On Tue, Apr 10, 2012 at 3:49 PM, Stefan Monnier <monnier@xxxxxxxxxxxxxxxx> wrote: >> Ok, so it's an em2874/drx-j/tda18271 design, which in terms of the >> components is very similar to the PCTV 80e (which I believe Mauro got >> into staging recently). I would probably recommend looking at that >> code as a starting point. > > Any pointers to actual file names? > >> That said, you'll need to figure out the correct IF frequency, the >> drx-j configuration block, the GPIO layout, and the correct tuner >> config. If those terms don't mean anything to you, then you are best >> to wait until some developer stumbles across the device and has the >> time to add the needed support. > > The words aren't meaningless to me, but not too far either. Maybe if > someone could give me pointers as to how I could try to figure out the > corresponding info, I could give it a try. Probably useful to start with the config from a similar card (lots of vendors use the same reference design) and see how much of it works then tweak from there until you get it fully working. Alex -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
