Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/dvb/dvb-usb/az6007.c | 3 +--
drivers/media/dvb/frontends/drxk.h | 4 +++-
drivers/media/dvb/frontends/drxk_hard.c | 12 ++++++------
3 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c
index 00a0bf1..bf8d201 100644
--- a/drivers/media/dvb/dvb-usb/az6007.c
+++ b/drivers/media/dvb/dvb-usb/az6007.c
@@ -69,6 +69,7 @@ static struct drxk_config terratec_h7_drxk = {
.single_master = true,
.no_i2c_bridge = false,
.chunk_size = 64,
+ .mpeg_out_clk_strength = 0x02,
.microcode_name = "dvb-usb-terratec-h7-az6007.fw",
};
@@ -278,12 +279,10 @@ static int az6007_led_on_off(struct usb_interface *intf, int onoff)
{
struct usb_device *udev = interface_to_usbdev(intf);
int ret;
-
/* TS through */
ret = az6007_write(udev, AZ6007_POWER, onoff, 0, NULL, 0);
if (ret < 0)
err("%s failed with error %d", __func__, ret);
-
return ret;
}
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
index 6b0fd2c..ca921c7 100644
--- a/drivers/media/dvb/frontends/drxk.h
+++ b/drivers/media/dvb/frontends/drxk.h
@@ -17,6 +17,7 @@
* @antenna_gpio: GPIO bit used to control the antenna
* @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1
* means that 1=DVBC, 0 = DVBT. Zero means the opposite.
+ * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
* @microcode_name: Name of the firmware file with the microcode
*
* On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
@@ -32,7 +33,8 @@ struct drxk_config {
bool antenna_dvbt;
u16 antenna_gpio;
- int chunk_size;
+ u8 mpeg_out_clk_strength;
+ int chunk_size;
const char *microcode_name;
};
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 6570396..d25b0d2 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -91,10 +91,6 @@ bool IsA1WithRomCode(struct drxk_state *state)
#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
#endif
-#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH
-#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06)
-#endif
-
#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
@@ -659,7 +655,6 @@ static int init_state(struct drxk_state *state)
u32 ulGPIOCfg = 0x0113;
u32 ulInvertTSClock = 0;
u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
- u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH;
u32 ulDVBTBitrate = 50000000;
u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
@@ -820,7 +815,6 @@ static int init_state(struct drxk_state *state)
state->m_DVBCBitrate = ulDVBCBitrate;
state->m_TSDataStrength = (ulTSDataStrength & 0x07);
- state->m_TSClockkStrength = (ulTSClockkStrength & 0x07);
/* Maximum bitrate in b/s in case static clockrate is selected */
state->m_mpegTsStaticBitrate = 19392658;
@@ -6394,6 +6388,12 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config,
state->m_DVBCStaticCLK = 1;
}
+
+ if (config->mpeg_out_clk_strength)
+ state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07;
+ else
+ state->m_TSClockkStrength = 0x06;
+
if (config->parallel_ts)
state->m_enableParallel = true;
else
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
