On Thursday 08 March 2012 19:22:53 Sakari Ailus wrote: > On Wed, Mar 07, 2012 at 03:24:29PM +0100, jean-philippe francois wrote: > > Le 6 mars 2012 18:08, jean-philippe francois <jp.francois@xxxxxxxxxx> a écrit : > > > Hi, > > > > > > I have a custom dm3730 board, running a 3.2.0 kernel. > > > The board is equipped with an aptina MT9J sensor on > > > parallel interface. > > > > > > Whenever I try to run yavta twice, the second run leads to a > > > soft lockup in omap3isp_video_queue_streamon (see below) > > > > > > What can I do / test to debug this issue ? > > > > Examining the offset, The code is stuck in the for_each loop, > > but I fail to see why. > > > > I added list manipulation and spinlock debugging, without detecting any > > problem. > > > > > # get.vga > > > Device /dev/video2 opened. > > > Device `OMAP3 ISP CCDC output' on `media' is a video capture device. > > > Video format set: SGRBG8 (47425247) 640x480 (stride 640) buffer size > > > 307200 > > > Video format: SGRBG8 (47425247) 640x480 (stride 640) buffer size 307200 > > > 3 buffers requested. > > > length: 307200 offset: 0 > > > Buffer 0 mapped at address 0x4023e000. > > > length: 307200 offset: 307200 > > > Buffer 1 mapped at address 0x4034d000. > > > length: 307200 offset: 614400 > > > Buffer 2 mapped at address 0x40444000. > > > 0 (0) [-] 4294967295 307200 bytes 100.397705 100.397796 7.817 fps > > > 1 (1) [-] 4294967295 307200 bytes 100.495666 100.495788 10.208 fps > > > 2 (2) [-] 4294967295 307200 bytes 100.593658 100.593750 10.205 fps > > > 3 (0) [-] 4294967295 307200 bytes 100.691619 100.691741 10.208 fps > > > 4 (1) [-] 4294967295 307200 bytes 100.789611 100.789703 10.205 fps > > > 5 (2) [-] 4294967295 307200 bytes 100.887573 100.887695 10.208 fps > > > 6 (0) [-] 4294967295 307200 bytes 100.985565 100.985656 10.205 fps > > > 7 (1) [-] 4294967295 307200 bytes 101.083526 101.083709 10.208 fps > > > 8 (2) [-] 4294967295 307200 bytes 101.181488 101.181610 10.208 fps > > > 9 (0) [-] 4294967295 307200 bytes 101.279480 101.279571 10.205 fps > > > Captured 10 frames in 1.009796 seconds (9.902989 fps, 3042198.137254 > > > B/s). > > > 3 buffers released. > > > [1]+ Done httpd > > > # get.vga > > > Device /dev/video2 opened. > > > Device `OMAP3 ISP CCDC output' on `media' is a video capture device. > > > Video format set: SGRBG8 (47425247) 640x480 (stride 640) buffer size > > > 307200 > > > Video format: SGRBG8 (47425247) 640x480 (stride 640) buffer size 307200 > > > 3 buffers requested. > > > length: 307200 offset: 0 > > > Buffer 0 mapped at address 0x40285000. > > > length: 307200 offset: 307200 > > > Buffer 1 mapped at address 0x40314000. > > > length: 307200 offset: 614400 > > > Buffer 2 mapped at address 0x403bb000. > > > BUG: soft lockup - CPU#0 stuck for 22s! [yavta:495] > > > Modules linked in: ks8851_mll omap3_isp fpgacam(O) > > > > > > Pid: 495, comm: yavta > > > CPU: 0 Tainted: G O (3.2.0 #52) > > > PC is at __do_softirq+0x50/0x110 > > > LR is at __do_softirq+0x38/0x110 > > > pc : [<c003746c>] lr : [<c0037454>] psr: 20000113 > > > sp : ce8e5c88 ip : cf406140 fp : 00000000 > > > r10: cee90800 r9 : 0000000a r8 : ce8e4000 > > > r7 : 00000002 