_fe_callback_commands {
+ FC0012_FE_CALLBACK_UHF_ENABLE,
+};
+
+#define CONFIG_MEDIA_TUNER_FC0012
+
+#if defined(CONFIG_MEDIA_TUNER_FC0012) || \
+ (defined(CONFIG_MEDIA_TUNER_FC0012_MODULE) && defined(MODULE))
+extern struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ u8 i2c_address,
+ enum fc0012_xtal_freq xtal_freq);
+#else
+static inline struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ u8 i2c_address,
+ enum fc0012_xtal_freq xtal_freq)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/dvb-usb/Kconfig
b/drivers/media/dvb/dvb-usb/Kconfig
index be1db75..a24bbc1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -417,9 +417,11 @@ config DVB_USB_RTL28XXU
tristate "Realtek RTL28xxU DVB USB support"
depends on DVB_USB && EXPERIMENTAL
select DVB_RTL2830
+ select DVB_RTL2832
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+ select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 2418e41..19e942e 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -238,6 +238,7 @@
#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062
#define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078
#define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab
+#define USB_PID_TERRATEC_CINERGY_T_STICK_BLACK 0x00a9
#define USB_PID_TERRATEC_H7 0x10b4
#define USB_PID_TERRATEC_H7_2 0x10a3
#define USB_PID_TERRATEC_T3 0x10a0
diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c
b/drivers/media/dvb/dvb-usb/rtl28xxu.c
index 8f4736a..bc9f966 100644
--- a/drivers/media/dvb/dvb-usb/rtl28xxu.c
+++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2009 Antti Palosaari <crope@xxxxxx>
* Copyright (C) 2011 Antti Palosaari <crope@xxxxxx>
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@xxxxxxxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,10 +23,12 @@
#include "rtl28xxu.h"
#include "rtl2830.h"
+#include "rtl2832.h"
#include "qt1010.h"
#include "mt2060.h"
#include "mxl5005s.h"
+#include "fc0012.h"
/* debug */
static int dvb_usb_rtl28xxu_debug;
@@ -76,7 +79,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device
*d, struct rtl28xxu_req *req)
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
@@ -297,7 +300,7 @@ static int rtl2831u_frontend_attach(struct
dvb_usb_adapter *adap)
/* for QT1010 tuner probe */
struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf };
- deb_info("%s:\n", __func__);
+ deb_info("%s:", __func__);
/*
* RTL2831U GPIOs
@@ -312,6 +315,7 @@ static int rtl2831u_frontend_attach(struct
dvb_usb_adapter *adap)
if (ret)
goto err;
+
/* enable as output GPIO0, GPIO2, GPIO4 */
ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
if (ret)
@@ -332,10 +336,10 @@ static int rtl2831u_frontend_attach(struct
dvb_usb_adapter *adap)
if (ret == 0 && buf[0] == 0x2c) {
priv->tuner = TUNER_RTL2830_QT1010;
rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
- deb_info("%s: QT1010\n", __func__);
+ deb_info("%s: QT1010", __func__);
goto found;
} else {
- deb_info("%s: QT1010 probe failed=%d - %02x\n",
+ deb_info("%s: QT1010 probe failed=%d - %02x",
__func__, ret, buf[0]);
}
@@ -349,10 +353,10 @@ static int rtl2831u_frontend_attach(struct
dvb_usb_adapter *adap)
if (ret == 0 && buf[0] == 0x63) {
priv->tuner = TUNER_RTL2830_MT2060;
rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
- deb_info("%s: MT2060\n", __func__);
+ deb_info("%s: MT2060", __func__);
goto found;
} else {
- deb_info("%s: MT2060 probe failed=%d - %02x\n",
+ deb_info("%s: MT2060 probe failed=%d - %02x",
__func__, ret, buf[0]);
}
@@ -360,7 +364,7 @@ static int rtl2831u_frontend_attach(struct
dvb_usb_adapter *adap)
ret = 0;
priv->tuner = TUNER_RTL2830_MXL5005S;
rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
- deb_info("%s: MXL5005S\n", __func__);
+ deb_info("%s: MXL5005S", __func__);
goto found;
found:
@@ -374,37 +378,130 @@ found:
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
+ .i2c_addr = 0x10, /* 0x20 */
+ .xtal = 28800000,
+ .ts_mode = 0,
+ .spec_inv = 1,
+ .if_dvbt = 0,
+ .vtop = 0x20,
+ .krf = 0x04,
+ .agc_targ_val = 0x2d,
+ .tuner = TUNER_RTL2832_FC0012
+};
+
+
+static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
+ int cmd, int arg)
+{
+ int ret;
+ u8 val;
+
+ info("%s cmd=%d arg=%d", __func__, cmd, arg);
+ switch (cmd) {
+ case FC0012_FE_CALLBACK_UHF_ENABLE:
+ /* set output values */
+
+ ret = rtl2831_rd_reg(d, SYS_GPIO_DIR, &val);
+ if (ret)
+ goto err;
+
+ val &= 0xbf;
+
+ ret = rtl2831_wr_reg(d, SYS_GPIO_DIR, val);
+ if (ret)
+ goto err;
+
+
+ ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_EN, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x40;
+
+ ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_EN, val);
+ if (ret)
+ goto err;
+
+
+ ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+ if (ret)
+ goto err;
+
+ if (arg)
+ val &= 0xbf; /* set GPIO6 low */
+ else
+ val |= 0x40; /* set GPIO6 high */
+
+
+ ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+ if (ret)
+ goto err;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+ return 0;
+
+err:
+ err("%s: failed=%d", __func__, ret);
+
return ret;
}
+static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg)
+{
+ struct rtl28xxu_priv *priv = d->priv;
+
+ switch (priv->tuner) {
+ case TUNER_RTL2832_FC0012:
+ return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
+ default:
+ break;
+ }
+
+ return -ENODEV;
+}
+
+static int rtl2832u_frontend_callback(void *adapter_priv, int component,
+ int cmd, int arg)
+{
