Re: [PATCH 08/11] v4l: vb2-dma-contig: add support for scatterlist in userptr mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,
Thank you for review. Your comments are very helpful :).
Take a look on the comments below.

On 04/06/2012 05:02 PM, Laurent Pinchart wrote:
> Hi Tomasz,
> 
> On Thursday 05 April 2012 16:00:05 Tomasz Stanislawski wrote:
>> From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
>>
>> This patch introduces usage of dma_map_sg to map memory behind
>> a userspace pointer to a device as dma-contiguous mapping.
>>
>> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
>> 	[bugfixing]
>> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
>> 	[bugfixing]
>> Signed-off-by: Tomasz Stanislawski <t.stanislaws@xxxxxxxxxxx>
>> 	[add sglist subroutines/code refactoring]
>> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> ---
>>  drivers/media/video/videobuf2-dma-contig.c |  282 +++++++++++++++++++++++--
>>  1 files changed, 265 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/video/videobuf2-dma-contig.c
>> b/drivers/media/video/videobuf2-dma-contig.c index 476e536..6ab3165 100644
>> --- a/drivers/media/video/videobuf2-dma-contig.c
>> +++ b/drivers/media/video/videobuf2-dma-contig.c
> 
> [snip]
> 
>> @@ -32,6 +36,98 @@ struct vb2_dc_buf {
>>  };
>>
>>  /*********************************************/
>> +/*        scatterlist table functions        */
>> +/*********************************************/
>> +
>> +static struct sg_table *vb2_dc_pages_to_sgt(struct page **pages,
>> +	unsigned long n_pages, size_t offset, size_t offset2)
> 
> "offset2" isn't very descriptive. I would replace it with the total size of 
> the buffer instead (or, alternatively, rename offset to offset_start and 
> offset2 to offset_end, but I like the first option better).
> 
>> +{
>> +	struct sg_table *sgt;
>> +	int i, j; /* loop counters */
> 
> I don't think the comment is needed.
> 

ok

>> +	int cur_page, chunks;
> 
> i, j, cur_page and chunks can't be negative. Could you please make them 
> unsigned int (and I would order them) ?

ok

> 
> Also, Documentation/CodingStyle favors one variable declaration per line, 
> without commas for multiple declarations.

does it include loop counters like i and j?

> 
>> +	int ret;
>> +	struct scatterlist *s;
>> +
>> +	sgt = kzalloc(sizeof *sgt, GFP_KERNEL);
>> +	if (!sgt)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	/* compute number of chunks */
>> +	chunks = 1;
>> +	for (i = 1; i < n_pages; ++i)
>> +		if (pages[i] != pages[i - 1] + 1)
>> +			++chunks;
>> +
>> +	ret = sg_alloc_table(sgt, chunks, GFP_KERNEL);
>> +	if (ret) {
>> +		kfree(sgt);
>> +		return ERR_PTR(-ENOMEM);
>> +	}
>> +
>> +	/* merging chunks and putting them into the scatterlist */
>> +	cur_page = 0;
>> +	for_each_sg(sgt->sgl, s, sgt->orig_nents, i) {
>> +		size_t size = PAGE_SIZE;
>> +
>> +		for (j = cur_page + 1; j < n_pages; ++j) {
>> +			if (pages[j] != pages[j - 1] + 1)
>> +				break;
>> +			size += PAGE_SIZE;
>> +		}
>> +
>> +		/* cut offset if chunk starts at the first page */
>> +		if (cur_page == 0)
>> +			size -= offset;
>> +		/* cut offset2 if chunk ends at the last page */
>> +		if (j == n_pages)
>> +			size -= offset2;
>> +
>> +		sg_set_page(s, pages[cur_page], size, offset);
>> +		offset = 0;
>> +		cur_page = j;
>> +	}
>> +
>> +	return sgt;
>> +}
>> +
>> +static void vb2_dc_release_sgtable(struct sg_table *sgt)
>> +{
>> +	sg_free_table(sgt);
>> +	kfree(sgt);
>> +}
>> +
>> +static void vb2_dc_sgt_foreach_page(struct sg_table *sgt,
>> +	void (*cb)(struct page *pg))
>> +{
>> +	struct scatterlist *s;
>> +	int i, j;
>> +
>> +	for_each_sg(sgt->sgl, s, sgt->nents, i) {
>> +		struct page *page = sg_page(s);
>> +		int n_pages = PAGE_ALIGN(s->offset + s->length) >> PAGE_SHIFT;
>> +
>> +		for (j = 0; j < n_pages; ++j, ++page)
>> +			cb(page);
> 
> Same for i, j and n_pages here.
> 