r6 : 00000000 r5 : 00000000 r4 : 00000025 > > > r3 : c044e580 r2 : 00000000 r1 : 00000002 r0 : 00000000 > > > Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user > > > Control: 10c5387d Table: 8e858019 DAC: 00000015 > > > [<c00123b0>] (unwind_backtrace+0x0/0xec) from [<c00646c4>] > > > (watchdog_timer_fn+0xd8/0x128) > > > [<c00646c4>] (watchdog_timer_fn+0xd8/0x128) from [<c004e640>] > > > (__run_hrtimer+0x68/0xe4) > > > [<c004e640>] (__run_hrtimer+0x68/0xe4) from [<c004e8b0>] > > > (hrtimer_interrupt+0x11c/0x2a4) > > > [<c004e8b0>] (hrtimer_interrupt+0x11c/0x2a4) from [<c0018f44>] > > > (omap2_gp_timer_interrupt+0x24/0x34) > > > [<c0018f44>] (omap2_gp_timer_interrupt+0x24/0x34) from [<c0064df8>] > > > (handle_irq_event_percpu+0x28/0x110) > > > [<c0064df8>] (handle_irq_event_percpu+0x28/0x110) from [<c0064f34>] > > > (handle_irq_event+0x54/0x74) > > > [<c0064f34>] (handle_irq_event+0x54/0x74) from [<c00676f8>] > > > (handle_level_irq+0xb4/0x100) > > > [<c00676f8>] (handle_level_irq+0xb4/0x100) from [<c0064a28>] > > > (generic_handle_irq+0x28/0x30) > > > [<c0064a28>] (generic_handle_irq+0x28/0x30) from [<c000e570>] > > > (handle_IRQ+0x60/0x84) > > > [<c000e570>] (handle_IRQ+0x60/0x84) from [<c000d874>] > > > (__irq_svc+0x34/0x98) > > > [<c000d874>] (__irq_svc+0x34/0x98) from [<c003746c>] > > > (__do_softirq+0x50/0x110) [<c003746c>] (__do_softirq+0x50/0x110) from > > > [<c00376f0>] > > > (irq_exit+0x48/0x9c)omap3isp_video_queue_streamon > > > [<c00376f0>] (irq_exit+0x48/0x9c) from [<c000e574>] > > > (handle_IRQ+0x64/0x84) > > > [<c000e574>] (handle_IRQ+0x64/0x84) from [<c000d874>] > > > (__irq_svc+0x34/0x98) > > > [<c000d874>] (__irq_svc+0x34/0x98) from [<bf007864>] (+0x6c/0xa0 > > > [omap3_isp]) > As it's __irq_svc(), I'd guess it's stuck executing the ISP interrupt > handler. This shouldn't happen. > > Is the sensor a parallel one? > > There have been cases where bad hs / vs signals essentially cause the ISP > driver to stay in handling interrupts. Or rather to constantly re-enter the interrupt handler. Make sure that your sensor stops generating hsync/vsync signals when the stream is stopped, and also make sure that the hsync/vsync signals are either driven by the sensor or pulled up or low. > > > [<bf007864>] (omap3isp_video_queue_streamon+0x6c/0xa0 [omap3_isp]) > > > from [<bf0096cc>] (isp_video_streamon+0x178/0x258 [omap3_isp]) > > > [<bf0096cc>] (isp_video_streamon+0x178/0x258 [omap3_isp]) from > > > [<c022cae4>] (__video_do_ioctl+0x1b9c/0x4894) > > > [<c022cae4>] (__video_do_ioctl+0x1b9c/0x4894) from [<c022ae08>] > > > (video_usercopy+0x1b8/0x298) > > > [<c022ae08>] (video_usercopy+0x1b8/0x298) from [<c0229d48>] > > > (v4l2_ioctl+0x68/0x114) > > > [<c0229d48>] (v4l2_ioctl+0x68/0x114) from [<c00a2514>] > > > (vfs_ioctl+0x20/0x3c) [<c00a2514>] (vfs_ioctl+0x20/0x3c) from > > > [<c00a2d9c>] (do_vfs_ioctl+0x1ac/0x1c4) [<c00a2d9c>] > > > (do_vfs_ioctl+0x1ac/0x1c4) from [<c00a2de8>] (sys_ioctl+0x34/0x54) > > > [<c00a2de8>] (sys_ioctl+0x34/0x54) from [<c000dcc0>] > > > (ret_fast_syscall+0x0/0x30) Kernel panic - not syncing: softlockup: > > > hung tasks -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