+ struct i2c_adapter *adap = adapter_priv;
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+
+ switch (component) {
+ case DVB_FRONTEND_COMPONENT_TUNER:
+ return rtl2832u_tuner_callback(d, cmd, arg);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+
+
+
static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
+ struct rtl2832_config *rtl2832_config;
+
u8 buf[1];
/* open RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
/* close RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
- /* for FC2580 tuner probe */
- struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
+ /* for FC0012 tuner probe */
+ struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
- deb_info("%s:\n", __func__);
-
- /* GPIO direction */
- ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
- if (ret)
- goto err;
-
- /* enable as output GPIO0, GPIO2, GPIO4 */
- ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
- if (ret)
- goto err;
-
- ret = rtl2831_wr_reg(adap->dev, SYS_DEMOD_CTL, 0xe8);
- if (ret)
- goto err;
+ deb_info("%s:", __func__);
/*
* Probe used tuner. We need to know used tuner before demod attach
@@ -416,17 +513,20 @@ static int rtl2832u_frontend_attach(struct
dvb_usb_adapter *adap)
if (ret)
goto err;
- /* check FC2580 ID register; reg=01 val=56 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580);
- if (ret == 0 && buf[0] == 0x56) {
- priv->tuner = TUNER_RTL2832_FC2580;
- deb_info("%s: FC2580\n", __func__);
+
+ /* check FC0012 ID register; reg=00 val=a1 */
+ ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012);
+ if (ret == 0 && buf[0] == 0xa1) {
+ priv->tuner = TUNER_RTL2832_FC0012;
+ rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
+ deb_info("%s: FC0012", __func__);
goto found;
} else {
- deb_info("%s: FC2580 probe failed=%d - %02x\n",
+ deb_info("%s: FC0012 probe failed=%d - %02x",
__func__, ret, buf[0]);
}
+
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
if (ret)
@@ -443,11 +543,19 @@ found:
goto err;
/* attach demodulator */
- /* TODO: */
+ adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config,
+ &adap->dev->i2c_adap, priv->tuner);
+ if (adap->fe_adap[0].fe == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* set fe callbacks */
+ adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback;
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
@@ -484,7 +592,7 @@ static int rtl2831u_tuner_attach(struct
dvb_usb_adapter *adap)
struct i2c_adapter *rtl2830_tuner_i2c;
struct dvb_frontend *fe;
- deb_info("%s:\n", __func__);
+ deb_info("%s:", __func__);
/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe);
@@ -515,7 +623,7 @@ static int rtl2831u_tuner_attach(struct
dvb_usb_adapter *adap)
return 0;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
@@ -525,12 +633,13 @@ static int rtl2832u_tuner_attach(struct
dvb_usb_adapter *adap)
struct rtl28xxu_priv *priv = adap->dev->priv;
struct dvb_frontend *fe;
- deb_info("%s:\n", __func__);
+ deb_info("%s:", __func__);
switch (priv->tuner) {
- case TUNER_RTL2832_FC2580:
- /* TODO: */
- fe = NULL;
+ case TUNER_RTL2832_FC0012:
+ fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe,
+ &adap->dev->i2c_adap, 0xc6>>1, FC_XTAL_28_8_MHZ);
+ return 0;
break;
default:
fe = NULL;
@@ -544,16 +653,16 @@ static int rtl2832u_tuner_attach(struct
dvb_usb_adapter *adap)
return 0;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
-static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
+static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
{
int ret;
u8 buf[2], gpio;
- deb_info("%s: onoff=%d\n", __func__, onoff);
+ deb_info("%s: onoff=%d", __func__, onoff);
ret = rtl2831_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio);
if (ret)
@@ -579,16 +688,186 @@ static int rtl28xxu_streaming_ctrl(struct
dvb_usb_adapter *adap , int onoff)
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
+{
+ int ret;
+ u8 buf[2];
+
+ deb_info("%s: onoff=%d", __func__, onoff);
+
+
+ if (onoff) {
+ buf[0] = 0x00;
+ buf[1] = 0x00;
+ } else {
+ buf[0] = 0x10; /* stall EPA */
+ buf[1] = 0x02; /* reset EPA */
+ }
+
+ ret = rtl2831_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
+ if (ret)
+ goto err;
+
+ return ret;
+err:
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
-static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff)
+
+static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) {
+
+ int ret;
+ struct rtl28xxu_req req;
+ u8 val;
+
+ deb_info("%s: onoff=%d", __func__, onoff);
+
+ if(onoff){
+ /* set output values */
+ ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x08;
+ val &= 0xef;
+
+ ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+ if (ret)
+ goto err;
+
+ /* enable as output GPIO3 */
+ ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_EN, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x08;
+
+ ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_EN, val);
+ if (ret)
+ goto err;
+
+ /* demod_ctl_1 */
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL1, &val);
+ if (ret)
+ goto err;
+
+ val &= 0xef;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL1, val);
+ if (ret)
+ goto err;
+
+ /* demod control */
+ /* PLL enable */
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL, &val);
+ if (ret)
+ goto err;
+
+ /* bit 7 to 1 */
+ val |= 0x80;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL, val);
+ if (ret)
+ goto err;
+
+ /* demod HW reset */
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL, &val);
