Move the ngene/ddbridge firmware into their drivers. There are two reasons for that: 1) The firmware used there didn't work for a few devices I tested here (Terratec H5, H6 and H7); 2) At least Terratec H7 doesn't seem to require a firmware for it to work. After this change, if firmware is not specified, the driver will use a rom-based firmware (this seems to be the case for Terratec H7, although I need to better check the USB dumps to be sure about that). In any case, the firmware seems to be optional, as the DRX-K driver don't return the firmware load error. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> --- drivers/media/dvb/ddbridge/ddbridge-core.c | 1 + drivers/media/dvb/dvb-usb/az6007.c | 8 +++++--- drivers/media/dvb/frontends/drxk_hard.c | 4 +--- drivers/media/dvb/ngene/ngene-cards.c | 1 + 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c index 2f31648..243dbb3 100644 --- a/drivers/media/dvb/ddbridge/ddbridge-core.c +++ b/drivers/media/dvb/ddbridge/ddbridge-core.c @@ -578,6 +578,7 @@ static int demod_attach_drxk(struct ddb_input *input) struct drxk_config config; memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; config.adr = 0x29 + (input->nr & 1); fe = input->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c index bb597c6..523972f 100644 --- a/drivers/media/dvb/dvb-usb/az6007.c +++ b/drivers/media/dvb/dvb-usb/az6007.c @@ -55,7 +55,8 @@ static struct drxk_config terratec_h7_drxk = { .adr = 0x29, .single_master = 1, .no_i2c_bridge = 0, - .microcode_name = "dvb-usb-terratec-h5-drxk.fw", + .max_size = 64, +// .microcode_name = "dvb-usb-terratec-h5-drxk.fw", }; static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) @@ -127,7 +128,8 @@ static int az6007_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, debug_dump(b, blen, deb_xfer); if (blen > 64) { - err("az6007: doesn't suport I2C transactions longer than 64 bytes\n"); + err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", + blen); return -EOPNOTSUPP; } @@ -395,6 +397,7 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap) adap->fe2->tuner_priv = adap->fe->tuner_priv; memcpy(&adap->fe2->ops.tuner_ops, &adap->fe->ops.tuner_ops, sizeof(adap->fe->ops.tuner_ops)); + return 0; out_free: @@ -572,7 +575,6 @@ static struct dvb_usb_device_properties az6007_properties = { .num_adapters = 1, .adapter = { { - /* .caps = DVB_USB_ADAP_RECEIVES_204_BYTE_TS, */ .streaming_ctrl = az6007_streaming_ctrl, .frontend_attach = az6007_frontend_attach, diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 6980ed7..4b99255 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -6070,9 +6070,7 @@ static int init_drxk(struct drxk_state *state) if (status < 0) goto error; - if (!state->microcode_name) - load_microcode(state, "drxk_a3.mc"); - else + if (state->microcode_name) load_microcode(state, state->microcode_name); /* disable token-ring bus through OFDM block for possible ucode upload */ diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c index 8418c02..7539a5d 100644 --- a/drivers/media/dvb/ngene/ngene-cards.c +++ b/drivers/media/dvb/ngene/ngene-cards.c @@ -216,6 +216,7 @@ static int demod_attach_drxk(struct ngene_channel *chan, struct drxk_config config; memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; config.adr = 0x29 + (chan->number ^ 2); chan->fe = dvb_attach(drxk_attach, &config, i2c); -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html