>On my mx31pdk I get the same dmaengine errors and the ov2640 does work fine. >I think you can go ahead and try to use the camera on the mx35pdk now. >You can try: >gst-launch -v v4l2src device=/dev/video0 ! >video/x-raw-yuv,width=320,height=240,framerate=25/1 ! ffmpegcolorspace >! fbdevsink <<Thank Fabio I'll try to check it. I tried to test it, everything is fine, just do not see the video on display. Here can see messages: Setting pipeline to PAUSED ...mx3-camera mx3-camera.0: MX3 Camera driver attached to camera 0 /GstPipeline:pipeline0/GstV4l2Src:v4l2src0.GstPad:src: caps = video/x-raw-yuv, format=(fourcc)UYVY, framerate=(fraction)25/1, width=(int)320, height=(int)240, interlaced=(boolean)false Pipeline is live and does not need PREROLL ... WARNING: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not get parameters on device '/dev/video0' Additional debug info: v4l2src_calls.c(240): gst_v4l2src_set_capture (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: system error: Invalid argument Setting pipeline to PLAYING ... New clock: GstSystemClock It works well :-) gst-launch videotestsrc ! fbdevsink Regards Alex Gershgorin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html