+ if (ret)
+ goto err;
+ /* bit 5 to 0 */
+ val &= 0xdf;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL, val);
+ if (ret)
+ goto err;
+
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x20;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL, val);
+ if (ret)
+ goto err;
+
+ /* set page cache to 0 */
+ req.index = 0x0;
+ req.value = 0x20 + (1<<8);
+ req.data = &val;
+ req.size = 1;
+ ret = rtl28xxu_ctrl_msg(d, &req);
+ if (ret)
+ goto err;
+
+
+ mdelay(5);
+
+ /*enable ADC_Q and ADC_I */
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x48;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL, val);
+ if (ret)
+ goto err;
+
+
+ } else {
+ /* demod_ctl_1 */
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL1, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x0c;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL1, val);
+ if (ret)
+ goto err;
+
+ /* set output values */
+ ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+ if (ret)
+ goto err;
+
+ val |= 0x10;
+
+ ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+ if (ret)
+ goto err;
+
+ /* demod control */
+ ret = rtl2831_rd_reg(d, SYS_DEMOD_CTL, &val);
+ if (ret)
+ goto err;
+
+ val &= 0x37;
+
+ ret = rtl2831_wr_reg(d, SYS_DEMOD_CTL, val);
+ if (ret)
+ goto err;
+
+ }
+
+ return ret;
+err:
+ deb_info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
{
int ret;
u8 gpio, sys0;
- deb_info("%s: onoff=%d\n", __func__, onoff);
+ deb_info("%s: onoff=%d", __func__, onoff);
/* demod adc */
ret = rtl2831_rd_reg(d, SYS_SYS0, &sys0);
@@ -600,12 +879,12 @@ static int rtl28xxu_power_ctrl(struct
dvb_usb_device *d, int onoff)
if (ret)
goto err;
- deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
+ deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x", __func__, sys0, gpio);
if (onoff) {
gpio |= 0x01; /* GPIO0 = 1 */
gpio &= (~0x10); /* GPIO4 = 0 */
- sys0 = sys0 & 0x0f;
+ sys0 = sys0 & 0x0f; /* enable demod adc */
sys0 |= 0xe0;
} else {
gpio &= (~0x01); /* GPIO0 = 0 */
@@ -613,7 +892,7 @@ static int rtl28xxu_power_ctrl(struct
dvb_usb_device *d, int onoff)
sys0 = sys0 & (~0xc0);
}
- deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
+ deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x", __func__, sys0, gpio);
/* demod adc */
ret = rtl2831_wr_reg(d, SYS_SYS0, sys0);
@@ -627,7 +906,7 @@ static int rtl28xxu_power_ctrl(struct
dvb_usb_device *d, int onoff)
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
@@ -699,10 +978,12 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
+/* unused for now */
+#if 0
static int rtl2832u_rc_query(struct dvb_usb_device *d)
{
int ret, i;
@@ -760,14 +1041,16 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
exit:
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
+#endif
enum rtl28xxu_usb_table_entry {
RTL2831U_0BDA_2831,
RTL2831U_14AA_0160,
RTL2831U_14AA_0161,
+ RTL2832U_0CCD_00A9,
};
static struct usb_device_id rtl28xxu_table[] = {
@@ -780,6 +1063,8 @@ static struct usb_device_id rtl28xxu_table[] = {
USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
/* RTL2832U */
+ [RTL2832U_0CCD_00A9] = {
+ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK)},
{} /* terminating entry */
};
@@ -802,7 +1087,7 @@ static struct dvb_usb_device_properties
rtl28xxu_properties[] = {
{
.frontend_attach = rtl2831u_frontend_attach,
.tuner_attach = rtl2831u_tuner_attach,
- .streaming_ctrl = rtl28xxu_streaming_ctrl,
+ .streaming_ctrl = rtl2831u_streaming_ctrl,
.stream = {
.type = USB_BULK,
.count = 6,
@@ -818,7 +1103,7 @@ static struct dvb_usb_device_properties
rtl28xxu_properties[] = {
}
},
- .power_ctrl = rtl28xxu_power_ctrl,
+ .power_ctrl = rtl2831u_power_ctrl,
.rc.core = {
.protocol = RC_TYPE_NEC,
@@ -864,11 +1149,11 @@ static struct dvb_usb_device_properties
rtl28xxu_properties[] = {
{
.frontend_attach = rtl2832u_frontend_attach,
.tuner_attach = rtl2832u_tuner_attach,
- .streaming_ctrl = rtl28xxu_streaming_ctrl,
+ .streaming_ctrl = rtl2832u_streaming_ctrl,
.stream = {
.type = USB_BULK,
- .count = 6,
- .endpoint = 0x81,
+ .count = 10,
+ .endpoint = 0x01,
.u = {
.bulk = {
.buffersize = 8*512,
@@ -880,23 +1165,26 @@ static struct dvb_usb_device_properties
rtl28xxu_properties[] = {
}
},
- .power_ctrl = rtl28xxu_power_ctrl,
+ .power_ctrl = rtl2832u_power_ctrl,
- .rc.core = {
+ /*.rc.core = {
.protocol = RC_TYPE_NEC,
.module_name = "rtl28xxu",
.rc_query = rtl2832u_rc_query,
.rc_interval = 400,
.allowed_protos = RC_TYPE_NEC,
.rc_codes = RC_MAP_EMPTY,
- },
+ },*/
.i2c_algo = &rtl28xxu_i2c_algo,
- .num_device_descs = 0, /* disabled as no support for RTL2832 */
+ .num_device_descs = 1,
.devices = {
{
- .name = "Realtek RTL2832U reference design",
+ .name = "Terratec Cinergy T Stick Black",
+ .warm_ids = {
+ &rtl28xxu_table[RTL2832U_0CCD_00A9],
+ },
},
}
},
@@ -907,10 +1195,11 @@ static int rtl28xxu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret, i;
+ u8 val;
int properties_count = ARRAY_SIZE(rtl28xxu_properties);
struct dvb_usb_device *d;
- deb_info("%s: interface=%d\n", __func__,
+ deb_info("%s: interface=%d", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
@@ -926,22 +1215,31 @@ static int rtl28xxu_probe(struct usb_interface *intf,
if (ret)
goto err;
+
/* init USB endpoints */
- ret = rtl2831_wr_reg(d, USB_SYSCTL_0, 0x09);
+ ret = rtl2831_rd_reg(d, USB_SYSCTL_0, &val);
+ if (ret)
+ goto err;
+
+ /* enable DMA and Full Packet Mode*/
+ val |= 0x09;
