On 3/12/12, Alex Gershgorin <alexg@xxxxxxxxxxxxxx> wrote: > 1. Back resistor 172 to the default value. > > 2. Removed the resistor 146, through which a voltage was applied from a PMIC > (EXT_3V) on "CMOS_VIO". > > 3. Connecting a resistor 147 which supplies power from the LDO_3V3 on > "CMOS_VIO". The camera on the FSL BSP works fine with no hardware modification on the mx35pdk. As I suggested previously you should control the power rails, i2c pad settings, etc from software so that the camera can also work in mainline without the need of changing the hardware. > On my display I see snow flickering and unfortunately not a live video from > camera. Do you have this patch applied? http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=f910fb8fcd1c97788f2291c8646597bcd87ee061 Also, try to isolate the display from this issue. Capture the image to a file and try to play it on a PC. Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
