On Wed, Feb 8, 2012 at 10:32 PM, Torfinn Ingolfsen <tingox@xxxxxxxxx> wrote: > Do I need to do anything special to make this driver work? > I just installed the newest media drivers (by following instructions at > http://git.linuxtv.org/media_build.git) on a maxhine running Xubuntu 11.10: > tingo@kg-f4:~/work/media_ > build$ uname -a > Linux kg-f4 3.0.0-15-generic #26-Ubuntu SMP Fri Jan 20 17:23:00 UTC > 2012 x86_64 x86_64 x86_64 GNU/Linux > > This machine has a TerraTec H7 connected, lsusb shows: > tingo@kg-f4:~/work/media_build$ sudo lsusb -s 1:6 > Bus 001 Device 006: ID 0ccd:10a3 TerraTec Electronic GmbH > > But after installing the drivers, and after a reboot of the machine, > the dvb-usb-az6007 driver doesn't load. > If I manually do 'sudo modprobe dvb-usb-az6007', the driver loads, but > all I get in dmesg is this: > [ 1049.838911] WARNING: You are using an experimental version of the > media stack. > [ 1049.838917] As the driver is backported to an older kernel, it doesn't offer > [ 1049.838922] enough quality for its usage in production. > [ 1049.838925] Use it with care. > [ 1049.838928] Latest git patches (needed if you report a bug to > linux-media@xxxxxxxxxxxxxxx): > [ 1049.838932] 59b30294e14fa6a370fdd2bc2921cca1f977ef16 Merge branch > 'v4l_for_linus' into staging/for_v3.4 > [ 1049.838936] 72565224609a23a60d10fcdf42f87a2fa8f7b16d [media] > cxd2820r: sleep on DVB-T/T2 delivery system switch > [ 1049.838941] 46de20a78ae4b122b79fc02633e9a6c3d539ecad [media] > anysee: fix CI init > [ 1049.857524] IR NEC protocol handler initialized > [ 1049.892787] usbcore: registered new interface driver dvb_usb_az6007 > [ 1049.905264] IR RC5(x) protocol handler initialized > [ 1049.919476] IR RC6 protocol handler initialized > [ 1049.929152] IR JVC protocol handler initialized > [ 1049.943103] IR Sony protocol handler initialized > [ 1049.956308] IR SANYO protocol handler initialized > [ 1049.966667] IR MCE Keyboard/mouse protocol handler initialized > [ 1049.989256] lirc_dev: IR Remote Control driver registered, major 250 > [ 1050.003618] IR LIRC bridge handler initialized > [ 1445.609008] usb 1-2: USB disconnect, device number 5 > [ 1449.944046] usb 1-2: new high speed USB device number 6 using ehci_hcd > > and there aren't anything created in /dev/dvb. > > What am I doing wrong? Never mind. after adding this patch: http://patchwork.linuxtv.org/patch/9691/ and rebuilding the media drivers, the device is now detected: tingo@kg-f4:~$ dmesg | grep -i terratec [ 19.755806] dvb-usb: found a 'TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)' in warm state. [ 20.949045] DVB: registering new adapter (TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)) [ 23.732039] Registered IR keymap rc-nec-terratec-cinergy-xs [ 23.732442] dvb-usb: TerraTec DTV StarBox DVB-T/C USB2.0 (az6007) successfully initialized and connected. -- Regards, Torfinn Ingolfsen -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