+ ret = rtl2831_wr_reg(d, USB_SYSCTL_0, val);
if (ret)
goto err;
+ /* set EPA maximum packet size to 0x0200 */
ret = rtl2831_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
if (ret)
goto err;
+ /* change EPA FIFO length */
ret = rtl2831_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
if (ret)
goto err;
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ deb_info("%s: failed=%d", __func__, ret);
return ret;
}
@@ -957,8 +1255,6 @@ static int __init rtl28xxu_module_init(void)
{
int ret;
- deb_info("%s:\n", __func__);
-
ret = usb_register(&rtl28xxu_driver);
if (ret)
err("usb_register failed=%d", ret);
@@ -968,7 +1264,6 @@ static int __init rtl28xxu_module_init(void)
static void __exit rtl28xxu_module_exit(void)
{
- deb_info("%s:\n", __func__);
/* deregister this driver from the USB subsystem */
usb_deregister(&rtl28xxu_driver);
@@ -979,4 +1274,5 @@ module_exit(rtl28xxu_module_exit);
MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
MODULE_AUTHOR("Antti Palosaari <crope@xxxxxx>");
+MODULE_AUTHOR("Thomas Mair <thomas.mair86@xxxxxxxxxxxxxx>");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/Kconfig
b/drivers/media/dvb/frontends/Kconfig
index f479834..f7d67d7 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -432,6 +432,13 @@ config DVB_RTL2830
help
Say Y when you want to support this frontend.
+config DVB_RTL2832
+ tristate "Realtek RTL2832 DVB-T"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ Say Y when you want to support this frontend.
+
comment "DVB-C (cable) frontends"
depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile
b/drivers/media/dvb/frontends/Makefile
index b0381dc..a109aae 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -100,4 +100,4 @@ obj-$(CONFIG_DVB_TDA10071) += tda10071.o
obj-$(CONFIG_DVB_RTL2830) += rtl2830.o
obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o
obj-$(CONFIG_DVB_AF9033) += af9033.o
-
+obj-$(CONFIG_DVB_RTL2832) += rtl2832.o
diff --git a/drivers/media/dvb/frontends/rtl2832.c
b/drivers/media/dvb/frontends/rtl2832.c
new file mode 100644
index 0000000..920b068
--- /dev/null
+++ b/drivers/media/dvb/frontends/rtl2832.c
@@ -0,0 +1,832 @@
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "rtl2832_priv.h"
+
+
+
+int rtl2832_debug = 1;
+module_param_named(debug, rtl2832_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+
+static int reg_mask[32] = {
+ 0x00000001,
+ 0x00000003,
+ 0x00000007,
+ 0x0000000f,
+ 0x0000001f,
+ 0x0000003f,
+ 0x0000007f,
+ 0x000000ff,
+ 0x000001ff,
+ 0x000003ff,
+ 0x000007ff,
+ 0x00000fff,
+ 0x00001fff,
+ 0x00003fff,
+ 0x00007fff,
+ 0x0000ffff,
+ 0x0001ffff,
+ 0x0003ffff,
+ 0x0007ffff,
+ 0x000fffff,
+ 0x001fffff,
+ 0x003fffff,
+ 0x007fffff,
+ 0x00ffffff,
+ 0x01ffffff,
+ 0x03ffffff,
+ 0x07ffffff,
+ 0x0fffffff,
+ 0x1fffffff,
+ 0x3fffffff,
+ 0x7fffffff,
+ 0xffffffff
+};
+
+static const rtl2832_reg_entry registers[] = {
+ [DVBT_SOFT_RST] = {0x1, 0x1, 2, 2},
+ [DVBT_IIC_REPEAT] = {0x1, 0x1, 3, 3},
+ [DVBT_TR_WAIT_MIN_8K] = {0x1, 0x88, 11, 2},
+ [DVBT_RSD_BER_FAIL_VAL] = {0x1, 0x8f, 15, 0},
+ [DVBT_EN_BK_TRK] = {0x1, 0xa6, 7, 7},
+ [DVBT_AD_EN_REG] = {0x0, 0x8, 7, 7},
+ [DVBT_AD_EN_REG1] = {0x0, 0x8, 6, 6},
+ [DVBT_EN_BBIN] = {0x1, 0xb1, 0, 0},
+ [DVBT_MGD_THD0] = {0x1, 0x95, 7, 0},
+ [DVBT_MGD_THD1] = {0x1, 0x96, 7, 0},
+ [DVBT_MGD_THD2] = {0x1, 0x97, 7, 0},
+ [DVBT_MGD_THD3] = {0x1, 0x98, 7, 0},
+ [DVBT_MGD_THD4] = {0x1, 0x99, 7, 0},
+ [DVBT_MGD_THD5] = {0x1, 0x9a, 7, 0},
+ [DVBT_MGD_THD6] = {0x1, 0x9b, 7, 0},
+ [DVBT_MGD_THD7] = {0x1, 0x9c, 7, 0},
+ [DVBT_EN_CACQ_NOTCH] = {0x1, 0x61, 4, 4},
+ [DVBT_AD_AV_REF] = {0x0, 0x9, 6, 0},
+ [DVBT_REG_PI] = {0x0, 0xa, 2, 0},
+ [DVBT_PIP_ON] = {0x0, 0x21, 3, 3},
+ [DVBT_SCALE1_B92] = {0x2, 0x92, 7, 0},
+ [DVBT_SCALE1_B93] = {0x2, 0x93, 7, 0},
+ [DVBT_SCALE1_BA7] = {0x2, 0xa7, 7, 0},
+ [DVBT_SCALE1_BA9] = {0x2, 0xa9, 7, 0},
+ [DVBT_SCALE1_BAA] = {0x2, 0xaa, 7, 0},
+ [DVBT_SCALE1_BAB] = {0x2, 0xab, 7, 0},
+ [DVBT_SCALE1_BAC] = {0x2, 0xac, 7, 0},
+ [DVBT_SCALE1_BB0] = {0x2, 0xb0, 7, 0},
+ [DVBT_SCALE1_BB1] = {0x2, 0xb1, 7, 0},
+ [DVBT_KB_P1] = {0x1, 0x64, 3, 1},
+ [DVBT_KB_P2] = {0x1, 0x64, 6, 4},
+ [DVBT_KB_P3] = {0x1, 0x65, 2, 0},
+ [DVBT_OPT_ADC_IQ] = {0x0, 0x6, 5, 4},
+ [DVBT_AD_AVI] = {0x0, 0x9, 1, 0},
+ [DVBT_AD_AVQ] = {0x0, 0x9, 3, 2},
+ [DVBT_K1_CR_STEP12] = {0x2, 0xad, 9, 4},
+ [DVBT_TRK_KS_P2] = {0x1, 0x6f, 2, 0},
+ [DVBT_TRK_KS_I2] = {0x1, 0x70, 5, 3},
+ [DVBT_TR_THD_SET2] = {0x1, 0x72, 3, 0},
+ [DVBT_TRK_KC_P2] = {0x1, 0x73, 5, 3},
+ [DVBT_TRK_KC_I2] = {0x1, 0x75, 2, 0},
+ [DVBT_CR_THD_SET2] = {0x1, 0x76, 7, 6},
+ [DVBT_PSET_IFFREQ] = {0x1, 0x19, 21, 0},
+ [DVBT_SPEC_INV] = {0x1, 0x15, 0, 0},
+ [DVBT_RSAMP_RATIO] = {0x1, 0x9f, 27, 2},
+ [DVBT_CFREQ_OFF_RATIO] = {0x1, 0x9d, 23, 4},
+ [DVBT_FSM_STAGE] = {0x3, 0x51, 6, 3},
+ [DVBT_RX_CONSTEL] = {0x3, 0x3c, 3, 2},
+ [DVBT_RX_HIER] = {0x3, 0x3c, 6, 4},
+ [DVBT_RX_C_RATE_LP] = {0x3, 0x3d, 2, 0},
+ [DVBT_RX_C_RATE_HP] = {0x3, 0x3d, 5, 3},
+ [DVBT_GI_IDX] = {0x3, 0x51, 1, 0},
+ [DVBT_FFT_MODE_IDX] = {0x3, 0x51, 2, 2},
+ [DVBT_RSD_BER_EST] = {0x3, 0x4e, 15, 0},
+ [DVBT_CE_EST_EVM] = {0x4, 0xc, 15, 0},
+ [DVBT_RF_AGC_VAL] = {0x3, 0x5b, 13, 0},
+ [DVBT_IF_AGC_VAL] = {0x3, 0x59, 13, 0},
+ [DVBT_DAGC_VAL] = {0x3, 0x5, 7, 0},
+ [DVBT_SFREQ_OFF] = {0x3, 0x18, 13, 0},
+ [DVBT_CFREQ_OFF] = {0x3, 0x5f, 17, 0},
+ [DVBT_POLAR_RF_AGC] = {0x0, 0xe, 1, 1},
+ [DVBT_POLAR_IF_AGC] = {0x0, 0xe, 0, 0},
+ [DVBT_AAGC_HOLD] = {0x1, 0x4, 5, 5},