ok

>> +	}
>> +}
>> +
>> +static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt)
>> +{
>> +	struct scatterlist *s;
>> +	dma_addr_t expected = sg_dma_address(sgt->sgl);
>> +	int i;
> 
> Same for i here.
> 
>> +	unsigned long size = 0;
>> +
>> +	for_each_sg(sgt->sgl, s, sgt->nents, i) {
>> +		if (sg_dma_address(s) != expected)
>> +			break;
>> +		expected = sg_dma_address(s) + sg_dma_len(s);
>> +		size += sg_dma_len(s);
>> +	}
>> +	return size;
>> +}
>> +
>> +/*********************************************/
>>  /*         callbacks for all buffers         */
>>  /*********************************************/
>>
>> @@ -116,42 +212,194 @@ static int vb2_dc_mmap(void *buf_priv, struct
>> vm_area_struct *vma) /*       callbacks for USERPTR buffers       */
>>  /*********************************************/
>>
>> +static inline int vma_is_io(struct vm_area_struct *vma)
>> +{
>> +	return !!(vma->vm_flags & (VM_IO | VM_PFNMAP));
>> +}
>> +
>> +static struct vm_area_struct *vb2_dc_get_user_vma(
>> +	unsigned long start, unsigned long size)
>> +{
>> +	struct vm_area_struct *vma;
>> +
>> +	/* current->mm->mmap_sem is taken by videobuf2 core */
>> +	vma = find_vma(current->mm, start);
>> +	if (!vma) {
>> +		printk(KERN_ERR "no vma for address %lu\n", start);
>> +		return ERR_PTR(-EFAULT);
>> +	}
>> +
>> +	if (vma->vm_end - vma->vm_start < size) {
>> +		printk(KERN_ERR "vma at %lu is too small for %lu bytes\n",
>> +			start, size);
>> +		return ERR_PTR(-EFAULT);
>> +	}
> 
> Should we support multiple VMAs, or do you think that's not worth it ?
> 

What do you mean by multiple VMAs?

>> +	vma = vb2_get_vma(vma);
>> +	if (!vma) {
>> +		printk(KERN_ERR "failed to copy vma\n");
>> +		return ERR_PTR(-ENOMEM);
>> +	}
> 
> I still think there's no need to copy the VMA. get_user_pages() will make sure 
> the memory doesn't get paged out, and we don't need to ensure that the 
> userspace mapping stays in place as our cache operations use a scatter list. 
> Storing the result of vma_is_io() in vb2_dc_buf should be enough.

As I understand calling get_user_pages ensures that pages are not going to be
swapped or freed. I agree that it provides enough protection for the memory.

IO mappings are the problem. As you mentioned few mails ago get_page would
likely crash for such pages. AFAIK increasing reference count for VMA could be
a reliable mechanism for protecting the memory from being freed.
The problem is that VMA has no reference counters in it. Calling open ops
will protect the memory. However it will not protect VMA structure from
being freed!

Analyze following scenario:

- mmap -> returns userptr
- qbuf (userptr)
- unmap (userptr)
- dqbuf

The VMA will be destroyed at unmap but memory will not be released.
The reason is that open ops was called at qbuf.
In order to free the memory the VB2 has to call close ops. This
callback takes pointer to VMA as an argument. The original VMA
cannot be used here because it is not longer valid.

Therefore VMA has to be copied at qbuf operation. The function vb2_get_vma
is used for this purpose.

The workaround could be dropping support for IO mappings in VB2.
However it will handicap all s5p media drivers because mapping
produced by dma_mmap_coherent (aka writecombine) are IO mapping.
As result s5p-fimc could no longer create a pipeline with s5p-mfc.

