Hi Oliver ! Thank you for your quick response. I assume that mine is a non-plus version. Do you know how I could proceed tuning the channel list, which I could then use in the combination with MPlayer ? Kind regards, Jan On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl <oliverlist@xxxxxxxxxxx> wrote: > Hi Jan, > > That page is probably not supported by linux-media and shows support > (currently not working afaik) forthe U3100 mini PLUS. yes, minor difference > in name, huge difference inside. The non-plus is a dib0700 based device, > whereas the Plus is a af9035 based device. The non-plus should work out of > the box on most distro's. > > Oliver > > > On 07-04-12 20:21, Jan Prunk wrote: >> >> Hi ! >> >> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T >> TV streams with it on Debian. The dongle when its plugged in lights with >> the green light. Performing "(dvb)scan" segfaults. >> >> I (partially) followed these guides: >> >> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T >> >> I am using debian testing and it seems the device gets somehow recognised: >> >> [15120.976095] usb 3-1: USB disconnect, device number 2 >> [15124.716041] usb 1-3: new high-speed USB device number 5 using ehci_hcd >> [15124.848958] usb 1-3: New USB device found, idVendor=0b05, >> idProduct=173f >> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2, >> SerialNumber=3 >> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner >> [15124.848974] usb 1-3: Manufacturer: ASUSTeK >> [15124.848977] usb 1-3: SerialNumber: 8500500875 >> [15125.344564] IR NEC protocol handler initialized >> [15125.370992] IR RC5(x) protocol handler initialized >> [15125.409376] dib0700: loaded with support for 21 different device-types >> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' >> in cold state, will try to load a firmware >> [15125.412893] IR RC6 protocol handler initialized >> [15125.440888] IR JVC protocol handler initialized >> [15125.463698] dvb-usb: downloading firmware from file >> 'dvb-usb-dib0700-1.20.fw' >> [15125.465236] IR Sony protocol handler initialized >> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized >> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249 >> [15125.474883] IR LIRC bridge handler initialized >> [15125.671203] dib0700: firmware started successfully. >> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' >> in warm state. >> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream >> to the software demuxer. >> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini >> DVBT Tuner) >> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... >> [15126.607078] DiB0070: successfully identified >> [15126.708031] Registered IR keymap rc-dib0700-rc5 >> [15126.708271] input: IR-receiver inside an USB DVB receiver as >> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12 >> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as >> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0 >> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs. >> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner >> successfully initialized and connected. >> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700 >> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error >> 4 in libc-2.13.so[b75e2000+156000] >> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error >> 4 in libc-2.13.so[b7631000+156000] >> >> After this I used the guide at: >> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device >> >> Which resulted into: >> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana> >> ~/.tzap/channels.conf >> scanning /usr/share/dvb/dvb-t/si-Ljubljana >> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >> initial transponder 602000000 0 2 9 3 1 3 0 >> initial transponder 514000000 0 2 9 3 1 2 0 >>>>> >>>>> tune to: >>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE >> >> WARNING:>>> tuning failed!!! >>>>> >>>>> tune to: >>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE >>>>> (tuning failed) >> >> WARNING:>>> tuning failed!!! >>>>> >>>>> tune to: >>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >> >> WARNING:>>> tuning failed!!! >>>>> >>>>> tune to: >>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>>> (tuning failed) >> >> WARNING:>>> tuning failed!!! >> ERROR: initial tuning failed >> dumping lists (0 services) >> Done. >> >> So I seem to be stuck here. >> >> I please for some guidance here, thank you ! >> >> Kind regards, >> Jan Prunk > > -- Jan Prunk http://www.prunk.si 0x00E80E86 http://pgp.prunk.si http://AS50763.peeringdb.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