+ [DVBT_EN_RF_AGC] = {0x1, 0x4, 6, 6},
+ [DVBT_EN_IF_AGC] = {0x1, 0x4, 7, 7},
+ [DVBT_IF_AGC_MIN] = {0x1, 0x8, 7, 0},
+ [DVBT_IF_AGC_MAX] = {0x1, 0x9, 7, 0},
+ [DVBT_RF_AGC_MIN] = {0x1, 0xa, 7, 0},
+ [DVBT_RF_AGC_MAX] = {0x1, 0xb, 7, 0},
+ [DVBT_IF_AGC_MAN] = {0x1, 0xc, 6, 6},
+ [DVBT_IF_AGC_MAN_VAL] = {0x1, 0xc, 13, 0},
+ [DVBT_RF_AGC_MAN] = {0x1, 0xe, 6, 6},
+ [DVBT_RF_AGC_MAN_VAL] = {0x1, 0xe, 13, 0},
+ [DVBT_DAGC_TRG_VAL] = {0x1, 0x12, 7, 0},
+ [DVBT_AGC_TARG_VAL_0] = {0x1, 0x2, 0, 0},
+ [DVBT_AGC_TARG_VAL_8_1] = {0x1, 0x3, 7, 0},
+ [DVBT_AAGC_LOOP_GAIN] = {0x1, 0xc7, 5, 1},
+ [DVBT_LOOP_GAIN2_3_0] = {0x1, 0x4, 4, 1},
+ [DVBT_LOOP_GAIN2_4] = {0x1, 0x5, 7, 7},
+ [DVBT_LOOP_GAIN3] = {0x1, 0xc8, 4, 0},
+ [DVBT_VTOP1] = {0x1, 0x6, 5, 0},
+ [DVBT_VTOP2] = {0x1, 0xc9, 5, 0},
+ [DVBT_VTOP3] = {0x1, 0xca, 5, 0},
+ [DVBT_KRF1] = {0x1, 0xcb, 7, 0},
+ [DVBT_KRF2] = {0x1, 0x7, 7, 0},
+ [DVBT_KRF3] = {0x1, 0xcd, 7, 0},
+ [DVBT_KRF4] = {0x1, 0xce, 7, 0},
+ [DVBT_EN_GI_PGA] = {0x1, 0xe5, 0, 0},
+ [DVBT_THD_LOCK_UP] = {0x1, 0xd9, 8, 0},
+ [DVBT_THD_LOCK_DW] = {0x1, 0xdb, 8, 0},
+ [DVBT_THD_UP1] = {0x1, 0xdd, 7, 0},
+ [DVBT_THD_DW1] = {0x1, 0xde, 7, 0},
+ [DVBT_INTER_CNT_LEN] = {0x1, 0xd8, 3, 0},
+ [DVBT_GI_PGA_STATE] = {0x1, 0xe6, 3, 3},
+ [DVBT_EN_AGC_PGA] = {0x1, 0xd7, 0, 0},
+ [DVBT_CKOUTPAR] = {0x1, 0x7b, 5, 5},
+ [DVBT_CKOUT_PWR] = {0x1, 0x7b, 6, 6},
+ [DVBT_SYNC_DUR] = {0x1, 0x7b, 7, 7},
+ [DVBT_ERR_DUR] = {0x1, 0x7c, 0, 0},
+ [DVBT_SYNC_LVL] = {0x1, 0x7c, 1, 1},
+ [DVBT_ERR_LVL] = {0x1, 0x7c, 2, 2},
+ [DVBT_VAL_LVL] = {0x1, 0x7c, 3, 3},
+ [DVBT_SERIAL] = {0x1, 0x7c, 4, 4},
+ [DVBT_SER_LSB] = {0x1, 0x7c, 5, 5},
+ [DVBT_CDIV_PH0] = {0x1, 0x7d, 3, 0},
+ [DVBT_CDIV_PH1] = {0x1, 0x7d, 7, 4},
+ [DVBT_MPEG_IO_OPT_2_2] = {0x0, 0x6, 7, 7},
+ [DVBT_MPEG_IO_OPT_1_0] = {0x0, 0x7, 7, 6},
+ [DVBT_CKOUTPAR_PIP] = {0x0, 0xb7, 4, 4},
+ [DVBT_CKOUT_PWR_PIP] = {0x0, 0xb7, 3, 3},
+ [DVBT_SYNC_LVL_PIP] = {0x0, 0xb7, 2, 2},
+ [DVBT_ERR_LVL_PIP] = {0x0, 0xb7, 1, 1},
+ [DVBT_VAL_LVL_PIP] = {0x0, 0xb7, 0, 0},
+ [DVBT_CKOUTPAR_PID] = {0x0, 0xb9, 4, 4},
+ [DVBT_CKOUT_PWR_PID] = {0x0, 0xb9, 3, 3},
+ [DVBT_SYNC_LVL_PID] = {0x0, 0xb9, 2, 2},
+ [DVBT_ERR_LVL_PID] = {0x0, 0xb9, 1, 1},
+ [DVBT_VAL_LVL_PID] = {0x0, 0xb9, 0, 0},
+ [DVBT_SM_PASS] = {0x1, 0x93, 11, 0},
+ [DVBT_AD7_SETTING] = {0x0, 0x11, 15, 0},
+ [DVBT_RSSI_R] = {0x3, 0x1, 6, 0},
+ [DVBT_ACI_DET_IND] = {0x3, 0x12, 0, 0},
+ [DVBT_REG_MON] = {0x0, 0xd, 1, 0},
+ [DVBT_REG_MONSEL] = {0x0, 0xd, 2, 2},
+ [DVBT_REG_GPE] = {0x0, 0xd, 7, 7},
+ [DVBT_REG_GPO] = {0x0, 0x10, 0, 0},
+ [DVBT_REG_4MSEL] = {0x0, 0x13, 0, 0},
+};
+
+
+
+/* write multiple hardware registers */
+static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
+{
+ int ret;
+ u8 buf[1+len];
+ struct i2c_msg msg[1] = {
+ {
+ .addr = priv->cfg.i2c_addr,
+ .flags = 0,
+ .len = 1+len,
+ .buf = buf,
+ }
+ };
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ ret = i2c_transfer(priv->i2c, msg, 1);
+ if (ret == 1) {
+ ret = 0;
+ } else {
+ warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
+ ret = -EREMOTEIO;
+ }
+ return ret;
+}
+
+/* read multiple hardware registers */
+static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
+{
+ int ret;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = priv->cfg.i2c_addr,
+ .flags = 0,
+ .len = 1,
+ .buf = ®,
+ }, {
+ .addr = priv->cfg.i2c_addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = val,
+ }
+ };
+
+ ret = i2c_transfer(priv->i2c, msg, 2);
+ if (ret == 2) {
+ ret = 0;
+ } else {
+ warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
+ ret = -EREMOTEIO;
+ }
+ return ret;
+}
+
+/* write multiple registers */
+static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8
page, u8 *val, int len)
+{
+ int ret;
+
+
+ /* switch bank if needed */
+ if (page != priv->page) {
+ ret = rtl2832_wr(priv, 0x00, &page, 1);
+ if (ret)
+ return ret;
+
+ priv->page = page;
+ }
+
+ return rtl2832_wr(priv, reg, val, len);
+}
+
+/* read multiple registers */
+static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8
page, u8 *val, int len)
+{
+ int ret;
+
+ /* switch bank if needed */
+ if (page != priv->page) {
+ ret = rtl2832_wr(priv, 0x00, &page, 1);
+ if (ret)
+ return ret;
+
+ priv->page = page;
+ }
+
+ return rtl2832_rd(priv, reg, val, len);
+}
+
+#if 0 /* currently not used */
+/* write single register */
+static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val)
+{
+ return rtl2832_wr_regs(priv, reg, page, &val, 1);
+}
+#endif
+
+/* read single register */
+static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val)
+{
+ return rtl2832_rd_regs(priv, reg, page, val, 1);
+}
+
+int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val){
+ int ret;
+
+ u8 reg_start_addr;
+ u8 msb, lsb;
+ u8 page;
+ u8 reading[4];
+ u32 reading_tmp;
+ int i;
+
+ u8 len;
+ u32 mask;
+
+ reg_start_addr = registers[reg].start_address;
+ msb = registers[reg].msb;
+ lsb = registers[reg].lsb;
+ page = registers[reg].page;
+
+ len = (msb >> 3) + 1;
+ mask = reg_mask[msb-lsb];
+
+
+ ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
+ if (ret)
+ goto err;
+
+ reading_tmp = 0;
+ for(i = 0; i < len; i++){
+ reading_tmp |= reading[i] << ((len-1-i)*8);
+ }
+
+ *val = (reading_tmp >> lsb) & mask;
+
+ return ret;
+
+err:
+ return ret;
+
+}
+
+int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
+{
+ int ret, i;
+ u8 len;
+ u8 reg_start_addr;
+ u8 msb, lsb;
+ u8 page;
+ u32 mask;
+
+
+ u8 reading[4];
+ u8 writing[4];
+ u32 reading_tmp;
+ u32 writing_tmp;
+
+
+ reg_start_addr = registers[reg].start_address;
+ msb = registers[reg].msb;
+ lsb = registers[reg].lsb;
+ page = registers[reg].page;
+
+ len = (msb >> 3) + 1;
+ mask = reg_mask[msb-lsb];
+
+
+ ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
+ if (ret)
+ goto err;
+
+ reading_tmp = 0;
+ for (i = 0; i < len; i++) {
+ reading_tmp |= reading[i] << ((len-1-i)*8);
+ }
+
+ writing_tmp = reading_tmp & ~(mask << lsb);
+ writing_tmp |= ((val & mask) << lsb);
+
+
+ for (i = 0; i < len; i++) {
+ writing[i] = (writing_tmp >> ((len-1-i)*8)) & 0xff;
+ }
+
+ ret = rtl2832_wr_regs(priv, reg_start_addr, page, &writing[0], len);
+ if(ret)
+ goto err;
+
+ return ret;
+
+err:
+ return ret;
+
+}
+
+
+static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ int ret;
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+
+ dbg("%s: enable=%d", __func__, enable);
+
+ /* gate already open or close */
+ if (priv->i2c_gate_state == enable)
+ return 0;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable?0x1:0x0));
+
+ if (ret)
+ goto err;
+
+ priv->i2c_gate_state = enable;
+
+ return ret;
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+
+
+static int rtl2832_init(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+ int i, ret;
+
+ u8 en_bbin;
+ u64 pset_iffreq;
+
+ /* initialization values for the demodulator registers */
+ static rtl2832_reg_value rtl2832_initial_regs_1[] = {
+ {DVBT_AD_EN_REG, 0x1 },
+ {DVBT_AD_EN_REG1, 0x1 },
+ {DVBT_RSD_BER_FAIL_VAL, 0x2800 },
+ {DVBT_MGD_THD0, 0x10 },
+ {DVBT_MGD_THD1, 0x20 },
+ {DVBT_MGD_THD2, 0x20 },
+ {DVBT_MGD_THD3, 0x40 },
+ {DVBT_MGD_THD4, 0x22 },
+ {DVBT_MGD_THD5, 0x32 },
+ {DVBT_MGD_THD6, 0x37 },
+ {DVBT_MGD_THD7, 0x39 },
+ {DVBT_EN_BK_TRK, 0x0 },
+ {DVBT_EN_CACQ_NOTCH, 0x0 },
+ {DVBT_AD_AV_REF, 0x2a },
+ {DVBT_REG_PI, 0x6 },
+ {DVBT_PIP_ON, 0x0 },
+ {DVBT_CDIV_PH0, 0x8 },
+ {DVBT_CDIV_PH1, 0x8 },
+ {DVBT_SCALE1_B92, 0x4 },
+ {DVBT_SCALE1_B93, 0xb0 },
+ {DVBT_SCALE1_BA7, 0x78 },
+ {DVBT_SCALE1_BA9, 0x28 },
+ {DVBT_SCALE1_BAA, 0x59 },
+ {DVBT_SCALE1_BAB, 0x83 },
+ {DVBT_SCALE1_BAC, 0xd4 },
+ {DVBT_SCALE1_BB0, 0x65 },
+ {DVBT_SCALE1_BB1, 0x43 },
+ {DVBT_KB_P1, 0x1 },
+ {DVBT_KB_P2, 0x4 },
+ {DVBT_KB_P3, 0x7 },
+ {DVBT_K1_CR_STEP12, 0xa },
+ {DVBT_REG_GPE, 0x1 },
+ {DVBT_SERIAL, 0x0},
+ {DVBT_CDIV_PH0, 0x9},
+ {DVBT_CDIV_PH1, 0x9},
+ {DVBT_MPEG_IO_OPT_2_2, 0x0},
+ {DVBT_MPEG_IO_OPT_1_0, 0x0},
+ {DVBT_TRK_KS_P2, 0x4},
+ {DVBT_TRK_KS_I2, 0x7},
+ {DVBT_TR_THD_SET2, 0x6},
+ {DVBT_TRK_KC_I2, 0x5},
+ {DVBT_CR_THD_SET2, 0x1},
+
+
+ };
+
+ static rtl2832_reg_value rtl2832_initial_regs_2[] = {
+ {DVBT_SPEC_INV, 0x0},
+ {DVBT_DAGC_TRG_VAL, 0x5a },
+ {DVBT_AGC_TARG_VAL_0, 0x0 },
+ {DVBT_AGC_TARG_VAL_8_1, 0x5a },
+ {DVBT_AAGC_LOOP_GAIN, 0x16 },
+ {DVBT_LOOP_GAIN2_3_0, 0x6 },
+ {DVBT_LOOP_GAIN2_4, 0x1 },
+ {DVBT_LOOP_GAIN3, 0x16 },
+ {DVBT_VTOP1, 0x35 },
+ {DVBT_VTOP2, 0x21 },
+ {DVBT_VTOP3, 0x21 },
+ {DVBT_KRF1, 0x0 },
+ {DVBT_KRF2, 0x40 },
+ {DVBT_KRF3, 0x10 },
+ {DVBT_KRF4, 0x10 },
+ {DVBT_IF_AGC_MIN, 0x80 },
+ {DVBT_IF_AGC_MAX, 0x7f },
+ {DVBT_RF_AGC_MIN, 0x80 },
+ {DVBT_RF_AGC_MAX, 0x7f },
+ {DVBT_POLAR_RF_AGC, 0x0 },
+ {DVBT_POLAR_IF_AGC, 0x0 },
+ {DVBT_AD7_SETTING, 0xe9bf },
+ {DVBT_EN_GI_PGA, 0x0 },
+ {DVBT_THD_LOCK_UP, 0x0 },
+ {DVBT_THD_LOCK_DW, 0x0 },
+ {DVBT_THD_UP1, 0x11 },
+ {DVBT_THD_DW1, 0xef },
+ {DVBT_INTER_CNT_LEN, 0xc },
+ {DVBT_GI_PGA_STATE, 0x0 },
+ {DVBT_EN_AGC_PGA, 0x1 },
+ {DVBT_IF_AGC_MAN, 0x0 },
+ };
+
+
+ info("%s", __func__);
+
+ en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0);
+
+ /* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22) /
CrystalFreqHz) */
+ pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
+ pset_iffreq *= 0x400000;
+ pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
+ pset_iffreq = pset_iffreq & 0x3fffff;
+
+
+
+ for (i = 0; i < 42; i++) {
+ ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs_1[i].reg,
rtl2832_initial_regs_1[i].value);
+ if (ret)
+ goto err;
+ }
+
+ /* if frequency settings */
+ ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
+ if (ret)
+ goto err;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
+ if(ret)
+ goto err;
+
+ for (i = 0; i < 31; i++) {
+ ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs_2[i].reg,
rtl2832_initial_regs_2[i].value);
+ if (ret)
+ goto err;
+ }
+
+ priv->sleeping = false;
+
+ return ret;
+
+err:
+ return ret;
+}
+
+static int rtl2832_sleep(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+
+ info("%s", __func__);
+ priv->sleeping = true;
+ return 0;
+}
+
+int rtl2832_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *s)
+{
+ info("%s", __func__);
+ s->min_delay_ms = 1000;
+ s->step_size = fe->ops.info.frequency_stepsize * 2;
+ s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
+ return 0;
+}
+
+static int rtl2832_set_frontend(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int ret, i, j;
+ u64 bw_mode, num, num2;
+ u32 resamp_ratio, cfreq_off_ratio;
+
+
+ static u8 bw_params[3][32] = {
+ /* 6 MHz bandwidth */
+ {
+ 0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
+ 0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
+ 0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
+ 0x19, 0xe0,
+ },
+
+ /* 7 MHz bandwidth */
+ {
+ 0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
+ 0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
