On Mon, Apr 2, 2012 at 2:24 PM, Gary Thomas <gary@xxxxxxxxxxxx> wrote: > Just to be clear - I did have to make a few patches to both the > TVP5150 driver and CCDC part of OMAP3ISP as some of the BT656 > support is still not in Laurent's tree. I'll send patches, etc, > once I get it working, but as mentioned above, at least at the > register level, these are set up the same as in my working tree. What patches did you add on top of Laurent tree? I had a look some days ago and for example it's missing the right setup for VD0/VD1 (no VD1 and VD0 set to half height), this could be the cause of a not working isp. You can check if you get interrupts from the isp (/proc/interrupts). Another thing that is missing is the logic in the irq handler that wait for a complete frame before calling next video buffer (or something like that). Enrico -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