Introducing DMABUF to V4L is a good alternative but only if exporting
is supported.

For now I think it is better to keep support for IO mappings. At least
until DMA mapping redesign and DMABUF exporting in V4L is merged.

> 
>> +	return vma;
>> +}
>> +
>> +static int vb2_dc_get_user_pages(unsigned long start, struct page **pages,
>> +	int n_pages, struct vm_area_struct *vma, int write)
>> +{
>> +	int n;
> 
> n_pages and n can be unsigned (and I would rename n to i, to be coherent with 
> the rest of the file).
> 

ok

>> +
>> +	if (vma_is_io(vma)) {
>> +		for (n = 0; n < n_pages; ++n, start += PAGE_SIZE) {
>> +			unsigned long pfn;
>> +			int ret = follow_pfn(vma, start, &pfn);
>> +
>> +			if (ret) {
>> +				printk(KERN_ERR "no page for address %lu\n",
>> +					start);
>> +				return ret;
>> +			}
>> +			pages[n] = pfn_to_page(pfn);
>> +		}
>> +	} else {
>> +		n = get_user_pages(current, current->mm, start & PAGE_MASK,
>> +			n_pages, write, 1, pages, NULL);
>> +		if (n != n_pages) {
>> +			printk(KERN_ERR "got only %d of %d user pages\n",
>> +				n, n_pages);
>> +			while (n)
>> +				put_page(pages[--n]);
>> +			return -EFAULT;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void vb2_dc_set_page_dirty(struct page *page)
>> +{
>> +	set_page_dirty_lock(page);
>> +}
>> +
>> +static void vb2_dc_put_userptr(void *buf_priv)
>> +{
>> +	struct vb2_dc_buf *buf = buf_priv;
>> +	struct sg_table *sgt = buf->dma_sgt;
>> +
>> +	dma_unmap_sg(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
>> +	if (!vma_is_io(buf->vma)) {
>> +		vb2_dc_sgt_foreach_page(sgt, vb2_dc_set_page_dirty);
>> +		vb2_dc_sgt_foreach_page(sgt, put_page);
> 
> This results in two iterations over the pages. Wouldn't it better to fold the 
> vb2_dc_sgt_foreach_page() function into this one, and loop once only ? 
> vb2_dc_sgt_foreach_page() is also called in the cleanup path of 
> vb2_dc_get_userptr(), but you have the list of pages available in the 
> function, so you can iterate over it directly.
> 

what do you think about using function vb2_dc_put_dirty_page which
would call both set_page_dirty_lock and put_page ?

>> +	}
>> +
>> +	vb2_dc_release_sgtable(sgt);
>> +	vb2_put_vma(buf->vma);
>> +	kfree(buf);
>> +}
>> +
>>  static void *vb2_dc_get_userptr(void *alloc_ctx, unsigned long vaddr,
>> -					unsigned long size, int write)
>> +	unsigned long size, int write)
>>  {
>>  	struct vb2_dc_buf *buf;
>> -	struct vm_area_struct *vma;
>> -	dma_addr_t dma_addr = 0;
>> -	int ret;
>> +	unsigned long start, end, offset, offset2;
> 
> If you don't use the buffer size above, please rename offset2 here too (and 
> avoid multiple variable declarations per line).
> 

ok

>> +	struct page **pages;
>> +	int n_pages;
>> +	int ret = 0;
>> +	struct sg_table *sgt;
>> +	unsigned long contig_size;
>>
>>  	buf = kzalloc(sizeof *buf, GFP_KERNEL);
>>  	if (!buf)
>>  		return ERR_PTR(-ENOMEM);
>>
>> -	ret = vb2_get_contig_userptr(vaddr, size, &vma, &dma_addr);
>> +	buf->dev = alloc_ctx;
>> +	buf->dma_dir = write ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
>> +
>> +	start = (unsigned long)vaddr & PAGE_MASK;
>> +	offset = (unsigned long)vaddr & ~PAGE_MASK;
>> +	end = PAGE_ALIGN((unsigned long)vaddr + size);
>> +	offset2 = end - (unsigned long)vaddr - size;
> 
> vaddr is already an unsigned long, there's no need to cast it.
> 