+ 0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
+ 0x19, 0x10,
+ },
+
+ /* 8 MHz bandwidth */
+ {
+ 0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
+ 0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
+ 0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
+ 0x19, 0xe0,
+ },
+ };
+
+
+ info("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__,
+ c->frequency, c->bandwidth_hz, c->inversion);
+
+
+ /* program tuner */
+ if (fe->ops.tuner_ops.set_params)
+ fe->ops.tuner_ops.set_params(fe);
+
+
+ switch (c->bandwidth_hz) {
+ case 6000000:
+ i = 0;
+ bw_mode = 48000000;
+ break;
+ case 7000000:
+ i = 1;
+ bw_mode = 56000000;
+ break;
+ case 8000000:
+ i = 2;
+ bw_mode = 64000000;
+ break;
+ default:
+ dbg("invalid bandwidth");
+ return -EINVAL;
+ }
+
+ for (j = 0; j < 32; j++){
+ ret = rtl2832_wr_regs(priv, 0x1c+j, 1, &bw_params[i][j], 1);
+ if (ret)
+ goto err;
+ }
+
+ /* calculate and set resample ratio */
+ /* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22) /
ConstWithBandwidthMode) */
+ num = priv->cfg.xtal * 7;
+ num *= 0x400000;
+ num = div_u64(num, bw_mode);
+ resamp_ratio = num & 0x3ffffff;
+ ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio);
+ if (ret)
+ goto err;
+
+ /* calculate and set cfreq off ratio */
+ /* CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20) /
(CrystalFreqHz * 7)) */
+ num = bw_mode << 20;
+ num2 = priv->cfg.xtal * 7;
+ num = div_u64(num, num2);
+ num = -num;
+ cfreq_off_ratio = num & 0xfffff;
+ ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
+ if (ret)
+ goto err;
+
+
+ /* soft reset */
+ ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
+ if (ret)
+ goto err;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
+ if (ret)
+ goto err;
+
+ return ret;
+err:
+ info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+ int ret;
+ u32 tmp;
+ *status = 0;
+
+
+ info("%s", __func__);
+ if (priv->sleeping)
+ return 0;
+
+ ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE, &tmp);
+ if (ret)
+ goto err;
+
+ if (tmp == 11) {
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ }
+ /* TODO find out if this is also true */
+ /*else if (tmp == 10) {
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI;
+ }*/
+
+ return ret;
+err:
+ info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ info("%s", __func__);
+ *snr = 0;
+ return 0;
+}
+
+static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ info("%s", __func__);
+ *ber = 0;
+ return 0;
+}
+
+static int rtl2832_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ info("%s", __func__);
+ *ucblocks = 0;
+ return 0;
+}
+
+static int rtl2832_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ info("%s", __func__);
+ *strength = 0;
+ return 0;
+}
+
+static struct dvb_frontend_ops rtl2832_ops;
+
+static void rtl2832_release(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+
+ info("%s", __func__);
+ kfree(priv);
+}
+
+struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg,
+ struct i2c_adapter *i2c, u8 tuner)
+{
+ struct rtl2832_priv *priv = NULL;
+ int ret = 0;
+ u8 tmp;
+
+ info("%s", __func__);
+
+ /* allocate memory for the internal state */
+ priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL);
+ if (priv == NULL)
+ goto err;
+
+ /* setup the priv */
+ priv->i2c = i2c;
+ priv->tuner = tuner;
+ memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config));
+
+ /* check if the demod is there */
+ ret = rtl2832_rd_reg(priv, 0x00, 0x0, &tmp);
+ if (ret)
+ goto err;
+
+ /* create dvb_frontend */
+ memcpy(&priv->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
+ priv->fe.demodulator_priv = priv;
+
+ /* TODO implement sleep mode depending on RC */
+ priv->sleeping = true;
+
+ return &priv->fe;
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ kfree(priv);
+ return NULL;
+}
+EXPORT_SYMBOL(rtl2832_attach);
+
+static struct dvb_frontend_ops rtl2832_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "Realtek RTL2832 (DVB-T)",
+ .type = FE_OFDM,
+ .frequency_min = 50000000,
+ .frequency_max = 862000000,
+ .frequency_stepsize = 166667,
+ .caps = FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO |
+ FE_CAN_RECOVER |
+ FE_CAN_MUTE_TS
+ },
+
+ .release = rtl2832_release,
+
+ .init = rtl2832_init,
+ .sleep = rtl2832_sleep,
+
+ .get_tune_settings = rtl2832_get_tune_settings,
+
+ .set_frontend = rtl2832_set_frontend,
+
+ .read_status = rtl2832_read_status,
+ .read_snr = rtl2832_read_snr,
+ .read_ber = rtl2832_read_ber,
+ .read_ucblocks = rtl2832_read_ucblocks,
+ .read_signal_strength = rtl2832_read_signal_strength,
+ .i2c_gate_ctrl = rtl2832_i2c_gate_ctrl,
+};
+
+MODULE_AUTHOR("Thomas Mair <mair.thomas86@xxxxxxxxx>");
+MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
diff --git a/drivers/media/dvb/frontends/rtl2832.h
b/drivers/media/dvb/frontends/rtl2832.h
new file mode 100644
index 0000000..b16631a
--- /dev/null
+++ b/drivers/media/dvb/frontends/rtl2832.h
@@ -0,0 +1,300 @@
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef RTL2832_H
+#define RTL2832_H
+
+#include <linux/dvb/frontend.h>
+
+struct rtl2832_config {
+ /*
+ * Demodulator I2C address.
+ */
+ u8 i2c_addr;
+
+ /*
+ * Xtal frequency.
+ * Hz
+ * 4000000, 16000000, 25000000, 28800000
+ */
+ u32 xtal;
+
+ /*
+ * IFs for all used modes.
+ * Hz
+ * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000
+ */
+ u32 if_dvbt;
+
+ /*
+ */
+ u8 tuner;
+};
+
+
+#if defined(CONFIG_DVB_RTL2832) || \
