Unfortunatly I am not familiar with the dib0700 device, so not sure if
you need firmware (I assume so, check linuxtv wiki on any dib0700 device.
To test the device in its most basic level, I think w_scan is the best
bet, as it works without any other extra files.
Oliver
On 07-04-12 23:32, Jan Prunk wrote:
Hi Oliver !
Thank you for your quick response.
I assume that mine is a non-plus version.
Do you know how I could proceed tuning the channel list,
which I could then use in the combination with MPlayer ?
Kind regards,
Jan
On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl<oliverlist@xxxxxxxxxxx> wrote:
Hi Jan,
That page is probably not supported by linux-media and shows support
(currently not working afaik) forthe U3100 mini PLUS. yes, minor difference
in name, huge difference inside. The non-plus is a dib0700 based device,
whereas the Plus is a af9035 based device. The non-plus should work out of
the box on most distro's.
Oliver
On 07-04-12 20:21, Jan Prunk wrote:
Hi !
I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T
TV streams with it on Debian. The dongle when its plugged in lights with
the green light. Performing "(dvb)scan" segfaults.
I (partially) followed these guides:
http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T
I am using debian testing and it seems the device gets somehow recognised:
[15120.976095] usb 3-1: USB disconnect, device number 2
[15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[15124.848958] usb 1-3: New USB device found, idVendor=0b05,
idProduct=173f
[15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[15124.848970] usb 1-3: Product: ASUS DVBT Tuner
[15124.848974] usb 1-3: Manufacturer: ASUSTeK
[15124.848977] usb 1-3: SerialNumber: 8500500875
[15125.344564] IR NEC protocol handler initialized
[15125.370992] IR RC5(x) protocol handler initialized
[15125.409376] dib0700: loaded with support for 21 different device-types
[15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
in cold state, will try to load a firmware
[15125.412893] IR RC6 protocol handler initialized
[15125.440888] IR JVC protocol handler initialized
[15125.463698] dvb-usb: downloading firmware from file
'dvb-usb-dib0700-1.20.fw'
[15125.465236] IR Sony protocol handler initialized
[15125.468745] IR MCE Keyboard/mouse protocol handler initialized
[15125.473597] lirc_dev: IR Remote Control driver registered, major 249
[15125.474883] IR LIRC bridge handler initialized
[15125.671203] dib0700: firmware started successfully.
[15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner'
in warm state.
[15126.172346] dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
[15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini
DVBT Tuner)
[15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[15126.607078] DiB0070: successfully identified
[15126.708031] Registered IR keymap rc-dib0700-rc5
[15126.708271] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12
[15126.709054] rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
[15126.710265] dvb-usb: schedule remote query interval to 50 msecs.
[15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner
successfully initialized and connected.
[15126.710492] usbcore: registered new interface driver dvb_usb_dib0700
[15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error
4 in libc-2.13.so[b75e2000+156000]
[15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error
4 in libc-2.13.so[b7631000+156000]
After this I used the guide at:
http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
Which resulted into:
yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana>
~/.tzap/channels.conf
scanning /usr/share/dvb/dvb-t/si-Ljubljana
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 602000000 0 2 9 3 1 3 0
initial transponder 514000000 0 2 9 3 1 2 0
tune to:
602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
tune to:
602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
(tuning failed)
WARNING:>>> tuning failed!!!
tune to:
514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
tune to:
514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING:>>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
So I seem to be stuck here.
I please for some guidance here, thank you !
Kind regards,
Jan Prunk
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
