Hi Steve, On Fri, Apr 20, 2012 at 12:11:38PM +0200, Steve Lindell wrote: > Hi! I'm developing a mipi csi2 receiver for test purpose and need some > help of how to capture the data stream from a camera module. I'm using a > phytec board with a Omap4430 processor running Linux kernel 3.0.9. > Connected to the MIPI lanes I have a camera module (soled on a flexfilm) > The camera follows the Mipi csi2 specs and is controlled via an external > I2C controller. I have activated the camera and its now transmitting a > test pattern on the Mipi lines (4 line connection). > > I need to capture the stream and store it as a Raw Bayer snapshot. Is this > possible use Omap4430 and does Linux have the necessary drivers to capture > the stream. If this driver exists are there any documentation of how to > implement the driver? > > Is it possible to get some help of how to get started? Sergio Aguirre has posted the patches for the Omap 4 Iss to this list some time ago. I believe you'll also be able to find them here: <URL:https://gitorious.org/omap4-v4l2-camera/pages/Home> I guess you'd be also better off using a newer kernel than that. Hope this helps... Cc Sergio. Regards, -- Sakari Ailus e-mail: sakari.ailus@xxxxxx jabber/XMPP/Gmail: sailus@xxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html