+ (defined(CONFIG_DVB_RTL2832_MODULE) && defined(MODULE))
+extern struct dvb_frontend *rtl2832_attach(
+ const struct rtl2832_config *cfg,
+ struct i2c_adapter *i2c,
+ u8 tuner
+);
+
+extern struct i2c_adapter *rtl2832_get_tuner_i2c_adapter(
+ struct dvb_frontend *fe
+);
+#else
+static inline struct dvb_frontend *rtl2832_attach(
+ const struct rtl2832_config *config,
+ struct i2c_adapter *i2c
+)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+static inline struct i2c_adapter *rtl2832_get_tuner_i2c_adapter(
+ struct dvb_frontend *fe
+)
+{
+ return NULL;
+}
+#endif
+
+
+/* Demod register bit names */
+enum DVBT_REG_BIT_NAME
+{
+ DVBT_SOFT_RST,
+ DVBT_IIC_REPEAT,
+ DVBT_TR_WAIT_MIN_8K,
+ DVBT_RSD_BER_FAIL_VAL,
+ DVBT_EN_BK_TRK,
+ DVBT_REG_PI,
+ DVBT_REG_PFREQ_1_0,
+ DVBT_PD_DA8,
+ DVBT_LOCK_TH,
+ DVBT_BER_PASS_SCAL,
+ DVBT_CE_FFSM_BYPASS,
+ DVBT_ALPHAIIR_N,
+ DVBT_ALPHAIIR_DIF,
+ DVBT_EN_TRK_SPAN,
+ DVBT_LOCK_TH_LEN,
+ DVBT_CCI_THRE,
+ DVBT_CCI_MON_SCAL,
+ DVBT_CCI_M0,
+ DVBT_CCI_M1,
+ DVBT_CCI_M2,
+ DVBT_CCI_M3,
+ DVBT_SPEC_INIT_0,
+ DVBT_SPEC_INIT_1,
+ DVBT_SPEC_INIT_2,
+ DVBT_AD_EN_REG,
+ DVBT_AD_EN_REG1,
+ DVBT_EN_BBIN,
+ DVBT_MGD_THD0,
+ DVBT_MGD_THD1,
+ DVBT_MGD_THD2,
+ DVBT_MGD_THD3,
+ DVBT_MGD_THD4,
+ DVBT_MGD_THD5,
+ DVBT_MGD_THD6,
+ DVBT_MGD_THD7,
+ DVBT_EN_CACQ_NOTCH,
+ DVBT_AD_AV_REF,
+ DVBT_PIP_ON,
+ DVBT_SCALE1_B92,
+ DVBT_SCALE1_B93,
+ DVBT_SCALE1_BA7,
+ DVBT_SCALE1_BA9,
+ DVBT_SCALE1_BAA,
+ DVBT_SCALE1_BAB,
+ DVBT_SCALE1_BAC,
+ DVBT_SCALE1_BB0,
+ DVBT_SCALE1_BB1,
+ DVBT_KB_P1,
+ DVBT_KB_P2,
+ DVBT_KB_P3,
+ DVBT_OPT_AD
+ DVBT_AD_AVI
+ DVBT_AD_AVQ
+ DVBT_K1_CR_STEP12,
+ DVBT_TRK_KS_P2,
+ DVBT_TRK_KS_I2,
+ DVBT_TR_THD_SET2,
+ DVBT_TRK_KC_P2,
+ DVBT_TRK_KC_I2,
+ DVBT_CR_THD_SET2,
+ DVBT_PSET_IFFREQ,
+ DVBT_SPEC_INV,
+ DVBT_BW_INDEX,
+ DVBT_RSAMP_RATIO,
+ DVBT_CFREQ_OFF_RATIO,
+ DVBT_FSM_STAGE,
+ DVBT_RX_CONSTEL,
+ DVBT_RX_HIER,
+ DVBT_RX_C_RATE_LP,
+ DVBT_RX_C_RATE_HP,
+ DVBT_GI_IDX,
+ DVBT_FFT_MODE_IDX,
+ DVBT_RSD_BER_EST,
+ DVBT_CE_EST_EVM,
+ DVBT_RF_AGC_VAL,
+ DVBT_IF_AGC_VAL,
+ DVBT_DAGC_VAL,
+ DVBT_SFREQ_OFF,
+ DVBT_CFREQ_OFF,
+ DVBT_POLAR_RF_AGC,
+ DVBT_POLAR_IF_AGC,
+ DVBT_AAGC_HOLD,
+ DVBT_EN_RF_AGC,
+ DVBT_EN_IF_AGC,
+ DVBT_IF_AGC_MIN,
+ DVBT_IF_AGC_MAX,
+ DVBT_RF_AGC_MIN,
+ DVBT_RF_AGC_MAX,
+ DVBT_IF_AGC_MAN,
+ DVBT_IF_AGC_MAN_VAL,
+ DVBT_RF_AGC_MAN,
+ DVBT_RF_AGC_MAN_VAL,
+ DVBT_DAGC_TRG_VAL,
+ DVBT_AGC_TARG_VAL,
+ DVBT_LOOP_GAIN_3_0,
+ DVBT_LOOP_GAIN_4,
+ DVBT_VTOP,
+ DVBT_KRF,
+ DVBT_AGC_TARG_VAL_0,
+ DVBT_AGC_TARG_VAL_8_1,
+ DVBT_AAGC_LOOP_GAIN,
+ DVBT_LOOP_GAIN2_3_0,
+ DVBT_LOOP_GAIN2_4,
+ DVBT_LOOP_GAIN3,
+ DVBT_VTOP1,
+ DVBT_VTOP2,
+ DVBT_VTOP3,
+ DVBT_KRF1,
+ DVBT_KRF2,
+ DVBT_KRF3,
+ DVBT_KRF4,
+ DVBT_EN_GI_PGA,
+ DVBT_THD_LOCK_UP,
+ DVBT_THD_LOCK_DW,
+ DVBT_THD_UP1,
+ DVBT_THD_DW1,
+ DVBT_INTER_CNT_LEN,
+ DVBT_GI_PGA_STATE,
+ DVBT_EN_AGC_PGA,
+ DVBT_CKOUTPAR,
+ DVBT_CKOUT_PWR,
+ DVBT_SYNC_DUR,
+ DVBT_ERR_DUR,
+ DVBT_SYNC_LVL,
+ DVBT_ERR_LVL,
+ DVBT_VAL_LVL,
+ DVBT_SERIAL,
+ DVBT_SER_LSB,
+ DVBT_CDIV_PH0,
+ DVBT_CDIV_PH1,
+ DVBT_MPEG_IO_OPT_2_2,
+ DVBT_MPEG_IO_OPT_1_0,
+ DVBT_CKOUTPAR_PIP,
+ DVBT_CKOUT_PWR_PIP,
+ DVBT_SYNC_LVL_PIP,
+ DVBT_ERR_LVL_PIP,
+ DVBT_VAL_LVL_PIP,
+ DVBT_CKOUTPAR_PID,
+ DVBT_CKOUT_PWR_PID,
+ DVBT_SYNC_LVL_PID,
+ DVBT_ERR_LVL_PID,
+ DVBT_VAL_LVL_PID,
+ DVBT_SM_PASS,
+ DVBT_UPDATE_REG_2,
+ DVBT_BTHD_P3,
+ DVBT_BTHD_D3,
+ DVBT_FUNC4_REG0,
+ DVBT_FUNC4_REG1,
+ DVBT_FUNC4_REG2,
+ DVBT_FUNC4_REG3,
+ DVBT_FUNC4_REG4,
+ DVBT_FUNC4_REG5,
+ DVBT_FUNC4_REG6,
+ DVBT_FUNC4_REG7,
+ DVBT_FUNC4_REG8,
+ DVBT_FUNC4_REG9,
+ DVBT_FUNC4_REG10,
+ DVBT_FUNC5_REG0,
+ DVBT_FUNC5_REG1,
+ DVBT_FUNC5_REG2,
+ DVBT_FUNC5_REG3,
+ DVBT_FUNC5_REG4,
+ DVBT_FUNC5_REG5,
+ DVBT_FUNC5_REG6,
+ DVBT_FUNC5_REG7,
+ DVBT_FUNC5_REG8,
+ DVBT_FUNC5_REG9,
+ DVBT_FUNC5_REG10,
+ DVBT_FUNC5_REG11,
+ DVBT_FUNC5_REG12,
+ DVBT_FUNC5_REG13,
+ DVBT_FUNC5_REG14,
+ DVBT_FUNC5_REG15,
+ DVBT_FUNC5_REG16,
+ DVBT_FUNC5_REG17,
+ DVBT_FUNC5_REG18,
+ DVBT_AD7_SETTING,
+ DVBT_RSSI_R,
+ DVBT_ACI_DET_IND,
+ DVBT_REG_MON,
+ DVBT_REG_MONSEL,
+ DVBT_REG_GPE,
+ DVBT_REG_GPO,
+ DVBT_REG_4MSEL,
+ DVBT_TEST_REG_1,
+ DVBT_TEST_REG_2,
+ DVBT_TEST_REG_3,
+ DVBT_TEST_REG_4,
+ DVBT_REG_BIT_NAME_ITEM_TERMINATOR,
+};
+
+
+/* Register table length */
+#define RTL2832_REG_TABLE_LEN DVBT_REG_BIT_NAME_ITEM_TERMINATOR
+
+typedef struct
+{
+ u8 page;
+ u8 start_address;
+ u8 msb;
+ u8 lsb;
+}
+rtl2832_reg_entry;
+
+typedef struct
+{
+ int reg;
+ u32 value;
+}
+rtl2832_reg_value;
+
+
+
+
+
+#endif /* RTL2832_H */
diff --git a/drivers/media/dvb/frontends/rtl2832_priv.h
b/drivers/media/dvb/frontends/rtl2832_priv.h
new file mode 100644
index 0000000..2f591c6
--- /dev/null
+++ b/drivers/media/dvb/frontends/rtl2832_priv.h
@@ -0,0 +1,60 @@
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef RTL2832_PRIV_H
+#define RTL2832_PRIV_H
+
+#include "dvb_frontend.h"
+#include "rtl2832.h"
+
+#define LOG_PREFIX "rtl2832"
+
+#undef dbg
+#define dbg(f, arg...) \
+ if (rtl2832_debug) \
+ printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef err
+#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+struct rtl2832_priv {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend fe;
+ struct rtl2832_config cfg;
+
+ bool i2c_gate_state;
+ bool sleeping;
+
+ u32 xtal;
+
+ u8 tuner;
+ u8 page; /* active register page */
+};
+
+struct rtl2832_reg_val_mask {
+ u16 reg;
+ u8 val;
+ u8 mask;
+};
+
+#endif /* RTL2832_PRIV_H */
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