roger that

>> +	n_pages = (end - start) >> PAGE_SHIFT;
>> +
>> +	pages = kmalloc(n_pages * sizeof pages[0], GFP_KERNEL);
>> +	if (!pages) {
>> +		ret = -ENOMEM;
>> +		printk(KERN_ERR "failed to allocate pages table\n");
>> +		goto fail_buf;
>> +	}
>> +
>> +	buf->vma = vb2_dc_get_user_vma(start, end - start);
>> +	if (IS_ERR(buf->vma)) {
>> +		printk(KERN_ERR "failed to get VMA\n");
>> +		ret = PTR_ERR(buf->vma);
>> +		goto fail_pages;
>> +	}
>> +
>> +	/* extract page list from userspace mapping */
>> +	ret = vb2_dc_get_user_pages(start, pages, n_pages, buf->vma, write);
>>  	if (ret) {
>> -		printk(KERN_ERR "Failed acquiring VMA for vaddr 0x%08lx\n",
>> -				vaddr);
>> -		kfree(buf);
>> -		return ERR_PTR(ret);
>> +		printk(KERN_ERR "failed to get user pages\n");
>> +		goto fail_vma;
>> +	}
>> +
>> +	sgt = vb2_dc_pages_to_sgt(pages, n_pages, offset, offset2);
>> +	if (IS_ERR(sgt)) {
>> +		printk(KERN_ERR "failed to create scatterlist table\n");
>> +		ret = -ENOMEM;
>> +		goto fail_get_user_pages;
>> +	}
>> +
>> +	/* pages are no longer needed */
>> +	kfree(pages);
>> +	pages = NULL;
>> +
>> +	sgt->nents = dma_map_sg(buf->dev, sgt->sgl, sgt->orig_nents,
>> +		buf->dma_dir);
>> +	if (sgt->nents <= 0) {
>> +		printk(KERN_ERR "failed to map scatterlist\n");
>> +		ret = -EIO;
>> +		goto fail_sgt;
>> +	}
>> +
>> +	contig_size = vb2_dc_get_contiguous_size(sgt);
>> +	if (contig_size < size) {
>> +		printk(KERN_ERR "contiguous mapping is too small %lu/%lu\n",
>> +			contig_size, size);
>> +		ret = -EFAULT;
>> +		goto fail_map_sg;
>>  	}
>>
>> +	buf->dma_addr = sg_dma_address(sgt->sgl);
>>  	buf->size = size;
>> -	buf->dma_addr = dma_addr;
>> -	buf->vma = vma;
>> +	buf->dma_sgt = sgt;
>> +
>> +	atomic_inc(&buf->refcount);
> 
> refcount is only used for MMAP buffers as far as I can tell, I don't think you 
> need to increment refcount here.

right ... thanks for spotting it.
Fortunately, that put_userptr does not check this counter. Otherwise it would
be a memleak :).

>>
>>  	return buf;
>> -}
>>
>> -static void vb2_dc_put_userptr(void *mem_priv)
>> -{
>> -	struct vb2_dc_buf *buf = mem_priv;
>> +fail_map_sg:
>> +	dma_unmap_sg(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir);
>>
>> -	if (!buf)
>> -		return;
>> +fail_sgt:
>> +	if (!vma_is_io(buf->vma))
>> +		vb2_dc_sgt_foreach_page(sgt, put_page);
>> +	vb2_dc_release_sgtable(sgt);
>> +
>> +fail_get_user_pages:
>> +	if (pages && !vma_is_io(buf->vma))
>> +		while (n_pages)
>> +			put_page(pages[--n_pages]);
>>
>> +fail_vma:
>>  	vb2_put_vma(buf->vma);
>> +
>> +fail_pages:
>> +	kfree(pages); /* kfree is NULL-proof */
>> +
>> +fail_buf:
>>  	kfree(buf);
>> +
>> +	return ERR_PTR(ret);
>>  }
>>
>>  /*********************************************/

Regards,
Tomasz Stanislawski
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux